noob shackle relocation
#1
Junior Member
Thread Starter
noob shackle relocation
I took a welding class about 2 years ago and haven't been welding since. With a weekend of no kids and wifes, I decided to mess around my rusty newbie welding skills. I set a goal to fab some shackle relocation...
I have an olde miller Dialarc 250 that can only do arc weld. It has been collecting dust since. I decided to give it a test before actually welding something for the Jeep, turn out I can't weld ****.
So I spent the whole Saturday burning electrode, trying to de-rust my welding skills. I get to the point I feel like I am welding something structurally sounds.
So I feel reasonably confident now. Here is the first weld. I am using 6010 and decided to have another run using 7018 on top of it. Also run another electrode inside the box... Will you trust it?
I have an olde miller Dialarc 250 that can only do arc weld. It has been collecting dust since. I decided to give it a test before actually welding something for the Jeep, turn out I can't weld ****.
So I spent the whole Saturday burning electrode, trying to de-rust my welding skills. I get to the point I feel like I am welding something structurally sounds.
So I feel reasonably confident now. Here is the first weld. I am using 6010 and decided to have another run using 7018 on top of it. Also run another electrode inside the box... Will you trust it?
#3
Junior Member
Thread Starter
Finish the welding part...
The weld looks like ****. But I think it bond enough metals to make it structurally sound. Looking at the shackle box we have in our cherokee, I think it should be strong enough...
The weld looks like ****. But I think it bond enough metals to make it structurally sound. Looking at the shackle box we have in our cherokee, I think it should be strong enough...
#4
CF Veteran
Join Date: Feb 2010
Location: Soddy Daisy TN
Posts: 5,420
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0L
I am a booger weld expert so I'm going to keep my mouth shut on that but my question is have you measured the shackle to see if it'll fit inside that box channel?
#5
::CF Administrator::
You said you're running 6010...what technique are you using to lay down the bead? Whip and pause works best with 6010, and it is a deep penetrating electrode. Looks like you were trying to do a whip and pause (somewhat) then a weave pattern. I will be the one to say it: practice some more before committing to this project. Suspension can see some crazy forces, you want a good, solid bead laid down, especially on your root pass. If the outside of your welds look like that, imagine what they look like inside, probably full of inclusions...that will weaken the weld significantly. Not trying to burn you, just trying to help. You don't have a lot of material into the project yet, so find some scrap and practice, practice, practice...also, what amperage are you running at?
#7
Junior Member
Thread Starter
You said you're running 6010...what technique are you using to lay down the bead? Whip and pause works best with 6010, and it is a deep penetrating electrode. Looks like you were trying to do a whip and pause (somewhat) than a weave pattern. I will be the one to say it: practice some more before committing to this project. Suspension can see some crazy forces, you want a good, solid bead laid down, especially on your root pass. If the outside of your welds look like that, imagine what they look like inside, probably full of inclusions...that will weaken the weld significantly. Not trying to burn you, just trying to help. You don't have a lot of material into the project yet, so find some scrap and practice, practice, practice...also, what amperage are you running at?
I don't have any confident driving the truck through potholes. Its not just supporting the 3800lb, its the force that pound on the joint when it hit the pothole. It's n times bigger than the stationary weight its supporting. Although it doesn't break, I feel like I am riding a time bomb. Like you said, I will probably practice, and I will do it again in clydesdale's style with several grade 8 bolt&nuts between two piece of metal as a fail safe.
Yes whip and pause and a weave pattern. I was using 100amp. I should've heat up the metal more and lower the amp?
I am going to skip the pictures of the finishing product since it's not a success. The next pics will probably a cut through the weld to see how bad it is.
Yes, but it's not worth mentioning. Its harder to lay good bead inside. I will consider its only a bit stronger than switches of tack weld. I thought they way I put the upper piece will have more metal bonding area compare to clydesdales. I think he has already thought it through.
Trending Topics
#8
::CF Administrator::
I need to shave down the shackle bushing a few mm to fit.
I was about to post some pics of the finishing product, but you are right.
I don't have any confident driving the truck through potholes. Its not just supporting the 3800lb, its the force that pound on the joint when it hit the pothole. It's n times bigger than the stationary weight its supporting. Although it doesn't break, I feel like I am riding a time bomb. Like you said, I will probably practice, and I will do it again in clydesdale's style with several grade 8 bolt&nuts between two piece of metal as a fail safe.
Yes whip and pause and a weave pattern. I was using 100amp. I should've heat up the metal more and lower the amp?
I am going to skip the pictures of the finishing product since it's not a success. The next pics will probably a cut through the weld to see how bad it is.
Yes, but it's not worth mentioning. Its harder to lay good bead inside. I will consider its only a bit stronger than switches of tack weld. I thought they way I put the upper piece will have more metal bonding area compare to clydesdales. I think he has already thought it through.
I was about to post some pics of the finishing product, but you are right.
I don't have any confident driving the truck through potholes. Its not just supporting the 3800lb, its the force that pound on the joint when it hit the pothole. It's n times bigger than the stationary weight its supporting. Although it doesn't break, I feel like I am riding a time bomb. Like you said, I will probably practice, and I will do it again in clydesdale's style with several grade 8 bolt&nuts between two piece of metal as a fail safe.
Yes whip and pause and a weave pattern. I was using 100amp. I should've heat up the metal more and lower the amp?
I am going to skip the pictures of the finishing product since it's not a success. The next pics will probably a cut through the weld to see how bad it is.
