Homebrew Jeep Mods
03-08-2011, 10:32 PM
#917
Newbie
Join Date: Jan 2011
Location: Chicago
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: I6
thanks guys. this helps a lot. I'm gonna try to mount the vacuum ball by the battery. I think I have some room there. as for the horns, I might just keep them where they are in order to avoid problems.
03-09-2011, 07:25 PM
#919
Newbie
Join Date: Jan 2011
Location: Chicago
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: I6
I had a problem when I took off the end caps. I drove into a deep puddle and power steering went out. it came back in a few seconds but it is still concerning. I figured there is a loose connection somewhere, but I wouldn't know where to look. thoughts and help?
03-09-2011, 07:34 PM
#921
CF Veteran
Join Date: Sep 2009
Location: Summerville, Ga
Posts: 6,322
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
Originally Posted by 97xjsport
I had a problem when I took off the end caps. I drove into a deep puddle and power steering went out. it came back in a few seconds but it is still concerning. I figured there is a loose connection somewhere, but I wouldn't know where to look. thoughts and help?
Last edited by xj_maniac_newb; 03-09-2011 at 07:37 PM.
03-09-2011, 07:55 PM
#922
Newbie
Join Date: Jan 2011
Location: Chicago
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: I6
Originally Posted by truckntractorhick
not the thread to post in...... but ur belt prolly just hydroplaned and its fine.
03-10-2011, 02:15 PM
#923
Member
Join Date: Nov 2010
Location: Battle Ground WA
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 HO 6cy
03-14-2011, 02:28 PM
#924
Senior Member
Join Date: Mar 2011
Location: NEPA
Posts: 613
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L HO
Originally Posted by hurley842002
My favorite mod that I've done, is the Power Inverter W/Outlets in the cargo area. I did a write up over on Naxja awhile back, i'll just post picks with a brief summary above them.
Mounted 1,000 Watt Xantrex power inverter, underneath passenger seat.
Plug a standard 3 prong extension cable into one of the outlets and run it under the carpet towards the rear passenger panel in the cargo area
Measure 3 plug outlet to be used
Cut hole in rear passenger cargo area panel
Plug extension cord into the 3 plug outlet, press outlet into the hole (hole was undercut in order to be a snug fit.)
And there ya have it, 3 outlets in the rear cargo area, and still one available under the passenger seat. I'm thinking about doing another outlet in the dash somewhere. I've ran everything from work lights, to grinders, to drills. I also keep a long 3 outlet extension cord under the rear seat for extended range usage.
Mounted 1,000 Watt Xantrex power inverter, underneath passenger seat.
Plug a standard 3 prong extension cable into one of the outlets and run it under the carpet towards the rear passenger panel in the cargo area
Measure 3 plug outlet to be used
Cut hole in rear passenger cargo area panel
Plug extension cord into the 3 plug outlet, press outlet into the hole (hole was undercut in order to be a snug fit.)
And there ya have it, 3 outlets in the rear cargo area, and still one available under the passenger seat. I'm thinking about doing another outlet in the dash somewhere. I've ran everything from work lights, to grinders, to drills. I also keep a long 3 outlet extension cord under the rear seat for extended range usage.
03-14-2011, 03:50 PM
#925
Member
Join Date: Dec 2010
Location: Covina, ca
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: inline 6 4.0 L
these are all amazing mods, especially that outlet in your cargo area i love it!! now i can take my ps3 into the sticks. haha i hope to be dropping a 32 gallon fuel cell in my trunk instead of my stock tank... maybe ill post some pictures of that...
03-15-2011, 09:16 AM
#926
Member
Join Date: Mar 2011
Location: New Jersey
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.O
OK I already have a good set up for the laptop in the XJ, I can use my android phone as a mobile hotspot for 4g speeds where available but am stuck to 3g otherwise.... 3g is great for web surfing but sucks for dloading and other higher bandwidth required functions.... SO I took my computer set up to a new level.....
First I took an old "g" wireless linksys router and had to flash or hack a new firmware into it..... This allows it to "repeat" and internet signal. So instead of broadcasting a signal, the router takes in other wireless signals and repeats them.... So anything you plug into one of those 4 ports in the back will have internet.
Then I mounted it to the stock tire mount hook with small bungees to make it removable.
JustbigLinksys.jpg?t=1300197763
I fired it up, connected to a signal over 100 yards away on another street and was getting 5mb of net speed!
Then I decided to take another old wireless "G" router I had and connect it to one of the ports in the back of the ugly blue router..... Now what this does is take the internet and gives me the ability to turn it into my own wireless signal with a separate IP address.
BothRoutersmounted.jpg?t=1300197961
I have the repeating router set to connect to whatever unsecured signal in the area is strongest, this ensures I am getting the fastest internet possible at any given moment.
The antennas on the repeating router are high gain 11 dbi antennas..... This gives it much better range than the lousy 4 dbi stock antennas that it came with. The second router has its original stock antenna since Im not to concerned with broadcasting a huge signal.
here it is finished...
