nukinfuts29

I had no interest in the info centre to begin with. Now i have a ton of rocker switches in a nice convenient spot.

ajk2005

I'm in need of a place to put some switches... But the info center is pretty nice. What would be a good alternative spot to put about 5 togle/rocker switches?

Greybush

on my jeep i found two places that seem to work out pretty good. one of them i right above to e-brake straight with the cup holders, you have a lot of room for switches as well as room in the compartment to run wires under the center console up to the dash and were ever you need them. i ran three of my PIAA light switches there and its very convenient. another spot i found but limits you to space is on the roof console directly across from the buttons for the miles per gallon/outside temp display the really only thing i found convenient about this spot is if you have roof lights its less wiring you have to do

nukinfuts29

You could easily incorporate some into the overhead somewhere, into the dash, center console, etc etc. Be creative

JeepCrazy13

I just bought a Pioneer aftermarket stereo and I have the specified dash kit and wiring harness and I hooked up the harness and I get everything on the display part but yet no sound. Can anyone help with the wiring pattern to which it should be hooked up and what wire is the amp wire behind the dash?

JOSHSTAR54

This is the answer to your no sound issue.