Scrambler Frame Up build,
#50
CF Veteran
Thread Starter
Join Date: Mar 2010
Location: Jacksonville, FL
Posts: 6,685
Likes: 0
Received 5 Likes
on
5 Posts
Year: 92
Model: Cherokee
Engine: 4.0
and some more pictures.
i finished mounting all of the tires today.
and tossed them on to get a idea of how it will look, actual ride height will be about an 1- 1.5" lower.
i finished mounting all of the tires today.
and tossed them on to get a idea of how it will look, actual ride height will be about an 1- 1.5" lower.
#51
CF Veteran
Thread Starter
Join Date: Mar 2010
Location: Jacksonville, FL
Posts: 6,685
Likes: 0
Received 5 Likes
on
5 Posts
Year: 92
Model: Cherokee
Engine: 4.0
and i started on the rear framing for the fenders, and to brace up the back half of the CJ some.
1/4" angle.
still have ALOT more to do for the rear fenders, but this is a start
1/4" angle.
still have ALOT more to do for the rear fenders, but this is a start
#56
CF Veteran
Thread Starter
Join Date: Mar 2010
Location: Jacksonville, FL
Posts: 6,685
Likes: 0
Received 5 Likes
on
5 Posts
Year: 92
Model: Cherokee
Engine: 4.0
Originally Posted by EastBeast
How's this coming along?
Last edited by N20jeep; 01-08-2012 at 06:25 PM.
#58
CF Veteran
Thread Starter
Join Date: Mar 2010
Location: Jacksonville, FL
Posts: 6,685
Likes: 0
Received 5 Likes
on
5 Posts
Year: 92
Model: Cherokee
Engine: 4.0
replaced the input shaft in the Dana300 so it will work with the chevy transmission.
and i also begun building the crossmember/skid plate....which is going to be BEEFY
and i also begun building the crossmember/skid plate....which is going to be BEEFY
#60
CF Veteran
Thread Starter
Join Date: Mar 2010
Location: Jacksonville, FL
Posts: 6,685
Likes: 0
Received 5 Likes
on
5 Posts
Year: 92
Model: Cherokee
Engine: 4.0
so we had a little delay with finding the right flexplate. so the build was put on hold till we got that taken care of.
so now for some updates.
i build the crossmember and transmission mount for the CJ
and the frame bosses that were welded into the frame for mounting the crossmember
the crossmember is built out of all 1/4" steel, and will be plated on all sides with 1/4" steel or aluminum that will be removable.
so now for some updates.
i build the crossmember and transmission mount for the CJ
and the frame bosses that were welded into the frame for mounting the crossmember
the crossmember is built out of all 1/4" steel, and will be plated on all sides with 1/4" steel or aluminum that will be removable.
Last edited by N20jeep; 03-29-2012 at 06:41 PM.