Can I run'em
#1
Member
Thread Starter
Join Date: Jul 2011
Location: Lenoir city ,TN
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Can I run'em
My friend has some 33 12x5 that he is wanting to sell me for a good deal.I have a 94 zj that I'm doing the Front to Rear coil swap.I'm using Rubicon Express 3.5 coils in front.can I run these tires with my lift and a fender /bumper trim
#3
Junior Member
Join Date: Jun 2012
Location: Somewhere, NC
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Grand Cherokee
Engine: 4.0L
You can run them with a trim. I got a friend at was running 33s with just a 2" budget lift on his 95 zj. It all depends on how much you are willing to trim/cut. He cut a lot but, he did a good job on it and it looked really good. The boy he sold it to loves it and has been driving it that way for 5 years now. Be sure to post some pics of it before and after.
#4
CF Veteran
Join Date: Feb 2010
Location: Oroville, CA
Posts: 12,367
Likes: 0
Received 19 Likes
on
18 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Trimming the front won't be much of a problem, it's the rear that you have to be careful with. Bad things can happen fast with a sawzall and no plan.
#6
Old fart with a wrench
JMHO, 33s okay, but 12.5s? Awfully big. I had them on my Chevy truck and they were huge! They even rubbed the liners up front at full lock.
Thread
Thread Starter
Forum
Replies
Last Post
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
10-09-2015 10:29 PM
riderjay253
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-16-2015 11:31 AM
WomanNeedsJeepExpertise
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
21
09-10-2015 06:01 PM
Silentj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-06-2015 08:46 PM
Cherokee_Mike
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-05-2015 09:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)