ROLL CAGES
#16
Seasoned Member
Join Date: Sep 2009
Location: Here, no there, I don't know.
Posts: 432
Likes: 0
Received 2 Likes
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0
Hello,
Yes it is tied in under the floor.
In the front and middle, rear lands right on the shacle pocket.
The front bar is tight to the bottom of the steering, and well above the knee impact bolster provided by Jeep.
I have yet to knock my knees and I am 6' tall.
I kicked in the B pillar bars, so it lands on the unibody channel outer flange. As you can see in the picture of the tie in below.
I have another bunch of tube to triangulate and box in, still a work in progress, also should add a bunch of gussets.
Thanks
Nitro
PS: No prob, I have thick skin and have posted on Pirate, don't post if you can't handle it.
Yes it is tied in under the floor.
In the front and middle, rear lands right on the shacle pocket.
The front bar is tight to the bottom of the steering, and well above the knee impact bolster provided by Jeep.
I have yet to knock my knees and I am 6' tall.
I kicked in the B pillar bars, so it lands on the unibody channel outer flange. As you can see in the picture of the tie in below.
I have another bunch of tube to triangulate and box in, still a work in progress, also should add a bunch of gussets.
Thanks
Nitro
PS: No prob, I have thick skin and have posted on Pirate, don't post if you can't handle it.
#17
CF Veteran
Join Date: Jan 2009
Posts: 2,740
Likes: 0
Received 0 Likes
on
0 Posts
Year: 87
Model: Cherokee
Engine: 4.0
#18
Seasoned Member
Join Date: Sep 2009
Location: Here, no there, I don't know.
Posts: 432
Likes: 0
Received 2 Likes
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0
Pingpong
Here is the front tie in.
No Prob, No Hate percieved.
Like I said work in progress, just started getting heavy, with all the extra bars, need to go wheel so I put it back together with the basic cage.
Will get back to it.
Nitro
Here is the front tie in.
No Prob, No Hate percieved.
Like I said work in progress, just started getting heavy, with all the extra bars, need to go wheel so I put it back together with the basic cage.
Will get back to it.
Nitro
#19
CF Veteran
Join Date: Jan 2009
Posts: 2,740
Likes: 0
Received 0 Likes
on
0 Posts
Year: 87
Model: Cherokee
Engine: 4.0
I have bars going down the center. thebn off on 45* from them in the passenger ares.. I was worried about stuff comint threw. My cage is by no means perfect, but I am confident that it would take a serious/catastrophic roll and I would be able to walk away
#27
CF Veteran
Join Date: Feb 2010
Location: Soddy Daisy TN
Posts: 5,420
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0L