Air Door Actuator and blend door location on a 95 GC Limited
10-07-2009, 10:46 AM
#1
Newbie
Thread Starter
Join Date: Sep 2009
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995 GC Limited
Model: Cherokee
Engine: 5.2 liter
Air Door Actuator and blend door location on a 95 GC Limited
I have no heat. After some research, I believe I have a problem with the air door actuator and/or the blend door. Can they be accessed w/o removing the dash?
10-07-2009, 03:50 PM
#2
Newbie
Join Date: Sep 2009
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2002
Model: Grand Cherokee
I'm certainly no expert on these things, but I don't believe they can be. I am currently dealing with the same problem on my 2002 Grand Cherokee.
Check out my post titled "Heater problem" and the responses, especially the links provided by Ol' Blue. I tried to post the link, but was unsuccessful.
Hope this helps
Check out my post titled "Heater problem" and the responses, especially the links provided by Ol' Blue. I tried to post the link, but was unsuccessful.
Hope this helps
10-07-2009, 08:31 PM
#3
Newbie
Join Date: Sep 2009
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.7
Here's the link. But I think a ZJ is entirely different. The site refers to the WJ. Also, a ZJ does use vacuum in it's HVAC system. And yes, I believe you'll have to remove the dash.
http://www.wjjeeps.com/hvac_sub_assembly.htm
http://www.wjjeeps.com/hvac_sub_assembly.htm
Thread
Thread Starter
Forum
Replies
Last Post
bradleyheathhays
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
10-03-2015 09:51 PM
lozo63
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-03-2015 05:25 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
