wizardpc

https://www.shapeways.com/shops/gctent

It took 7 prototypes and about 30 hours over several months to get the design right. It can't be reliably printed on hobbyist grade printers--the materials just aren't up to the stress. Ask me how I know.

JeepCherokeeSport00

Thanks for the link. I wouldn't expect any less. I am a designer myself

JeepJeepin

That's a lot of $$ for a bezel

Photojared

God XJ people are ****ing cheap.

You pay for quality. That piece probably had tons of hours of development. It's ****ing awesome.

kgm

bahahaha

Mr. Pink

so true

thatXJguy

I like those 3D Printed options. Of course, if you're not ready to pay $80 for a piece of plastic, you could just make your own .

I opted to buy my own police XJ one immediately after I made this, but the home made one worked great while I used it before I sold it.

CobraMarty

These 3D are way cool. Will buy soon!

USN_JeepXJ

Worth it! I love my wizardpc bezel.



I also re-purposed my original 3 switch bezel:





A little plastic weld, some careful cuts, and some body filler:

SatiricalHen

what are all of those switches for? Also, what's in the radio slot? Btw nice job on the ash tray switch plate.

USN_JeepXJ

Thanks! The switches are for: Factory defrost / rear wiper / fog lights / backup lights (Euro model rear fog switch) / spare (it'll be for the winch isolator eventually) / rock lights. The ash tray switches are: Bumper driving lights / front locker (TJ/LJ locker switch cover modified to work in a fog light switch housing) / rear locker.

The stereo is a factory WJ RB1 navigation unit with a modified XJ bezel.

kev4dez

Another 3D printed version that I did.

Kevin

wizardpc

what switches are those?

kev4dez

wizard,

They come from OTRATTW. They are their Contura V series.

Kevin

wizardpc

Did you have to cut the dash to fit it over the switches?

I made one that used these contura Vs and the switch is taller than the hole in the dash, so I wound up with this situation:



I couldn't put the dash back on with the switches installed.