Jeep Compass
#1
Newbie
Thread Starter
Join Date: Jun 2010
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Jeep Compass
I Have a 2007 jeep compass, i am driving the car and all of the sudden in the dash board the light of 4WD! came on the dashboard. What does this means and how can i fix it without taking to the dealer is to expensive need help thank you
you can write me at calvos55@hotmail.com
you can write me at calvos55@hotmail.com
#5
CF Veteran
Don't those have a pretty drawn out powertrain warranty? It might still be covered. In all honesty though, I don't know anything about those...
#7
Seasoned Member
Join Date: Mar 2009
Location: Ohio
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 L
There should be a little switch between the seats you have to pull up on it to lock into 4wd just pull it up one more time and it should come out of 4wd just my 2cents
Trending Topics
#8
Junior Member
Join Date: Feb 2010
Location: Louisiana
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
From an '09 Patriot manual but should still apply.
31. 4WD! Warning Light
This light monitors the 4-Wheel Drive (4WD)
system. The light will come on, for a bulb
check, when the ignition key is turned to the
ON position and may stay on for as long as
three seconds.
system. The light will come on, for a bulb
check, when the ignition key is turned to the
ON position and may stay on for as long as
three seconds.
When lit solid:
There is an 4WD system fault. 4WD
performance will be at a reduced level. Service the 4WD
system soon.
performance will be at a reduced level. Service the 4WD
system soon.
When blinking:
The 4WD system is temporarily disabled
due to overload condition.
due to overload condition.
Thread
Thread Starter
Forum
Replies
Last Post
StPTrucker
Introductions
30
11-22-2015 05:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)