View Poll Results: June COTM Winner
Jeepster90xj
3
6.82%
Wader218
4
9.09%
XJwonders
7
15.91%
Mcgeex88
2
4.55%
Cholthauss
28
63.64%
Voters: 44. You may not vote on this poll
June COTM Voting Thread!
06-02-2014, 10:36 PM
#1
Member
Thread Starter
Join Date: Mar 2012
Location: washington
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: straight 6 4.0
June COTM Voting Thread!
1990 4.0 Laredo (Owned for roughly 3 years)
Engine:
Re-manufactured 4.0 from a local engine builder with around 10,000 on it now
703 injectors
Cowl intake
Aftermarket Header with custom exhaust and flow master super 40.
Trans and Transfercase:
Stock AW4 trans
Np 242 transfer case with rubicon express hack and tap sye
Custom length front xj drive line for the rear of course
Axles:
HP D30 from unkown year xj (PO did the swap)
29 Spline C8.25 from a 2001 xj
4.88 gears with spartan locker in the rear
Suspension/ Steering:
Rubicon express 5.5" coils up front
Serious Off Road longarms
4.5" Leafs in the rear with Zone 1" boomerang shackles and HD OffRoad shackle relocation boxes
Serious Offroad 1 ton UTK steering
Rubicon express HD double shear track bar with HD Mount
Tires and Wheels:
35" KM2's
Cragar Soft 8's
Weld on beadlocks cut by a local water jet shop
Bumpers/ armor:
Custom front bumper built by me
Rear bumper is a JCR offroad tire carrier bumper
Rock sliders also home built
Miscellaneous Upgrades:
Cb radio
New stereo with up graded speakers and 12" sub
Custom color combination
Doorless mod
Frame stiffeners
Door speaker relocation
Bushwacker fender flares
roof rack from a guy on craigslist
And im sure im forgetting a ton of stuff ive done to it
Future Plans:
Exo cage
Steel fender flares tied into cage
Lock the front axle
Hydro assist steering
Possible OTK steering
Attachment 244696
Attachment 244697
Attachment 244703
Attachment 244704
Engine:
Re-manufactured 4.0 from a local engine builder with around 10,000 on it now
703 injectors
Cowl intake
Aftermarket Header with custom exhaust and flow master super 40.
Trans and Transfercase:
Stock AW4 trans
Np 242 transfer case with rubicon express hack and tap sye
Custom length front xj drive line for the rear of course
Axles:
HP D30 from unkown year xj (PO did the swap)
29 Spline C8.25 from a 2001 xj
4.88 gears with spartan locker in the rear
Suspension/ Steering:
Rubicon express 5.5" coils up front
Serious Off Road longarms
4.5" Leafs in the rear with Zone 1" boomerang shackles and HD OffRoad shackle relocation boxes
Serious Offroad 1 ton UTK steering
Rubicon express HD double shear track bar with HD Mount
Tires and Wheels:
35" KM2's
Cragar Soft 8's
Weld on beadlocks cut by a local water jet shop
Bumpers/ armor:
Custom front bumper built by me
Rear bumper is a JCR offroad tire carrier bumper
Rock sliders also home built
Miscellaneous Upgrades:
Cb radio
New stereo with up graded speakers and 12" sub
Custom color combination
Doorless mod
Frame stiffeners
Door speaker relocation
Bushwacker fender flares
roof rack from a guy on craigslist
And im sure im forgetting a ton of stuff ive done to it
Future Plans:
Exo cage
Steel fender flares tied into cage
Lock the front axle
Hydro assist steering
Possible OTK steering
Attachment 244696
Attachment 244697
Attachment 244703
Attachment 244704
06-03-2014, 01:21 AM
#2
Member
Join Date: Feb 2011
Location: Central Iowa
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L High Output
June COTM Voting Thread!
