rocker repair

juggalo33438 · 09-22-2009, 08:17 PM

Ok so I've been slowly working on my jeep and I have a lot of questions. But for now the main one I'm worried about because I really would love to make myself a nice set of sliders, my entire rocker and floor is gone in my truck. I'm going ot be welding bed frame up into the remaining metal. How can I bolt/weld a slider onto my jeep if I do not have pinch seams? I see that all the kits bolt or weld to it? Will I have to find a way to weld them to my newly made rockers?

grn99 · 09-22-2009, 09:36 PM

Check out the Gen-Right sliders made for the XJ. They may give you an idea of what you need to do. Replace the floors than replace the rockers using 2x4 tube and acttach them to the chassis. You should plate the frame similar to how the Gen-right kit displays. I do not believe they are giong to make the kit advertised though.
I have been working on replacing mine also.

09-22-2009, 08:17 PM	#1
juggalo33438 Newbie Join Date: Sep 2009 Posts: 25 My Photos 1994 Cherokee Year: 1994 Model: Cherokee Engine: 4.0 HO Transmission: 5 speed Front Axle: d30 Rear Axle: d35 Tires: 23 :( Lift Specifications: 2 inch	rocker repair Ok so I've been slowly working on my jeep and I have a lot of questions. But for now the main one I'm worried about because I really would love to make myself a nice set of sliders, my entire rocker and floor is gone in my truck. I'm going ot be welding bed frame up into the remaining metal. How can I bolt/weld a slider onto my jeep if I do not have pinch seams? I see that all the kits bolt or weld to it? Will I have to find a way to weld them to my newly made rockers?

09-22-2009, 09:36 PM	#2
grn99 Seasoned Member Join Date: Jan 2009 Location: Redford MI Posts: 488 My Photos 1999 Cherokee Year: 1999 Model: Cherokee Engine: 4.0 Transmission: aw4 Transfer Case: np231 Front Axle: dana30 Rear Axle: chry8.25 Tires: 265-75-16 Lift Specifications: 4.5 Rubicon Express Misc Accessories: A few	Check out the Gen-Right sliders made for the XJ. They may give you an idea of what you need to do. Replace the floors than replace the rockers using 2x4 tube and acttach them to the chassis. You should plate the frame similar to how the Gen-right kit displays. I do not believe they are giong to make the kit advertised though. I have been working on replacing mine also. __________________ look ma' no hands

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rocker panel repair?Help	98CherokeeLimit4x4	Cherokee Tech	7	08-02-2009 02:43 PM
Rocker Arms	can'tstopjeepen	Cherokee Tech	0	02-01-2009 04:05 PM
Rocker Panels	forbyer	Cherokee Tech	0	11-28-2008 10:21 PM
HD Rocker	Mudhunter241	Cherokee Tech	5	11-16-2008 10:18 PM
Rocker panels	Olav	Cherokee Tech	2	11-16-2008 01:52 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)