anyone make their own hiem joint steering linkage or panhard bar?
#1
Newbie
Thread Starter
Join Date: Aug 2014
Location: Rockville VA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 renix
anyone make their own hiem joint steering linkage or panhard bar?
been thinking about buying some DOM and joints and making my own trackbar/panhard bar. Anyone have any experience with making the brackets to accept the new joints?
#2
CF Veteran
Join Date: Jul 2012
Location: Andover, VT
Posts: 2,970
Received 224 Likes
on
174 Posts
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0 L
"Fabrication is reserved for completed and under going projects, not for questions and general chat about fabrication.
This is NOT the location for questions about what you want to do, they belong in cherokee chat. This is NOT the location for trimming fenders, rattle canning your xj, lift questions, installing new carpet or anything small like this. This is for REAL fab work that you are currently doing or have done and how you did it. AKA, Exocages, Frame stiffeners, Bumpers, DIY beadlocks, etc. This is where the big boys play.
If you do have questions the best option is to search (top right of the website, down and to the left of your username) but we all know that can be an overwhelming tool. That in mind I have compiled a few of the most common things posted here that do not belong, and you may find them useful and informative "
Yes, it's been done before.
This is NOT the location for questions about what you want to do, they belong in cherokee chat. This is NOT the location for trimming fenders, rattle canning your xj, lift questions, installing new carpet or anything small like this. This is for REAL fab work that you are currently doing or have done and how you did it. AKA, Exocages, Frame stiffeners, Bumpers, DIY beadlocks, etc. This is where the big boys play.
If you do have questions the best option is to search (top right of the website, down and to the left of your username) but we all know that can be an overwhelming tool. That in mind I have compiled a few of the most common things posted here that do not belong, and you may find them useful and informative "
Yes, it's been done before.
#3
Seasoned Member
Join Date: Aug 2013
Location: Duluth, MN
Posts: 452
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
"Fabrication is reserved for completed and under going projects, not for questions and general chat about fabrication.
This is NOT the location for questions about what you want to do, they belong in cherokee chat. This is NOT the location for trimming fenders, rattle canning your xj, lift questions, installing new carpet or anything small like this. This is for REAL fab work that you are currently doing or have done and how you did it. AKA, Exocages, Frame stiffeners, Bumpers, DIY beadlocks, etc. This is where the big boys play.
If you do have questions the best option is to search (top right of the website, down and to the left of your username) but we all know that can be an overwhelming tool. That in mind I have compiled a few of the most common things posted here that do not belong, and you may find them useful and informative "
Yes, it's been done before.
This is NOT the location for questions about what you want to do, they belong in cherokee chat. This is NOT the location for trimming fenders, rattle canning your xj, lift questions, installing new carpet or anything small like this. This is for REAL fab work that you are currently doing or have done and how you did it. AKA, Exocages, Frame stiffeners, Bumpers, DIY beadlocks, etc. This is where the big boys play.
If you do have questions the best option is to search (top right of the website, down and to the left of your username) but we all know that can be an overwhelming tool. That in mind I have compiled a few of the most common things posted here that do not belong, and you may find them useful and informative "
Yes, it's been done before.
#4
::CF Administrator::
No, but it clutters the section with posts that shouldn't be there, and makes more work for the mods. Why get down on somebody for informing someone who obviously doesn't know the rules? Just report the thread and move on in the future. I have reported this thread, so no need. Mods, edit as necessary. Thanks.
#5
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,867
Received 1,524 Likes
on
1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Moved to Chat.
#7
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,867
Received 1,524 Likes
on
1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Trending Topics
#9
CF Veteran
Join Date: Feb 2013
Location: Justin, TEXAS
Posts: 1,802
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
Made my own steering and panhard bar too
The time you would have in fabbing the brackets you would be better of buying the ruff stuff brackets for 40$ a peice.
Actually, get everything from them unless you can get a better price on DOM.
Ruff stuff 7/8" heims and their over the axle and frame side brackets are the shiz.
Do some research. Or go to fabrication and scroll down until you find my one ton steering build.
Read through it. It's got alot of good info and towards the end is when I build the panhard bar
The time you would have in fabbing the brackets you would be better of buying the ruff stuff brackets for 40$ a peice.
Actually, get everything from them unless you can get a better price on DOM.
Ruff stuff 7/8" heims and their over the axle and frame side brackets are the shiz.
Do some research. Or go to fabrication and scroll down until you find my one ton steering build.
Read through it. It's got alot of good info and towards the end is when I build the panhard bar
#10
Seasoned Member
Join Date: Apr 2013
Location: Purcellville, Virginia
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
Year: '95
Model: Cherokee
Engine: 4.0 HO
Made my own steering and panhard bar too The time you would have in fabbing the brackets you would be better of buying the ruff stuff brackets for 40$ a peice. Actually, get everything from them unless you can get a better price on DOM. Ruff stuff 7/8" heims and their over the axle and frame side brackets are the shiz. Do some research. Or go to fabrication and scroll down until you find my one ton steering build. Read through it. It's got alot of good info and towards the end is when I build the panhard bar
#12
Newbie
Thread Starter
Join Date: Aug 2014
Location: Rockville VA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 renix
everyone was new at some point xjlimited don't take it offensively. assuming that i don't know what i am doing was pretty harsh considering you have no idea. xj wonders you did a awesome job, did you drill out the factory tapered balljoint hole? and what do you have running through it now?
#13
::CF Administrator::
everyone was new at some point xjlimited don't take it offensively. assuming that i don't know what i am doing was pretty harsh considering you have no idea. xj wonders you did a awesome job, did you drill out the factory tapered balljoint hole? and what do you have running through it now?
https://www.cherokeeforum.com/f58/re...99/#post959428