Wader 218:
1996 Jeep Cherokee Sport
Engine
Stock 4.0 (300,000 miles)
Spectre Inline Air Box Enclosure
Drivetrain
Stock AW4
NP 231 w/ Advance Addapter SYE
HP Dana 30 w/ 4.10 Gears and Lokka, Tubes Welded to the housing
Ford Explorer 8.8 Rear w/ 4.10 Gears, Limited slip, disc brakes tubes welded to the housing, IRO spring mounts
Spicer U Joints
Front Driveshaft in the Rear with spicer crossover joint for the flange adapter and IRO spacer plate
Steering
Ruffstuff 1 Ton using Chevy Tie Rods
2" Drop Pitman Arm
IRO Steering Box Spacer
Suspension
Iron Rock Offroad 6.5" Long Arm w/ 2" Spacer and 1.5" Add a leaf (Sitting at Roughly 8")
IRO bar pin eliminators front and rear
JKS Quick Discos w/ Homebrew Hangers
Rough Country Shackles
Interior
Cobra CB w/ firestick antenna
Cargo Net
Jerry Can Mount
Hi Lift Mount
Wheels/Tires
35x12.50r15 Mickey Thompson Baja MT
Crager Soft 8 15x8 4.0" BS
1.5" Wheel Spacers on the Rear
Bumpers/Armor
Front JCR Bumper w/ Unibody tie in brackets
Rear JCR/Modified Rear Bumper to fill in cut and fold qtrs
JCR Fuel tank skid
Hybrid cage, 2x4 rockers
Solid Diff Cover on Rear
Front diff guard
Misc
KC Lights
Smittybilt 8000 lb Winch w/ Rope Line
Reciever Winch Cradle
Register vent hood vents
48" Hi Lift
Cut and Folded Qtrs
Safari Snorkel
Trimmed Fenders w/ Pocket Style Bushwackers
Extended Brack Lines
Ruffstuff chassis stiffeners
Clear Front Lenses
Break Away Mirrors
Front/Rear Fire Exinguishers
Future Modifications
Possibly 37's, 4.56's/4.88's, Dana 44 Front if 30 poops out, Detroit locker in the rear, new front seats, harnesses, Bed line interior floor, Zebra paint job, Bored throttle body, 99+ intake, new 4 hole injectors
1996 Jeep Cherokee Sport
Engine
Stock 4.0 (300,000 miles)
Spectre Inline Air Box Enclosure
Drivetrain
Stock AW4
NP 231 w/ Advance Addapter SYE
HP Dana 30 w/ 4.10 Gears and Lokka, Tubes Welded to the housing
Ford Explorer 8.8 Rear w/ 4.10 Gears, Limited slip, disc brakes tubes welded to the housing, IRO spring mounts
Spicer U Joints
Front Driveshaft in the Rear with spicer crossover joint for the flange adapter and IRO spacer plate
Steering
Ruffstuff 1 Ton using Chevy Tie Rods
2" Drop Pitman Arm
IRO Steering Box Spacer
Suspension
Iron Rock Offroad 6.5" Long Arm w/ 2" Spacer and 1.5" Add a leaf (Sitting at Roughly 8")
IRO bar pin eliminators front and rear
JKS Quick Discos w/ Homebrew Hangers
Rough Country Shackles
Interior
Cobra CB w/ firestick antenna
Cargo Net
Jerry Can Mount
Hi Lift Mount
Wheels/Tires
35x12.50r15 Mickey Thompson Baja MT
Crager Soft 8 15x8 4.0" BS
1.5" Wheel Spacers on the Rear
Bumpers/Armor
Front JCR Bumper w/ Unibody tie in brackets
Rear JCR/Modified Rear Bumper to fill in cut and fold qtrs
JCR Fuel tank skid
Hybrid cage, 2x4 rockers
Solid Diff Cover on Rear
Front diff guard
Misc
KC Lights
Smittybilt 8000 lb Winch w/ Rope Line
Reciever Winch Cradle
Register vent hood vents
48" Hi Lift
Cut and Folded Qtrs
Safari Snorkel
Trimmed Fenders w/ Pocket Style Bushwackers
Extended Brack Lines
Ruffstuff chassis stiffeners
Clear Front Lenses
Break Away Mirrors
Front/Rear Fire Exinguishers
Future Modifications
Possibly 37's, 4.56's/4.88's, Dana 44 Front if 30 poops out, Detroit locker in the rear, new front seats, harnesses, Bed line interior floor, Zebra paint job, Bored throttle body, 99+ intake, new 4 hole injectors
06-04-2014, 07:47 PM
#3
CF Veteran
Join Date: Jan 2013
Location: west chester, pa
Posts: 19,216
Likes: 0
Received 39 Likes
on
35 Posts
Year: 1999
Engine: 4.0
June COTM Voting Thread!
