This is how i want my rear bumper... - Page 5

fantic238 · 11-18-2009, 02:21 AM

Cool, what are those holes for?

fantic238 · 11-18-2009, 04:52 AM

Ok, there are two options for the mounts: the first is with four or six bolts along the side axis of the bumper, but i am not sure of the space i have to operate a wrench.

miglia-spyder · 11-18-2009, 07:53 AM

Quote:

Originally Posted by fantic238

Cool, what are those holes for?

Im guessing fog lights

Jeep85 · 11-19-2009, 04:47 AM

were can i get this program from looks like the ****

sluggy · 11-19-2009, 05:14 AM

nice work

miglia-spyder · 11-19-2009, 07:20 AM

Quote:

Originally Posted by Jeep85

were can i get this program from looks like the ****

Well I actually do it all on my free time at work!

But you could buy them...or get them bootleg from the internet.

I got lucky when i was in college and got all bootleg copies from my profesor.

You could also use some student versions... I think.

fantic238 · 11-19-2009, 08:09 AM

Pro/engineer is an expensive software. It works with a floating license (only on internet, and only during work hours). I too do this when i am at work. Inventor is a much more affordable software.

KINGJB · 11-29-2009, 12:53 PM

Quote:

Originally Posted by miglia-spyder

Well I actually do it all on my free time at work!

But you could buy them...or get them bootleg from the internet.

I got lucky when i was in college and got all bootleg copies from my profesor.

You could also use some student versions... I think.

This is how I got my copy of pro e

comanchetrip · 11-29-2009, 03:15 PM

this the starting of my front bumper now tacking shape

ItsBlue4 · 11-29-2009, 05:05 PM

The bumpers look great. Im in my third year of engineering and we used soildworks. I got a boot legged copy from my teacher. I keep asking him to help me make that different angles but our schedules never match up. After reading all these im going to hunt him done tomorrow and paly with it. I have started a bunch of bumpers and have got stuck. Looks great. Thanks for the ideas.

rustylaredo · 11-29-2009, 09:43 PM

nice bumper. good to see someone actually building one. wish i had the time and money. On that rear bumper i would suggest that design but i would say bolt the frame pieces to the bumper then slide the whole works in and plate the frame section where your gonna bolt it through. that way you can completely disasemble it if you want/need to. oh and make thouse long angle pieces box tubing to strenghen the "frame rails"

comanchetrip · 11-29-2009, 10:43 PM

well that's what i had in mind but, this need to be air tight and built right. its a air tank to add to my OBAir

Cheap$200Jeep · 11-29-2009, 11:25 PM

Quote:

Originally Posted by fantic238

Ok guys i need some close pics of the swing out tire mounts..

Sorry to jump in late, I have been looking at ideas for fabing up my tire mount. Here in Washington State, we have to have the Liscense plate clearly visable and lit up. All the ideas I have found place the tire dead center or more to the passanger side. Why not have it pivot on the driver's side and stay out of your view as you are looking over your right shoulder? (Less blind spot and less stress on your pivot point)

hdhp · 12-24-2009, 11:23 AM

Cad that is great!! Too much free time @ work?? lol

huntingman2706217 · 01-19-2010, 01:54 PM

i blew off my CAD class... made an A in it though... lol... even was able to download the free "school" version which i deleted after that quarter... which i wish i had now... lol... anyway my rear bumper i built into the frame rail... use 2x4 square tube... slides right in... youll need to cut the shackle bolt with a long sawzall blade.. it sticks out like an inch inside the frame... also dont forget about the fuel tank filler tube... its in the way on the drivers side so you can only go so deep... deep enough though... i used a thick tube and drilled holes where there reciever was for my mounting bolts... just so yall can figure that into your drawings...

