Project Mercenary
#721
Senior Member
Thread Starter
Like I said.. we'll see how long it lasts haha
Also just picked up a set of Rock Krawler 2.0 RRD Racing shocks in 11" travel. I'm not 100% on running them yet, but the price was too good to pass up. I dig the anodized aluminum fluted body and nitrotec shafts. Plus I like how RK will rebuild them pretty cheap and can also add a remote resi for a pretty decent price as well. If nothing else these will be good for the mean time until I get good some measurements for some fox or bilsteins.
Also just picked up a set of Rock Krawler 2.0 RRD Racing shocks in 11" travel. I'm not 100% on running them yet, but the price was too good to pass up. I dig the anodized aluminum fluted body and nitrotec shafts. Plus I like how RK will rebuild them pretty cheap and can also add a remote resi for a pretty decent price as well. If nothing else these will be good for the mean time until I get good some measurements for some fox or bilsteins.
Last edited by Jeepology; 03-23-2017 at 02:34 PM.
#723
CF Veteran
Not sure if I missed this, did you open the rear wells up for the 37s? Cut and fold won't cut it to get the most tucked up there.
#724
Senior Member
Thread Starter
Yes. Not sure if you've ever seen the install of Notch flares in the rear, but it requires more than a standard cut and fold. Opens up nicely.
#728
Senior Member
Thread Starter
#731
Senior Member
Thread Starter
Well if anyone is looking for an axle the RJ60 I was going to put in the rear is now for sale
PM if seriously interested.
��4.88 gears
��ARB air locker
��Thick wall tubes
��AR400 skid plate
��35 spline 4340 chromoly shafts
��New Premium Centric rotors
��G2 cover
��Truss for 4 link and coilovers at the moment.
��Will include new TnT U bolt eliminators & shock mounts if you want to convert for leafs in your XJ. 61" WMS
��Tilted center section makes for more clearance than a standard 44 and better oiling.
Can ship via fastenal for roughly $150 to most places.
PM if seriously interested.
��4.88 gears
��ARB air locker
��Thick wall tubes
��AR400 skid plate
��35 spline 4340 chromoly shafts
��New Premium Centric rotors
��G2 cover
��Truss for 4 link and coilovers at the moment.
��Will include new TnT U bolt eliminators & shock mounts if you want to convert for leafs in your XJ. 61" WMS
��Tilted center section makes for more clearance than a standard 44 and better oiling.
Can ship via fastenal for roughly $150 to most places.
#735
CF Veteran