1999 Jeep XJ Cherokee Black 4DR
POWERTRAIN;
4.0L
30-43LE
NP231J
HP Dana 30
Chrysler 8.25
ENGINE
PowerTech 4.0L
99+ Intake manifold
60MM bored throttle body
784 injectors
2AWG battery cables with 200 amp fuse
E-fan override switch
High Idle switch
Cowl Snorkel
Rotella T-6
Mopar 090 filter
Some parts are painted Daytona Yellow
TRANSMISSION
Aisin-Warner 30-43LE
Transmission cooler
Sunpro transmission temp gauge
Autometer transmission temp sensor Dexron/Mercon III
WIX filter
TRANSFER CASE
Advance Adapters SYE kit
Morse chain
ATF-4
AXLES
High Pinion Dana 30 front axle
3.55 gear ratio
Chrysler 8.25 rear axle
3.55 gear ratio
SUSPENSION/STEERING
RockKrawler 3 link long arms
4.5 Rubicon Express coils
RockKrawler's Bombproof trackbar
Toxic stainless steel brake lines
Teraflex 1.5 shackles
3 inch Rough Country AAL
Rough Country 2.0 shocks
Hockey puck bumpstops
ZJ V8 tie rod
(Working on heim steering with DOM now)
ARMOR
HD Offroad middle and rear frame stiffeners Custom front bumper
Gas tank skid plate
Custom transmission crossmember
(Working on custom rear bumper now)
Custom rock sliders
MISCELLANEOUS
Entire interior LEDs upgrade
Rampage H4 headlights
Smoked turn signals and taillights
20 inch LED light bar
Sitting on 31x10.5x15 Dakota Definity tires and Cragar soft 8's rims
Attachment 244928
Attachment 244929
Attachment 244930
Attachment 244932
POWERTRAIN;
4.0L
30-43LE
NP231J
HP Dana 30
Chrysler 8.25
ENGINE
PowerTech 4.0L
99+ Intake manifold
60MM bored throttle body
784 injectors
2AWG battery cables with 200 amp fuse
E-fan override switch
High Idle switch
Cowl Snorkel
Rotella T-6
Mopar 090 filter
Some parts are painted Daytona Yellow
TRANSMISSION
Aisin-Warner 30-43LE
Transmission cooler
Sunpro transmission temp gauge
Autometer transmission temp sensor Dexron/Mercon III
WIX filter
TRANSFER CASE
Advance Adapters SYE kit
Morse chain
ATF-4
AXLES
High Pinion Dana 30 front axle
3.55 gear ratio
Chrysler 8.25 rear axle
3.55 gear ratio
SUSPENSION/STEERING
RockKrawler 3 link long arms
4.5 Rubicon Express coils
RockKrawler's Bombproof trackbar
Toxic stainless steel brake lines
Teraflex 1.5 shackles
3 inch Rough Country AAL
Rough Country 2.0 shocks
Hockey puck bumpstops
ZJ V8 tie rod
(Working on heim steering with DOM now)
ARMOR
HD Offroad middle and rear frame stiffeners Custom front bumper
Gas tank skid plate
Custom transmission crossmember
(Working on custom rear bumper now)
Custom rock sliders
MISCELLANEOUS
Entire interior LEDs upgrade
Rampage H4 headlights
Smoked turn signals and taillights
20 inch LED light bar
Sitting on 31x10.5x15 Dakota Definity tires and Cragar soft 8's rims
Attachment 244928
Attachment 244929
Attachment 244930
Attachment 244932
06-04-2014, 09:56 PM
#4
Member
Join Date: Aug 2011
Location: jackson,nj
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
June COTM Voting Thread!