11-18-2009, 02:21 AM	#61
fantic238 CF provocator Join Date: Jun 2009 Posts: 3,415 My Photos 1988 limited Cherokee Year: 1988 limited Model: Cherokee Engine: 4.0 litre Transmission: AW4 Transfer Case: np242 Front Axle: dana30 high pinion Rear Axle: dana35 non c-clip limited slip diff Tires: 31x10.50 yokohama super digger Lift Specifications: 3.5 in rough country Misc Accessories: audi A6 electric fans, gibson 3in stainless steel exhaust, tank & tc skid plate, light bar, propane	Cool, what are those holes for? __________________ Memento audere semper "god said rock and then came ledZeppelin" For CAD geeks here: http://www.cherokeeforum.com/f58/how...-bumper-27077/

11-18-2009, 04:52 AM	#62
fantic238 CF provocator Join Date: Jun 2009 Posts: 3,415 My Photos 1988 limited Cherokee Year: 1988 limited Model: Cherokee Engine: 4.0 litre Transmission: AW4 Transfer Case: np242 Front Axle: dana30 high pinion Rear Axle: dana35 non c-clip limited slip diff Tires: 31x10.50 yokohama super digger Lift Specifications: 3.5 in rough country Misc Accessories: audi A6 electric fans, gibson 3in stainless steel exhaust, tank & tc skid plate, light bar, propane	Ok, there are two options for the mounts: the first is with four or six bolts along the side axis of the bumper, but i am not sure of the space i have to operate a wrench. Attached Thumbnails __________________ Memento audere semper "god said rock and then came ledZeppelin" For CAD geeks here: http://www.cherokeeforum.com/f58/how...-bumper-27077/

11-19-2009, 04:47 AM	#64
Jeep85 Seasoned Member Join Date: Sep 2009 Location: 60193 IL Posts: 295 My Photos 1994 Cherokee Year: 1994 Model: Cherokee Engine: 4.0 I6 HO Transmission: aw4 Transfer Case: 231p Front Axle: HP D30 Rear Axle: chrysler 8.25 Lift Specifications: 4 1/2 not on	were can i get this program from looks like the **** __________________ If needed of stock XJ parts I'm the man for you great prices Area 60193 IL Build sheet http://www.cherokeeforum.com/f46/94-xj-2dr-29015/ Now selling neon injectors Chrysler#0280155703 works for 91-98 but need to change from 91-95 parts http://www.cherokeeforum.com/f11/neon-injectors-sale-40261/

11-19-2009, 05:14 AM	#65
sluggy CF Veteran Join Date: Feb 2009 Location: birmingham,england. Posts: 1,306 My Photos 1993 Cherokee Year: 1993 Model: Cherokee Engine: 4.0 ltr Transmission: auto Front Axle: dana 30 Rear Axle: 35 Tires: grabbers 31" Lift Specifications: up about 3" over stock at mo, wanna go higher though. Misc Accessories: loads lol	nice work __________________ real name is john 1995 honda cbr1000fr 1967 chrysler newport 383 2001 triumph tiger 955i

11-19-2009, 08:09 AM	#67
fantic238 CF provocator Join Date: Jun 2009 Posts: 3,415 My Photos 1988 limited Cherokee Year: 1988 limited Model: Cherokee Engine: 4.0 litre Transmission: AW4 Transfer Case: np242 Front Axle: dana30 high pinion Rear Axle: dana35 non c-clip limited slip diff Tires: 31x10.50 yokohama super digger Lift Specifications: 3.5 in rough country Misc Accessories: audi A6 electric fans, gibson 3in stainless steel exhaust, tank & tc skid plate, light bar, propane	Pro/engineer is an expensive software. It works with a floating license (only on internet, and only during work hours). I too do this when i am at work. Inventor is a much more affordable software. __________________ Memento audere semper "god said rock and then came ledZeppelin" For CAD geeks here: http://www.cherokeeforum.com/f58/how...-bumper-27077/

11-29-2009, 03:15 PM	#69
comanchetrip Newbie Join Date: Sep 2009 Location: wilkeson Posts: 13 My Photos 87 Cherokee Year: 87 Model: Cherokee Engine: 4.3 vortec Transmission: auto Transfer Case: 203 Front Axle: dana 30 with v8 axils Rear Axle: 8.8 Tires: 33' Lift Specifications: 4' and my own tuch Misc Accessories: tools,air,lights,radios	this the starting of my front bumper now tacking shape Attached Thumbnails

11-29-2009, 05:05 PM	#70
ItsBlue4 Newbie Join Date: Nov 2009 Posts: 27 My Photos 1997 Cherokee Year: 1997 Model: Cherokee Engine: 4.0L	The bumpers look great. Im in my third year of engineering and we used soildworks. I got a boot legged copy from my teacher. I keep asking him to help me make that different angles but our schedules never match up. After reading all these im going to hunt him done tomorrow and paly with it. I have started a bunch of bumpers and have got stuck. Looks great. Thanks for the ideas.

