Project Blueberry
#181
CF Veteran
Thread Starter
Welp ive got the typical ball joint "thud" when hitting pot holes. Got under her, and wobbled the tire back and forth and could see the BJ moving..soooooo Thats my next project. Jammed her full of grease for now. The PO was running 33x13.5's with spacers. so im sure that attributed to the problem.
#182
CF Veteran
Welp ive got the typical ball joint "thud" when hitting pot holes. Got under her, and wobbled the tire back and forth and could see the BJ moving..soooooo Thats my next project. Jammed her full of grease for now. The PO was running 33x13.5's with spacers. so im sure that attributed to the problem.
#184
CF Veteran
Thread Starter
Man this aussie locker "clicking" sure is annoying. I keep telling myself "its not a u-joint"
#185
CF Veteran
Thread Starter
OK, I finally picked up the Knuckles from JPXJMOAB. Tomorrow i will sand them down to paint. I also finally picked up the Upper Control Arms from IronManFab4x4. These things are pretty beefy. When i first opened the box, i thought i got 2 really big breakfast burritos wrapped in tin foil.
#186
CF Veteran
Join Date: Jan 2015
Location: Minnesota
Posts: 2,152
Likes: 0
Received 7 Likes
on
7 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Originally Posted by WyoCherokee
OK, I finally picked up the Knuckles from JPXJMOAB. Tomorrow i will sand them down to paint. I also finally picked up the Upper Control Arms from IronManFab4x4. These things are pretty beefy. When i first opened the box, i thought i got 2 really big breakfast burritos wrapped in tin foil.
#189
CF Veteran
Thread Starter
Temporary until i can get the time to install the 3 link. I cant even go over a cattle guard without the front end sounding like its gonna fall off. The UCA bushings on the frame end are completely toast.
#192
Member
Join Date: Apr 2015
Location: Sanford, FL
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
#193
CF Veteran
Thread Starter
#195
CF Veteran
Thread Starter