Year: 2000
Model: Cherokee classic
Engine: 4.0 straight 6
Trans: Auto
Front axle: Dana 30
Rear axle: Chrysler 8.25
Gear ratio: 3.55
Mods:
SUSPENSION
Rough country 3 inch lift
Jks quicker disconnects
WHEELS AND TIRES
Black Rock D-window rims
Gooodyear Wrangler MTRs with kevlar 33'"
ARMOR AND PROTECTION
AEV oil pan skid
JCR Off-road front bumper- powder coated black
DND off-road rear bumper and tire carrier- powder coated black
Bushwacker flat flares
ACCESSORIES
Flow master 40 series muffler
Yakima roof rack
Cobra CB
4' firestik
Cheap amazon PA system
2 Kc daylighters 100 watt
hard wire electric fan mod
Attachment 244957
Attachment 244958
Attachment 244959
Attachment 244960
Attachment 244961
Model: Cherokee classic
Engine: 4.0 straight 6
Trans: Auto
Front axle: Dana 30
Rear axle: Chrysler 8.25
Gear ratio: 3.55
Mods:
SUSPENSION
Rough country 3 inch lift
Jks quicker disconnects
WHEELS AND TIRES
Black Rock D-window rims
Gooodyear Wrangler MTRs with kevlar 33'"
ARMOR AND PROTECTION
AEV oil pan skid
JCR Off-road front bumper- powder coated black
DND off-road rear bumper and tire carrier- powder coated black
Bushwacker flat flares
ACCESSORIES
Flow master 40 series muffler
Yakima roof rack
Cobra CB
4' firestik
Cheap amazon PA system
2 Kc daylighters 100 watt
hard wire electric fan mod
Attachment 244957
Attachment 244958
Attachment 244959
Attachment 244960
Attachment 244961
06-04-2014, 10:51 PM
#5
CF Veteran
Join Date: May 2013
Location: Toe Peek Ugh
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 ho
June COTM Voting Thread!
Corey
good luck to the rest of the fellas
Hired gun off road for life!
Specs
1993 jeep cherokee
Motor 4.0
K&n air filter
Tcase 231 slip yoke
Front axle 79 Hp dana 60
Rear axle 14BFF
Wheelbase 107.5''
39.5 iroks
Mods
Custom 3 link front stretched 3''
Ford f150 leaf spring in the rear stretched 3" Stubby front bumper with integrated Warn VR8000 winch tied into the cage
RPM drive flanges
Spool in the front 4.88 Nitro gears
Detroit locker and yukon 4.88sin the rear
High steer
Hydro assist
Mrw beadlocks
Barns Pinion Guard
Alot of window stickers!
Full Exo cage tied in on the inside and all (por-15)
Rock sliders
Rear 2x4 bumper tied into the cage
Crow 4 point harnesses
Competition cut rear fenders and tubed (soon to stretch)
Wired in a in cab winch remote
Fuel Cell
Nitrogen tank
Future mods
Beadliner Floor
Flip leaf springs
Install traction bar
Racing seats
231/300 or atlas 3.8 idk yet
good luck to the rest of the fellas
Hired gun off road for life!
Specs
1993 jeep cherokee
Motor 4.0
K&n air filter
Tcase 231 slip yoke
Front axle 79 Hp dana 60
Rear axle 14BFF
Wheelbase 107.5''
39.5 iroks
Mods
Custom 3 link front stretched 3''
Ford f150 leaf spring in the rear stretched 3" Stubby front bumper with integrated Warn VR8000 winch tied into the cage
RPM drive flanges
Spool in the front 4.88 Nitro gears
Detroit locker and yukon 4.88sin the rear
High steer
Hydro assist
Mrw beadlocks
Barns Pinion Guard
Alot of window stickers!
Full Exo cage tied in on the inside and all (por-15)
Rock sliders
Rear 2x4 bumper tied into the cage
Crow 4 point harnesses
Competition cut rear fenders and tubed (soon to stretch)
Wired in a in cab winch remote
Fuel Cell
Nitrogen tank
Future mods
Beadliner Floor
Flip leaf springs
Install traction bar
Racing seats
231/300 or atlas 3.8 idk yet
06-20-2014, 07:56 AM
#6
Junior Member
June COTM Voting Thread!
Guys, please remember that when this is over I will REQUIRE that high resolution/good quality photos be sent to me to go in the Calendar. Please be prepared to do so. If not, the runner up's entry will be used instead.
K, Go.
K, Go.
