zj trak bars
#1
Senior Member
Thread Starter
Join Date: Oct 2011
Location: Cape May, NJ
Posts: 729
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Grand Cherokee
Engine: 4.0
zj trak bars
looking to see if anyone has built a set of trak bars for their zj. im sitting at 5.5/6 in of lift and on stock trak bars right at this moment..... long story how i got to this point but yes trak bars and shocks are my main concern (already sitting on adjustable arms) and trying to see if anyone has built their own bars.... thinking about tackling it
#3
Member
Join Date: Aug 2013
Location: Stockton CA
Posts: 236
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: I6
I searched the same thing for a couple week man looking for my ZJ sitting at 5.5/6.0.. The few people I found and talked to, it was still pricey how they did it. Extra 70 bucks and had IRO's adjustable shipped to the door instead. Good luck though and I would be interested to see what you come up with if you do build them.
#4
Senior Member
Thread Starter
Join Date: Oct 2011
Location: Cape May, NJ
Posts: 729
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Grand Cherokee
Engine: 4.0
what im thinking of doing.... is cutting my bar right in the middle and centering my axle.... attach both ends to their mounts and measuring the difference and from there welding in a piece of rolled steel.....
Thoughts?
Thoughts?
#6
Senior Member
Thread Starter
Join Date: Oct 2011
Location: Cape May, NJ
Posts: 729
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Grand Cherokee
Engine: 4.0
can you spot me 260$ for new adjustable trak bars? lol im just looking for something to help buy me a little more time and help with the drivability of the jeep. im not worried about the weld breaking, ive been welding for quite sometime that im confident with the welds
Thread
Thread Starter
Forum
Replies
Last Post
studmuffin
Cherokee Chat
8
10-05-2015 01:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)