No start/ '94 jeep grand cherokee limited. 5.2 v8
#1
No start/ '94 jeep grand cherokee limited. 5.2 v8
I was having trouble with it starting, long delay after ignition turned on before fuel pump primed. I tested crankshaft position sensor, camshaft position sensor, map sensor, throttle position sensor, intake air temp sensor according to how I understood the Haynes manual, they all tested ok. I changed the coolant temp sensor, fuel pump relay, fuel pressure regulator. It totally quit, no fuel pressure although when I hotwire the fuel pump relay the pump runs and brings the pressure up to bout 50 lbs. also not getting spark. I had disconnected the security system awhile back thinkin maybe it was causing a problem, didn't change a thing. I also (now that it totally quit) changed the capacitors in the ECM. Idk what to do next
#3
Ok well you have narrowed this down to an electrical problem. You aren't getting spark, and you aren't getting any fuel pressure unless you hotwire the fuel pump relay. Id suggest checking all of your wiring. I don't know how the alarm system is wired in, so i cant tell you if it is a problem
Thread
Thread Starter
Forum
Replies
Last Post
Tompop
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
16
08-25-2015 03:35 PM
Buddylove1991
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
08-20-2015 08:28 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)