Slider plans??

Tankerblade · 11-15-2009, 02:59 PM

Since i want to start pushing my limits in the eep and i only have a 2wd... i want some protection. was looking at building a gastank skid plate and sliders. But i came up empty when it came to looking for plans with drawings/measurements for sliders. Anybody have any plans they're willing to share??

RENIXBEAST · 11-15-2009, 04:54 PM

slider plans

RENIXBEAST · 11-15-2009, 04:55 PM

Good Luck, Currently starting a set myself!!

goblazers_6 · 11-15-2009, 07:16 PM

Dude, skip the sliders and do a 4wd swap.

RENIXBEAST · 11-15-2009, 08:04 PM

X2

knucklehead 61 · 11-16-2009, 12:21 AM

i have a spare set i built for sale for $250
2x3x 1/4 wall main rails with 2" round outer tubes.
very strong.

Tankerblade · 11-16-2009, 07:52 AM

well, goblazer 6 its easy for you to do since you have money. im just a poor highschool kid that doesnt have money or a job.

goblazers_6 · 11-16-2009, 03:14 PM

Quote:

Originally Posted by Tankerblade

well, goblazer 6 its easy for you to do since you have money. im just a poor highschool kid that doesnt have money or a job.

I have money?!

That's a good one. Anyway, just slowly start collecting parts for the swap. A transfer case, a front axle, and front driveshaft (Those are your major components, your have little odds and ends too). All of those can be had from the junkyard or look on craigslist for good deals. I'm sure you can find some friendly CF or NAXJA guys that might even have extras lying around they'd be willing to give you. You should really look into it before you start thinking about sliders, its not as hard or expensive as you think.

Tankerblade · 11-16-2009, 04:15 PM

Quote:

Originally Posted by goblazers_6

I have money?!

That's a good one. Anyway, just slowly start collecting parts for the swap. A transfer case, a front axle, and front driveshaft (Those are your major components, your have little odds and ends too). All of those can be had from the junkyard or look on craigslist for good deals. I'm sure you can find some friendly CF or NAXJA guys that might even have extras lying around they'd be willing to give you. You should really look into it before you start thinking about sliders, its not as hard or expensive as you think.

Im well aware of the swap. but some very concerning guardians dont like the thought as it is too much money and work. I would do it in an instant if i could.

But since i dont have 4wd and i have a 2wd with a limited slip it'll have to do for now. My next thing is armor. here in AZ there's just too many rocks. allready have beaten up my crossmember and gas tank. so before i do any more damage i'd like to have protection

grn99 · 11-16-2009, 05:54 PM

I smell a Jeepspeed build.

ArmyLukehart · 11-16-2009, 10:06 PM

THATS WHAT IM SMELLING TOO!!!! WHOOOOOO HOOOOOOO.... Thats the route Im going with my 4x4..... but it will take me a couple years.

Tankerblade · 11-17-2009, 07:49 AM

i would love to do that....

Fred1diver · 11-17-2009, 08:06 AM

we want pics wben your done

I want to make some too
FRED

Tankerblade · 11-18-2009, 05:32 PM

Renix do you have pictures of sliders made from those plans??

RENIXBEAST · 11-23-2009, 11:18 AM

I dont I just got all the metal stock last week, but I just finished replacing my floors and painting the beast. I am just starting today but I will post picks as soon as I finish.

11-15-2009, 02:59 PM	#1
Tankerblade Seasoned Member Join Date: Apr 2009 Posts: 427 My Photos 2001 Cherokee Year: 2001 Model: Cherokee Engine: 4.0	Slider plans?? Since i want to start pushing my limits in the eep and i only have a 2wd... i want some protection. was looking at building a gastank skid plate and sliders. But i came up empty when it came to looking for plans with drawings/measurements for sliders. Anybody have any plans they're willing to share?? __________________ CAP SAR... Enough Said

11-15-2009, 04:54 PM	#2
RENIXBEAST Seasoned Member Join Date: Aug 2009 Location: Effingham, N.H. Posts: 302 My Photos 1989 Cherokee Year: 1989 Model: Cherokee Engine: 4.0 I6 Transmission: AW4 Auto Transfer Case: 242 Front Axle: HP D30 Rear Axle: d 35 non c clip Tires: 33/12.5/.15 BFG A/T's Lift Specifications: 6". 3.5" RE, 2" poly spacers. RE Leaf springs, 2" RC shackles Misc Accessories: RE Super flex control arms and RE trac bar, SYE upgraded double cardin driveshafts, Flowmaster 40	slider plans __________________ When all else fails hold it to the floor!!! 1989 Cherokee Pioneer, 4.0, AW4, 3.5" RE SF, 2" poly spacers, HP-D30/D35 non-"c" clip, 33/12.5/15,

11-15-2009, 04:55 PM	#3
RENIXBEAST Seasoned Member Join Date: Aug 2009 Location: Effingham, N.H. Posts: 302 My Photos 1989 Cherokee Year: 1989 Model: Cherokee Engine: 4.0 I6 Transmission: AW4 Auto Transfer Case: 242 Front Axle: HP D30 Rear Axle: d 35 non c clip Tires: 33/12.5/.15 BFG A/T's Lift Specifications: 6". 3.5" RE, 2" poly spacers. RE Leaf springs, 2" RC shackles Misc Accessories: RE Super flex control arms and RE trac bar, SYE upgraded double cardin driveshafts, Flowmaster 40	Good Luck, Currently starting a set myself!! __________________ When all else fails hold it to the floor!!! 1989 Cherokee Pioneer, 4.0, AW4, 3.5" RE SF, 2" poly spacers, HP-D30/D35 non-"c" clip, 33/12.5/15,

