1996 Ford Explorer. Speedometer Gear
#1
Junior Member
Thread Starter
Join Date: Mar 2009
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Year: 96
Model: Cherokee
Engine: 4 liter
1996 Ford Explorer. Speedometer Gear
I was helping a buddy replace the speedometer gear inside the tcase in his 1996 ford explorer today.
We were going to replace both the VSS (Vehicle Speed Sensor), the gear attached to it, and the gear that's inside the tcase.
We took off the rear driveshaft, and the yoke that the driveshaft attaches to, thinking that we could just slide the gear out... We were wrong. It seems like there is a seal there and maybe some sort of metal ring behind it that we cannot seem to get out of the way.
Can we even remove the gear from the back of the tcase? or do we have to take the case apart...?
We were going to replace both the VSS (Vehicle Speed Sensor), the gear attached to it, and the gear that's inside the tcase.
We took off the rear driveshaft, and the yoke that the driveshaft attaches to, thinking that we could just slide the gear out... We were wrong. It seems like there is a seal there and maybe some sort of metal ring behind it that we cannot seem to get out of the way.
Can we even remove the gear from the back of the tcase? or do we have to take the case apart...?
Thread
Thread Starter
Forum
Replies
Last Post
ROCKRIDGE 4WD
Vendor Showcase
13
11-05-2019 10:58 AM
RWKHausSupply
Vendor Showcase
1
10-22-2015 01:11 PM
wcw4496
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-17-2015 06:27 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)