motor lift bracket
#1
Junior Member
Thread Starter
Join Date: Jul 2015
Location: Western NC
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000 & 1997
Model: Grand Cherokee
Engine: 4.0
motor lift bracket
Has anyone made a motor lift bracket for the 4.0? I don't want to scrape a new paint job up!
#2
Old fart with a wrench
Okay, the places most guys use are the oil dipstick bolt or starter bolt on the passenger's side, and a power steering bracket bolt on the other side. If you use a chain, put a bolt thru both sides of the chain just below the lift hook so it doesn't slide on you when you lift it. Some guys say they like to use the stud threaded part of the head bolts.
About the coolest lift tool I've ever seen was just a 1/2 X 3" steel bar about 3 ft long, perforated with 1/2" holes about every 3" with shackles and chains that you could put anywhere along it.
About the coolest lift tool I've ever seen was just a 1/2 X 3" steel bar about 3 ft long, perforated with 1/2" holes about every 3" with shackles and chains that you could put anywhere along it.
Last edited by dave1123; 09-02-2015 at 10:27 AM.
Thread
Thread Starter
Forum
Replies
Last Post
96Co
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
01-10-2024 06:17 AM
southfloridajeeps
Modified XJ Cherokee Tech
32
03-04-2023 01:10 PM
Jicki Rough
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 09:36 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)