FRONT sway (anti-roll) bar link
#1
Newbie
Thread Starter
Join Date: Sep 2008
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Grand Cherokee
Engine: 4.0 Limited
FRONT sway (anti-roll) bar link
FRONT sway (anti-roll) bar link
hi all
need to find where to get these for my jeep all help will be appreciated
Adam
Jeep CHEROKEE Grand Cherokee year 2000 , 4.0 , limited edition
PS: is there bushes that i can buy and replace them instead of getting the complete arms, and has anyone a tip on how to remove the old bushes and put the new ones in ... thanks all
Last edited by adam01; 10-01-2008 at 07:02 AM.
#2
Renix Super Guru
Join Date: Mar 2008
Location: In yourz postez fissin jurr spelinzs
Posts: 24,653
Likes: 0
Received 16 Likes
on
12 Posts
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
We have a vendor Gerroffroad.com and he has replacement parts. You might send him an e-mail. He gives us great prices too!
#3
Newbie
Thread Starter
Join Date: Sep 2008
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Grand Cherokee
Engine: 4.0 Limited
the reason i need new bushes is this ------> Clunking/Knocking from front end suspension
--------------------------------------------------------------------------------
My front end suspension on my passenger side there's a knock/clunk noise when go over bumps. I went under there and moved everything around to see if anything was loose but couldn't seem to figure it out, any help guys would be great thanks
Adam
--------------------------------------------------------------------------------
My front end suspension on my passenger side there's a knock/clunk noise when go over bumps. I went under there and moved everything around to see if anything was loose but couldn't seem to figure it out, any help guys would be great thanks
Adam
#7
CF Veteran
Join Date: Jan 2008
Location: Puerto Rico
Posts: 1,504
Likes: 0
Received 0 Likes
on
0 Posts
if you want to take out the bushings well you could use a C clamp and put one side on the middle of the bushing and the other on the border of the metal so that it pushes the bushin out...
Trending Topics
#9
Senior Member
Join Date: Mar 2008
Location: British Columbia, Canada
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Grand Cherokee
Engine: 4.7L V8
That's what I did! Well...all I did, but a great mod, for sure! Anyway, you can press your bushings out, or if you don't have a press or clamp, find a socket or a big drift and beat them out with a hammer...if you get urethane bushings to replace them, be sure to lube 'em up before you install them or they'll squeak like a *****...
#10
CF Veteran
Join Date: Oct 2007
Location: W-PA
Posts: 3,883
Likes: 0
Received 6 Likes
on
4 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
I highly recommend these if you do not disconnect for off road:
http://www.tellico4x4.com/product_in...ducts_id/23313
They come with poly bushings that are easily replaced if ever worn.
Heck you can just use the links and save the brackets.
edit: oops, grand cherokee. My bad. At least the links still work with it
http://www.tellico4x4.com/product_in...ducts_id/23313
They come with poly bushings that are easily replaced if ever worn.
Heck you can just use the links and save the brackets.
edit: oops, grand cherokee. My bad. At least the links still work with it
#11
Newbie
Thread Starter
Join Date: Sep 2008
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Grand Cherokee
Engine: 4.0 Limited
I highly recommend these if you do not disconnect for off road:
http://www.tellico4x4.com/product_in...ducts_id/23313
They come with poly bushings that are easily replaced if ever worn.
Heck you can just use the links and save the brackets.
edit: oops, grand cherokee. My bad. At least the links still work with it
http://www.tellico4x4.com/product_in...ducts_id/23313
They come with poly bushings that are easily replaced if ever worn.
Heck you can just use the links and save the brackets.
edit: oops, grand cherokee. My bad. At least the links still work with it
will these fit , i don't do any off road driving and how can i get them payment etc
Adam
#12
Renix Super Guru
Join Date: Mar 2008
Location: In yourz postez fissin jurr spelinzs
Posts: 24,653
Likes: 0
Received 16 Likes
on
12 Posts
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
They have a toll free number, call them and get the dementions of the links. You will then be able to compare them with your stock links.
You can pay by credit card or via PayPal. They accept both.
They are good ppl to deal with.
You can pay by credit card or via PayPal. They accept both.
They are good ppl to deal with.
#13
CF Veteran
Join Date: Oct 2007
Location: W-PA
Posts: 3,883
Likes: 0
Received 6 Likes
on
4 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Adam01, are those links in your picture from your jeep or just an example? if they are an example, do they look the same? How long are they from center of eye to center of eye?
#14
Newbie
Thread Starter
Join Date: Sep 2008
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Grand Cherokee
Engine: 4.0 Limited
i will get them off my jeep and take a picture they are standard links that were on jeep from day one
Adam
Thread
Thread Starter
Forum
Replies
Last Post
Buzball
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-02-2015 05:28 PM
Mmll52
Modified XJ Cherokee Tech
6
09-02-2015 10:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)