Brake anti-rattle clips?

V.R · 11-10-2009, 04:01 AM

Hello!
Sorry for maybe for a noob question, but how and where to install brake caliper anti-rattle clips in 96 Grand Cherokee? Never replaced them before... They rattle loud and friend recommended me to change them first. Pics are welcome

fantic238 · 11-10-2009, 04:14 AM

Raise the jeep on jackstands, remove wheels, unbolt the two bolts that hold the brake caliper on the caliper mount (those two long bolts that are sinked in the rubber caps behind the caliper), remove caliper and pads, the anti-rattle clips fall right off, replace them in the exact position the old were, put everything back together.

V.R · 11-10-2009, 04:29 AM

thanks for reply! I tried it this before, problem is that there is no clips, i guess service man forgot about them when last time pad were changed (i know that its better to change pads yourself but they had some kind bonus share and they changed them for free, hard to resist) So, I understand that clips should look like this one (http://www.streetbeatcustoms.com/pro...4502410576.jpg) and it must be installed on "shoe tabs"? - http://img5.imageshack.us/img5/3175/...0122458001.png

Is this correct?

fantic238 · 11-10-2009, 05:09 AM

Ah, ok.
You want to know how they go.
They go on the upper part of the caliper mount, with the open ends that are in the middle pointing towards the front of the jeep and the edges pushing on the pads like a spring.

V.R · 11-10-2009, 05:17 AM

thanks for help, i will try it

primy · 11-11-2009, 09:07 AM

Hey i would suggest you to search it in the net there are many sites which can help you.

11-10-2009, 04:01 AM	#1
V.R Newbie Join Date: Apr 2009 Location: Moldova Posts: 24 My Photos 1996 Grand Cherokee Year: 1996 Model: Grand Cherokee Engine: 5.2 V8 Transmission: 44RE Transfer Case: 249 Front Axle: DANA 30 Rear Axle: DANA 44 Tires: Continental ContiCrossContact LX 235/70/r16 for summer and Continental Ice Contact 4X4 for winter Lift Specifications: stock Misc Accessories: rancho rs9000xl, K&N cold intake	Brake anti-rattle clips? Hello! Sorry for maybe for a noob question, but how and where to install brake caliper anti-rattle clips in 96 Grand Cherokee? Never replaced them before... They rattle loud and friend recommended me to change them first. Pics are welcome

11-10-2009, 04:14 AM	#2
fantic238 CF provocator Join Date: Jun 2009 Posts: 3,444 My Photos 1988 limited Cherokee Year: 1988 limited Model: Cherokee Engine: 4.0 litre Transmission: AW4 Transfer Case: np242 Front Axle: dana30 high pinion Rear Axle: dana35 non c-clip limited slip diff Tires: 31x10.50 yokohama super digger Lift Specifications: 3.5 in rough country Misc Accessories: audi A6 electric fans, gibson 3in stainless steel exhaust, tank & tc skid plate, light bar, propane	Raise the jeep on jackstands, remove wheels, unbolt the two bolts that hold the brake caliper on the caliper mount (those two long bolts that are sinked in the rubber caps behind the caliper), remove caliper and pads, the anti-rattle clips fall right off, replace them in the exact position the old were, put everything back together. __________________ Memento audere semper "god said rock and then came ledZeppelin" For CAD geeks here: http://www.cherokeeforum.com/f58/how...-bumper-27077/

11-10-2009, 04:29 AM	#3
V.R Newbie Join Date: Apr 2009 Location: Moldova Posts: 24 My Photos 1996 Grand Cherokee Year: 1996 Model: Grand Cherokee Engine: 5.2 V8 Transmission: 44RE Transfer Case: 249 Front Axle: DANA 30 Rear Axle: DANA 44 Tires: Continental ContiCrossContact LX 235/70/r16 for summer and Continental Ice Contact 4X4 for winter Lift Specifications: stock Misc Accessories: rancho rs9000xl, K&N cold intake	thanks for reply! I tried it this before, problem is that there is no clips, i guess service man forgot about them when last time pad were changed (i know that its better to change pads yourself but they had some kind bonus share and they changed them for free, hard to resist) So, I understand that clips should look like this one (http://www.streetbeatcustoms.com/pro...4502410576.jpg) and it must be installed on "shoe tabs"? - http://img5.imageshack.us/img5/3175/...0122458001.png Is this correct? Last edited by V.R; 11-10-2009 at 04:33 AM..

11-10-2009, 05:09 AM	#4
fantic238 CF provocator Join Date: Jun 2009 Posts: 3,444 My Photos 1988 limited Cherokee Year: 1988 limited Model: Cherokee Engine: 4.0 litre Transmission: AW4 Transfer Case: np242 Front Axle: dana30 high pinion Rear Axle: dana35 non c-clip limited slip diff Tires: 31x10.50 yokohama super digger Lift Specifications: 3.5 in rough country Misc Accessories: audi A6 electric fans, gibson 3in stainless steel exhaust, tank & tc skid plate, light bar, propane	Ah, ok. You want to know how they go. They go on the upper part of the caliper mount, with the open ends that are in the middle pointing towards the front of the jeep and the edges pushing on the pads like a spring. __________________ Memento audere semper "god said rock and then came ledZeppelin" For CAD geeks here: http://www.cherokeeforum.com/f58/how...-bumper-27077/ Last edited by fantic238; 11-12-2009 at 06:01 AM.. Reason: Grammar

11-11-2009, 09:07 AM	#6
primy Newbie Join Date: Nov 2009 Posts: 5 My Photos	Hey i would suggest you to search it in the net there are many sites which can help you. __________________ Primy Jeep Performance Chip

11-10-2009, 05:17 AM	#5
V.R Newbie Join Date: Apr 2009 Location: Moldova Posts: 24 My Photos 1996 Grand Cherokee Year: 1996 Model: Grand Cherokee Engine: 5.2 V8 Transmission: 44RE Transfer Case: 249 Front Axle: DANA 30 Rear Axle: DANA 44 Tires: Continental ContiCrossContact LX 235/70/r16 for summer and Continental Ice Contact 4X4 for winter Lift Specifications: stock Misc Accessories: rancho rs9000xl, K&N cold intake	thanks for help, i will try it

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clips?	Wrecked	Cherokee Tech	6	10-08-2009 03:05 AM
fender brackets/clips	jeepman123	Wanted	1	10-02-2009 11:42 PM
Need help to find retaining clips	jeepcsport	Cherokee Tech	5	07-16-2009 10:24 AM
anti rattle clips how do they go on	miltontl	Cherokee Tech	0	07-15-2009 05:39 PM
Movie clips	BLKXJ 96	Off-Topic Discussion	27	05-30-2008 08:36 AM