Finishedroutersetup.jpg?t=1300198417
For those who missed my laptop mount....
clampedfullview.jpg?t=1300198485
2011-03-03094226.jpg?t=1300198523
First I took an old "g" wireless linksys router and had to flash or hack a new firmware into it..... This allows it to "repeat" and internet signal. So instead of broadcasting a signal, the router takes in other wireless signals and repeats them.... So anything you plug into one of those 4 ports in the back will have internet.
Then I mounted it to the stock tire mount hook with small bungees to make it removable.
JustbigLinksys.jpg?t=1300197763
I fired it up, connected to a signal over 100 yards away on another street and was getting 5mb of net speed!
Then I decided to take another old wireless "G" router I had and connect it to one of the ports in the back of the ugly blue router..... Now what this does is take the internet and gives me the ability to turn it into my own wireless signal with a separate IP address.
BothRoutersmounted.jpg?t=1300197961
I have the repeating router set to connect to whatever unsecured signal in the area is strongest, this ensures I am getting the fastest internet possible at any given moment.
The antennas on the repeating router are high gain 11 dbi antennas..... This gives it much better range than the lousy 4 dbi stock antennas that it came with. The second router has its original stock antenna since Im not to concerned with broadcasting a huge signal.
here it is finished...
Finishedroutersetup.jpg?t=1300198417
For those who missed my laptop mount....
clampedfullview.jpg?t=1300198485
2011-03-03094226.jpg?t=1300198523
03-15-2011, 09:26 AM
#927
Seasoned Member
Join Date: May 2009
Location: olive branch, ms
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
not that it really matters, but what line of work are you in that you need that much connectivity to teh interwebz. looks very functional though
03-15-2011, 10:42 AM
#928
Member
Join Date: Mar 2011
Location: New Jersey
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.O
Normally
I am a bridge and roadway inspector, the truth is that I really don't need much internet in the field. All this connectivity is purely for my and my coworkers enjoyment while we sit for hours in our vehicles watching other people work. I can watch dvd's and dowloaded movies too.... Some times I will not be required to get out of my vehicle for up to 4-5 hours at a time.
Everyone else is jealous as hell at my set up when they are sitting on their asses doing nothing. Now anyone who parks near me can share my signal.
03-15-2011, 01:26 PM
#929
CF Veteran
Join Date: Jul 2009
Location: New Jersey (Milltown, Lavallette, and Wayne)
Posts: 2,245
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L I6
OK I already have a good set up for the laptop in the XJ, I can use my android phone as a mobile hotspot for 4g speeds where available but am stuck to 3g otherwise.... 3g is great for web surfing but sucks for dloading and other higher bandwidth required functions.... SO I took my computer set up to a new level.....
First I took an old "g" wireless linksys router and had to flash or hack a new firmware into it..... This allows it to "repeat" and internet signal. So instead of broadcasting a signal, the router takes in other wireless signals and repeats them.... So anything you plug into one of those 4 ports in the back will have internet.
Then I mounted it to the stock tire mount hook with small bungees to make it removable.
I fired it up, connected to a signal over 100 yards away on another street and was getting 5mb of net speed!
Then I decided to take another old wireless "G" router I had and connect it to one of the ports in the back of the ugly blue router..... Now what this does is take the internet and gives me the ability to turn it into my own wireless signal with a separate IP address.
I have the repeating router set to connect to whatever unsecured signal in the area is strongest, this ensures I am getting the fastest internet possible at any given moment.
The antennas on the repeating router are high gain 11 dbi antennas..... This gives it much better range than the lousy 4 dbi stock antennas that it came with. The second router has its original stock antenna since Im not to concerned with broadcasting a huge signal.
here it is finished...
For those who missed my laptop mount....
First I took an old "g" wireless linksys router and had to flash or hack a new firmware into it..... This allows it to "repeat" and internet signal. So instead of broadcasting a signal, the router takes in other wireless signals and repeats them.... So anything you plug into one of those 4 ports in the back will have internet.
Then I mounted it to the stock tire mount hook with small bungees to make it removable.
I fired it up, connected to a signal over 100 yards away on another street and was getting 5mb of net speed!
Then I decided to take another old wireless "G" router I had and connect it to one of the ports in the back of the ugly blue router..... Now what this does is take the internet and gives me the ability to turn it into my own wireless signal with a separate IP address.
I have the repeating router set to connect to whatever unsecured signal in the area is strongest, this ensures I am getting the fastest internet possible at any given moment.
The antennas on the repeating router are high gain 11 dbi antennas..... This gives it much better range than the lousy 4 dbi stock antennas that it came with. The second router has its original stock antenna since Im not to concerned with broadcasting a huge signal.
here it is finished...
For those who missed my laptop mount....
Hahaha you did that fast lol you just mentioned it Sunday and now it's done lol looks great too!!
03-15-2011, 02:18 PM
#930
Member
Join Date: Mar 2011
Location: New Jersey
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.O
Thanks, just think.... Next time us NJers go wheeling we can head right to D and D afterwards, fire up out lap tops and upload all the pics and videos to CF right away (grin).