11-29-2009, 09:43 PM	#71
rustylaredo Junior Member Join Date: Jul 2009 Location: Elk River MN/ University of MN Duluth Posts: 84 My Photos Cherokee Model: Cherokee Misc Accessories: HEAVY rear bumper, cb, and a good driver	nice bumper. good to see someone actually building one. wish i had the time and money. On that rear bumper i would suggest that design but i would say bolt the frame pieces to the bumper then slide the whole works in and plate the frame section where your gonna bolt it through. that way you can completely disasemble it if you want/need to. oh and make thouse long angle pieces box tubing to strenghen the "frame rails" __________________ It may be silly...but aint it fun Im a jack of all trades... and a master of none -#3 The Intimidator http://evanstruckpages.blogspot.com/

11-29-2009, 10:43 PM	#72
comanchetrip Newbie Join Date: Sep 2009 Location: wilkeson Posts: 13 My Photos 87 Cherokee Year: 87 Model: Cherokee Engine: 4.3 vortec Transmission: auto Transfer Case: 203 Front Axle: dana 30 with v8 axils Rear Axle: 8.8 Tires: 33' Lift Specifications: 4' and my own tuch Misc Accessories: tools,air,lights,radios	well that's what i had in mind but, this need to be air tight and built right. its a air tank to add to my OBAir

12-24-2009, 11:23 AM	#74
hdhp Junior Member Join Date: Dec 2009 Location: Michigan Posts: 67 My Photos	Cad that is great!! Too much free time @ work?? lol

01-19-2010, 01:54 PM	#75
huntingman2706217 Frugal Join Date: Mar 2009 Location: Griffin, G.A. Posts: 3,109 My Photos 1989 Cherokee Year: 1989 Model: Cherokee Engine: 4.0 I6 Transmission: Peucrap 5 speed Transfer Case: 231 Front Axle: Dana 30 Rear Axle: Dana 44 Tires: 31x10.50r15 Lift Specifications: None yet Misc Accessories: Removable Doors, 2 door, 96 HO Motor, MIA Roof, Herculined Floors, D30 Cable Conversion, Speaker Bar	i blew off my CAD class... made an A in it though... lol... even was able to download the free "school" version which i deleted after that quarter... which i wish i had now... lol... anyway my rear bumper i built into the frame rail... use 2x4 square tube... slides right in... youll need to cut the shackle bolt with a long sawzall blade.. it sticks out like an inch inside the frame... also dont forget about the fuel tank filler tube... its in the way on the drivers side so you can only go so deep... deep enough though... i used a thick tube and drilled holes where there reciever was for my mounting bolts... just so yall can figure that into your drawings... __________________ "A bad driver is a good driver when bad things happen" thats my quote. You know, you know what I'm talking about? That there is trademarked, not to be used without written permission of Ricky Bobby, Inc. Yep, I'm flyin' through the air, this is not good. My build page... http://www.cherokeeforum.com/f46/project-frugal-34083/ A great experiance... http://www.kaspick.net/toborg_-_ex_312_marine.htm

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
rear tow bumper	cecyt1300	Wanted	3	11-12-2009 11:38 PM
Best Rear Bumper?	Stillwater Outfitters XJ	Cherokee Tech	29	04-05-2009 01:57 PM
Rear Bumper	grizzlypaugh	Cherokee Tech	4	02-19-2009 10:03 AM
Rear Bumper	grizzlypaugh	Cherokee Tech	8	02-18-2009 09:50 AM
rear bumper	muddeprived	Cherokee Tech	10	01-10-2008 04:57 AM