Project Rachet
#1
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: Genoa, IL
Posts: 3,270
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Project Rachet
Well picked this guy up a couple days ago. It's a 99 4.0L with 108K on it. Has a 4.5 inch Rock Krawler lift kit, Olympic front bumper and thats pretty much it, for right now. Has some rust issues (living in Illinois sometimes sucks)that I am going to fix. Also has a few dents and dont like the ripped off fender look. Here are a few pictures.
My plans for it are...
New cd player-old one works but want to do some audio work.
Rugged Ridge air intake
Iron Rock Offroad air intake
Bushwacker flat fenders
Iron Rock Offroad 2.5 inch cat back exhaust
New Quadratec floor mats
New speakers.
Gen-right hood louvers.
New shocks at all four corners
This will probably be a daily driver. It might see some mild offroading but I already a built ZJ for my all time trail rig.
More pictures and updates to follow.
Oh, how do I get some CherokeeForum stickers? I had them on my previous XJ and need to get some more
My plans for it are...
New cd player-old one works but want to do some audio work.
Rugged Ridge air intake
Iron Rock Offroad air intake
Bushwacker flat fenders
Iron Rock Offroad 2.5 inch cat back exhaust
New Quadratec floor mats
New speakers.
Gen-right hood louvers.
New shocks at all four corners
This will probably be a daily driver. It might see some mild offroading but I already a built ZJ for my all time trail rig.
More pictures and updates to follow.
Oh, how do I get some CherokeeForum stickers? I had them on my previous XJ and need to get some more
#2
CF Veteran
Join Date: Jun 2011
Location: Alabama
Posts: 4,618
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: I6
about the stickers, theres a thread in the announcements section i think to buy them. And it looks really good, Cant wait to see updates,, any pics of the ZJ
#3
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: Genoa, IL
Posts: 3,270
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Found it thanks. I'll find a couple pictures of the ZJ. That also is going under the knife and getting a little rebuild.
#4
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: Genoa, IL
Posts: 3,270
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Xmas is going to come a bit early for me. Ordered.....
*Bushwacker's flat fenders
*Xenon Hyper White H4 kit
*Cold air intake by Rugged Ridge
Tomorrow I am going to look into get a IRO throttle body spacers, and their 2.5 inch exhaust kit with the high flo cat.
Pictures coming soon.
*Bushwacker's flat fenders
*Xenon Hyper White H4 kit
*Cold air intake by Rugged Ridge
Tomorrow I am going to look into get a IRO throttle body spacers, and their 2.5 inch exhaust kit with the high flo cat.
Pictures coming soon.
Trending Topics
#8
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: Genoa, IL
Posts: 3,270
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
@MTLXJ, didnt pay anything for it. Traded the guy my 98 ZJ for it. And yes, the previous owner didnt take the greatest care of the thing. It was his wheeler. Which eventually will probably come mine as well but I am doing a little catch up and adding a few things as well.
@Joe, will do. I am actually planning on ordering a cd player from you guys with the install kit and some front floor mats as well.
@500dollarJeep, it has a decent stance but the shocks in the rear are shot and I think I am going to do new leaf packs in the rear as well.
Did do a little ordering today.
Ordered up a new tie rod and tie rod ends from Iron Rock. Along with their 2.5 inch cat back exhaust. The stock exhaust isnt going to cut it one bit. Pictures of everything to come soon.
@Joe, will do. I am actually planning on ordering a cd player from you guys with the install kit and some front floor mats as well.
@500dollarJeep, it has a decent stance but the shocks in the rear are shot and I think I am going to do new leaf packs in the rear as well.
Did do a little ordering today.
Ordered up a new tie rod and tie rod ends from Iron Rock. Along with their 2.5 inch cat back exhaust. The stock exhaust isnt going to cut it one bit. Pictures of everything to come soon.
Last edited by Moparboy01; 05-07-2012 at 12:11 PM.
#9
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: Genoa, IL
Posts: 3,270
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Quadratec's front floor mats came in today. Waiting on another package from the brown truck. The new CD player.
Tomorrow 4wd.com's order comes in which includes
*Bushwacker's flat fenders
*Delta H4 headlights
*Rugged Ridge Cold Air Intake system
This weekend my club and I are doing our annual Halloween Run at Cliff's Insane Terrain, time to take out the trail ZJ. Pictures of the new products and wheeling trip will be posted.
Tomorrow 4wd.com's order comes in which includes
*Bushwacker's flat fenders
*Delta H4 headlights
*Rugged Ridge Cold Air Intake system
This weekend my club and I are doing our annual Halloween Run at Cliff's Insane Terrain, time to take out the trail ZJ. Pictures of the new products and wheeling trip will be posted.
#11
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: Genoa, IL
Posts: 3,270
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Quick update.
Rugged Ridge air intake came in today-installed
New Sony CD player cam in-installed
Delta H4 headlights came in-installed
Bushwacker Flat Fenders came in-installing this weekend or Monday.
I'll have pictures of everything as soon as I can get them up.
Also coming in the brown truck
Iron Rock Offroad 2.5 inch exhaust
Iron Rock Throttle Body Spacer
Iron Rock HD Tie rod and new tie rod ends.
I'll have pictures of everything soon. Cant wait to see the flat fenders on Rachet.
Rugged Ridge air intake came in today-installed
New Sony CD player cam in-installed
Delta H4 headlights came in-installed
Bushwacker Flat Fenders came in-installing this weekend or Monday.
I'll have pictures of everything as soon as I can get them up.
Also coming in the brown truck
Iron Rock Offroad 2.5 inch exhaust
Iron Rock Throttle Body Spacer
Iron Rock HD Tie rod and new tie rod ends.
I'll have pictures of everything soon. Cant wait to see the flat fenders on Rachet.
#13
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: Genoa, IL
Posts: 3,270
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Thanks. There are a lot of things I'd like to do with it but it all depends on the cash flow and with the holidays coming, the kids come first. But more updates to come, trust me.
#15
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: Genoa, IL
Posts: 3,270
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Installed the rear Bushwacker flatfenders today. Pretty simple stuff. Tomorrow going to finish the front up and I'll post some pictures. Love the look of them already.