11-15-2009, 07:16 PM	#4
goblazers_6 Seasoned Member Join Date: Jul 2009 Location: Woodland, WA Posts: 348 My Photos 1994 Cherokee Year: 1994 Model: Cherokee Engine: 4.0HO Transmission: AW4 Transfer Case: NP231 Front Axle: HP 30 Rear Axle: 8.25 Tires: Stockers	Dude, skip the sliders and do a 4wd swap. __________________ - Darren - 94 XJ - 14" of lift 40" Groundhawgs stock axles and gearing - http://www.cherokeeforum.com/f46/simple-green-37445/ 87 MJ - Slammed with 100-Spoke Daytons - http://www.cherokeeforum.com/f46/mistress-moneypit-pavement-princess-19758/

11-15-2009, 08:04 PM	#5
RENIXBEAST Seasoned Member Join Date: Aug 2009 Location: Effingham, N.H. Posts: 302 My Photos 1989 Cherokee Year: 1989 Model: Cherokee Engine: 4.0 I6 Transmission: AW4 Auto Transfer Case: 242 Front Axle: HP D30 Rear Axle: d 35 non c clip Tires: 33/12.5/.15 BFG A/T's Lift Specifications: 6". 3.5" RE, 2" poly spacers. RE Leaf springs, 2" RC shackles Misc Accessories: RE Super flex control arms and RE trac bar, SYE upgraded double cardin driveshafts, Flowmaster 40	X2 __________________ When all else fails hold it to the floor!!! 1989 Cherokee Pioneer, 4.0, AW4, 3.5" RE SF, 2" poly spacers, HP-D30/D35 non-"c" clip, 33/12.5/15,

11-16-2009, 12:21 AM	#6
knucklehead 61 Newbie Join Date: Sep 2009 Posts: 11 My Photos	i have a spare set i built for sale for $250 2x3x 1/4 wall main rails with 2" round outer tubes. very strong.

11-16-2009, 07:52 AM	#7
Tankerblade Seasoned Member Join Date: Apr 2009 Posts: 427 My Photos 2001 Cherokee Year: 2001 Model: Cherokee Engine: 4.0	well, goblazer 6 its easy for you to do since you have money. im just a poor highschool kid that doesnt have money or a job. __________________ CAP SAR... Enough Said

11-16-2009, 05:54 PM	#10
grn99 Seasoned Member Join Date: Jan 2009 Location: Redford MI Posts: 486 My Photos 1999 Cherokee Year: 1999 Model: Cherokee Engine: 4.0 Transmission: aw4 Transfer Case: np231 Front Axle: dana30 Rear Axle: chry8.25 Tires: 265-75-16 Lift Specifications: 4.5 Rubicon Express Misc Accessories: A few	I smell a Jeepspeed build. __________________ look ma' no hands

11-16-2009, 10:06 PM	#11
ArmyLukehart Junior Member Join Date: Oct 2009 Posts: 33 My Photos 1998 Cherokee Year: 1998 Model: Cherokee Engine: 4.0 Transmission: stock? Transfer Case: Np231 I think it is? correct me please if I am wrong Front Axle: ?? Rear Axle: Chrystler 8.25 Tires: Mud King M/T's 33x12.50 Lift Specifications: Rough Country Extreme 6.5" lift	THATS WHAT IM SMELLING TOO!!!! WHOOOOOO HOOOOOOO.... Thats the route Im going with my 4x4..... but it will take me a couple years.

11-17-2009, 07:49 AM	#12
Tankerblade Seasoned Member Join Date: Apr 2009 Posts: 427 My Photos 2001 Cherokee Year: 2001 Model: Cherokee Engine: 4.0	i would love to do that.... __________________ CAP SAR... Enough Said

11-17-2009, 08:06 AM	#13
Fred1diver Member Join Date: Sep 2009 Location: Gatineau Posts: 117 My Photos 1996 Cherokee Year: 1996 Model: Cherokee Engine: 4.0 inline 6 Transmission: Auto Tires: Round rubber thingies	we want pics wben your done I want to make some too FRED

11-18-2009, 05:32 PM	#14
Tankerblade Seasoned Member Join Date: Apr 2009 Posts: 427 My Photos 2001 Cherokee Year: 2001 Model: Cherokee Engine: 4.0	Renix do you have pictures of sliders made from those plans?? __________________ CAP SAR... Enough Said

11-23-2009, 11:18 AM	#15
RENIXBEAST Seasoned Member Join Date: Aug 2009 Location: Effingham, N.H. Posts: 302 My Photos 1989 Cherokee Year: 1989 Model: Cherokee Engine: 4.0 I6 Transmission: AW4 Auto Transfer Case: 242 Front Axle: HP D30 Rear Axle: d 35 non c clip Tires: 33/12.5/.15 BFG A/T's Lift Specifications: 6". 3.5" RE, 2" poly spacers. RE Leaf springs, 2" RC shackles Misc Accessories: RE Super flex control arms and RE trac bar, SYE upgraded double cardin driveshafts, Flowmaster 40	I dont I just got all the metal stock last week, but I just finished replacing my floors and painting the beast. I am just starting today but I will post picks as soon as I finish. __________________ When all else fails hold it to the floor!!! 1989 Cherokee Pioneer, 4.0, AW4, 3.5" RE SF, 2" poly spacers, HP-D30/D35 non-"c" clip, 33/12.5/15,

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plans for my XJ	Roy94XJ	Cherokee Chat	4	09-18-2009 04:33 PM
pics of rock slider mounts	claygrassmann	Fabrication	1	07-22-2009 06:30 PM
pics of rock slider mounts	claygrassmann	Cherokee Tech	0	07-22-2009 11:01 AM
Rock slider question	TPD2129	Cherokee Tech	3	04-12-2009 01:49 PM
slider question	Irongrave	Cherokee Tech	4	09-03-2008 07:03 PM