Roblaza

to answer your question, yes...and you can click the link in my sig and it'll take you right to the page

Batman33165

This what my dashboard looks now... gotta make it work! before the winter starts... and my friends start to go mudding...

JRT1393

Wow, that's a lot of wire! I'd hate to think what's behind my 2001 dash...

Batman33165

Ok applied for the group and I'd number.... now to wait for that, yea it was a lot of wiring... most of it was just hanginh with no connection or anything...

Today I'm going with a buddy for some cherokee parts to the junkyard

Vermonster01

How do you apply? I can't figure it out it just put me in it

Batman33165

Vermonster01 if u click on my signature it will take you to the main page and from there one of the other links will say apply... click that one and follow instructions...

For everyone else that is watching my bulid... after the junkyard the weather hasn't been too good to do anything, and my daily driver car ( dodge stratus) died on me on the road heading home... had to install new alternator, and batter, and as I was already fixing things I replaced the blower motor resistor...

I found some really great pieces off the junkyard cherokees... they need to be cleaned and installed but got tail light guards, both side mirrors, both side door handles replacement, rear wiper arm, manual crank handles x2, and a cig outlet...

It started to rain as I was working but I replaced the hydraulic arms to the back hatch because when i bought the jeep i had to put the door on the tire to get the back to stay open and removed the sway bar to clean it up and figure out a way to place it back that the disconnects stop hitting the coils

Batman33165

So i replaced the the stock side mirrors with a 97 cherokee ones... so much better they even are the folded type ones...

As well finally got my tail lights, turn signals, and brake lights working... as i was doing something else on my jeep my friend walt was checking out the wiring under the dash and found a ground wire just hanging there... connected to nothing... grounded it ... and bam! have lights now... now to work on my guages -.-

Batman33165

Having problems with the temp. On the jeep... starts off in the red and as I continue to leave it sit it raises to the 260 number and sometimes passes it... gotta fix this... I remember reading on another forum from cruiser that it could be the coolant resourvir... we'll see on friday when I buy a new one...

Batman33165

So this is the temp. Of the car off... and even when the car is started... I'm pretty sure till I fix that guage prob. Its gonna continue...

Batman33165

Since I'm waiting till payday I decided to do other things to the jeep that I got from the mail

The first is my zombie permits... they look awesome and grab attention.. got them off amazon if anyone wants to know... search them out....

The other is very Important... since I bought the car I haven't been able to lock it.. driver side door looked like someone tried jamming a philips and the passenger just didn't open... thanks to desertdog write up on replacing it, it was a snap

Batman33165

Well guys couldn't do much since I'm still waiting for the 13th to come but I replaced the coolant cap from the oem cap to the napa one (703-1396) crusier54 said...

and then I started to disconnect cables and and wires under the dash and some in the engine... used electric cleaner and a wire brush them... connected everything together and bam! My guages started minus the oil pressure and gas... but coolant, battery, spedometer, and the rpm work...

So with that great news I checked all the fluids, got the jeep ready and took it to its first bon fire/ mudding event and it did outstanding except that the tailpipe fell off and is now resting on the axle...

RememberTheMallamo

Same thing happened to my tail pipe the first time I ever went off road haha.

Batman33165

Did u make the tail pipe shorter or welded it back in place? Or just fixed the brackets?

Trying decide on what approach to take...

RememberTheMallamo

I just installed a new bracket and mounted it up a little higher. Never had another issue after that.

Batman33165

Hey guys been busy with school and work... but the little times i've had, i've started to take the floor apart... cutting out rust, sanding the floor and applying por 15...