Yes, but it's not worth mentioning. Its harder to lay good bead inside. I will consider its only a bit stronger than switches of tack weld. I thought they way I put the upper piece will have more metal bonding area compare to clydesdales. I think he has already thought it through.
#9
Seasoned Member
Join Date: Aug 2013
Location: Duluth, MN
Posts: 452
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
https://www.youtube.com/user/welding...dtricks/videos
Watch every video. Multiple times. Soooo much information that has helped a lot of people out there just like you and I.
Weld on my friend.
Watch every video. Multiple times. Soooo much information that has helped a lot of people out there just like you and I.
Weld on my friend.
#11
Junior Member
Thread Starter
Don't be embarrassed to put up photos, it shows us what you're doing, and we can advise you better. Your amps are a little high, but workable...usually run between 80-90 amps on 6010, so you're not too bad there...I would say in this case, just practice some more...try welding in different positions, too, the best way to get a good bead is time behind the hood. Keep us posted on your progress.
https://www.youtube.com/user/welding...dtricks/videos
Watch every video. Multiple times. Soooo much information that has helped a lot of people out there just like you and I.
Weld on my friend.
Watch every video. Multiple times. Soooo much information that has helped a lot of people out there just like you and I.
Weld on my friend.
Well, here are the rest of pics:
After clean up, drilling all the holes
Painted, trying with the shackle
How much I have go grind down the bushing
Installed, test fitted
Hook up with shackle and spring
On its own weight
How it looks afterward
New metal supposed to be ordered to make relocation box v2.0 but I missed the golden period (thanksgiving holiday) to work on any welding!
I can't reverse it to stock because the bolt hole in the original box has been "loosen up"... The dangerous box will probably stay there for a while... that said, the truck will probably sit here for a while and I won't drive it unless its absolutely necessary...
hopefully I get some time to work on it xmas. otherwise it will be sometimes in spring
Last edited by yorkee; 12-01-2014 at 04:44 PM. Reason: Adding photos
#12
Thanks for the props Bud.
I'm glad our video helped you out.
I did weld every seam, inside and out. Maybe I should have showed more of that in the vid.
Boxing in the front and having a bolt through it made it a lot more ridged too.
Keep up the good work Pal.
I like how you started your own thread on this.
Subed.
And if your welds don't turn out, grind 'em out and do it again. There's no shame in that.
I'm glad our video helped you out.
I did weld every seam, inside and out. Maybe I should have showed more of that in the vid.
Boxing in the front and having a bolt through it made it a lot more ridged too.
Keep up the good work Pal.
I like how you started your own thread on this.
Subed.
And if your welds don't turn out, grind 'em out and do it again. There's no shame in that.
#13
Member
Join Date: Oct 2013
Location: Jasper AL
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
If I remember correctly it seems there used to be a 7018 AC rod on the market. When I had an AC buzz box I used some with great results. Also on this forum I have never heard mention of anyone using the local high school vocational welding classes to do any of their welding. I know here where I live the "trade School" as we call has an outstanding teacher and some of the kids are job ready welders way before they get out of high school. They are all the time doing projects and welding on things for people. Most of the time for free. Just a thought I had. Ive got 23 years exp at an electrical generating facility in maintenance. The old "its ugly as hell but strong" saying is bull crap. You have got to make every bead count. Esp when you are driving this thing down the highway. Not to seem critical but just encouraging everyone that welds on a component that is going to be on a vehicle to be extremely cautious.
#14
Junior Member
Thread Starter
Thanks for the props Bud.
I'm glad our video helped you out.
I did weld every seam, inside and out. Maybe I should have showed more of that in the vid.
Boxing in the front and having a bolt through it made it a lot more ridged too.
Keep up the good work Pal.
I like how you started your own thread on this.
Subed.
And if your welds don't turn out, grind 'em out and do it again. There's no shame in that.
I'm glad our video helped you out.
I did weld every seam, inside and out. Maybe I should have showed more of that in the vid.
Boxing in the front and having a bolt through it made it a lot more ridged too.
Keep up the good work Pal.
I like how you started your own thread on this.
Subed.
And if your welds don't turn out, grind 'em out and do it again. There's no shame in that.
Your video is very informative and it inspire me to do my own relocation. If you ever in Detroit area I have to buy you a drink because I owe you one (And I know what you like to drink!)
I start looking at some of your videos and its entertaining and informative (I will not order brake line from RC for that matter) I will have a pbr on hand while watching the next chapter
If I remember correctly it seems there used to be a 7018 AC rod on the market. When I had an AC buzz box I used some with great results. Also on this forum I have never heard mention of anyone using the local high school vocational welding classes to do any of their welding. I know here where I live the "trade School" as we call has an outstanding teacher and some of the kids are job ready welders way before they get out of high school. They are all the time doing projects and welding on things for people. Most of the time for free. Just a thought I had. Ive got 23 years exp at an electrical generating facility in maintenance. The old "its ugly as hell but strong" saying is bull crap. You have got to make every bead count. Esp when you are driving this thing down the highway. Not to seem critical but just encouraging everyone that welds on a component that is going to be on a vehicle to be extremely cautious.
Yes I agree with you. The only thing you can confirm rather your weld is strong enough is either x-ray or cut the weld. Neither is a real option for DIYer. So one has to have his trust and faith on his own weld and every bit counts.
hopefully I can get some work done during xmas... but I doubt it
Thread
Thread Starter
Forum
Replies
Last Post
studmuffin
Cherokee Chat
8
10-05-2015 01:54 PM
redrooster
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
10-02-2015 12:35 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)