Starting issue - Starter Replacement Location
11-23-2009, 11:57 PM
#1
Newbie
Thread Starter
Join Date: Oct 2009
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Starting issue - Starter Replacement Location
Hello - My 06 Cherokee (5.7l hemi) is having problems starting...just one click when you turn the ignition. I tested the battery (pass), starter relay (pass) and now I want to remove and test the starter.
Does anyone have a schematic/diagram of the undercarriage? I removed the skid plate, but I am having trouble locating the starter to remove it.
Thanks again!
Does anyone have a schematic/diagram of the undercarriage? I removed the skid plate, but I am having trouble locating the starter to remove it.
Thanks again!
11-24-2009, 05:35 PM
#2
Seasoned Member
Join Date: Sep 2009
Location: East Texas
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Grand Cherokee
Engine: 4.0
Just follow the red battery cable. It will lead you to it. The cable connnects to the starter terminal. You can try jumping from this terminal to a small terminal that is on the solenoid. If the starter is good, the starter will engage and turn the engine. Use caution doing this.
On a 4.0 engine it is on the passenger side. Lower rear of engine by bell housing.
Here is a picture of a starter. Jump the terminals with the orange lines to see if it will crank the engine.
On a 4.0 engine it is on the passenger side. Lower rear of engine by bell housing.
Here is a picture of a starter. Jump the terminals with the orange lines to see if it will crank the engine.
Thread
Thread Starter
Forum
Replies
Last Post
seansr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
11-15-2022 06:08 AM
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
Hollerhunteradkins
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-26-2015 08:27 AM
Zerocyde
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-24-2015 10:56 AM
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
