6.2 diesel no compression #7
07-18-2014, 04:45 PM
#1
MJ>XJ
Thread Starter
Join Date: Mar 2009
Location: Griffin, G.A.
Posts: 17,836
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1990
Model: Comanche
Engine: 4.0 I6
6.2 diesel no compression #7
So my tow rig I'm restoring had zero compression on #7 piston... it just turned 100k 2 weeks ago... It had a hard start issues with the previous owner and he told me he used ether... which on these old diesels is a no no and everyone knows it because of the big *** sticker saying don't do it!!
Generally it's rings correct?? Could I just pull it... flip it... and replace the rings and go with that?? It's hardly broke in so I'd hate to rebuild the whole dang thing... well given that half my piston isn't melted away...
Generally it's rings correct?? Could I just pull it... flip it... and replace the rings and go with that?? It's hardly broke in so I'd hate to rebuild the whole dang thing... well given that half my piston isn't melted away...
08-23-2014, 08:17 PM
#2
Herp Derp Jerp
Join Date: Nov 2011
Location: Parham, ON
Posts: 18,251
Likes: 0
Received 12 Likes
on
11 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
I know this is an old thread but DAMN that sucks dude. What would possess someone to shoot ether into a glow plug engine is beyond me.
You get that figured out? Yeah it could be rings. That crap can potentially bend a rod.
You get that figured out? Yeah it could be rings. That crap can potentially bend a rod.
08-25-2014, 04:01 PM
#3
CF Veteran
Join Date: Feb 2012
Location: central IN
Posts: 2,282
Likes: 0
Received 15 Likes
on
11 Posts
Year: 1997
Engine: 4.0
I worked for a guy that had this exact same issue. something to the effect of the glow plug breaking off and breaking the piston. we ended up having to source a head, piston, rings, and bearing for that cyl. but it made A LOT of racket before it finally gave up.
08-28-2014, 11:32 AM
#4
MJ>XJ
Thread Starter
Join Date: Mar 2009
Location: Griffin, G.A.
Posts: 17,836
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1990
Model: Comanche
Engine: 4.0 I6
Dang i missed salads reply some how... lol
I guess a update to this would be some things didn't add up so i bought a compression tester and it tested out just fine... I also did a test on the bottom end I read about... clear hose on the oil dipstick... run it into a bottle of water bout half way... water line stays even inside tube... Rev motor to 2k and if the motors good it'll create a vacuum and pull water roughly 2in above the water line... if a pistons blown or anything like that I believe it just does the opposite... anyways that tested great as well... I gotta order injecters now... ouch.... not as ouch as a motor though!!
I guess a update to this would be some things didn't add up so i bought a compression tester and it tested out just fine... I also did a test on the bottom end I read about... clear hose on the oil dipstick... run it into a bottle of water bout half way... water line stays even inside tube... Rev motor to 2k and if the motors good it'll create a vacuum and pull water roughly 2in above the water line... if a pistons blown or anything like that I believe it just does the opposite... anyways that tested great as well... I gotta order injecters now... ouch.... not as ouch as a motor though!!
Trending Topics
09-09-2014, 06:24 AM
#9
Banned
Join Date: Aug 2014
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
whats the lowest compression heard of running in a 6.2. not worried about cold starts or street-ability. advanced timing, hot temp engine. run ***** out for 20 or 30 minutes tops? planning on an n/a engine also.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
verissimo_n
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-22-2015 10:33 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)