my chop top update
#1
Senior Member
Thread Starter
Join Date: Dec 2008
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 soon to be gc ho 4.0
my chop top update
started my chop today, lots of cover up sheetmetal work to be done this week so i dont need suggestions or criticizm on how ugly it looks or how ****ty it is right now,IM NOT DONE...now then heres how it looked before dark, i have tube work started in rear area alon rails and sheet metal under hatch/glass welded in pretty much i just need to finish sheet metal work and all the cosmetic work this week its almost sealed up to...leaks in three places now by the way its way further along than in pics ill post more tommorow it actually turned out looking pretty good by the end of night...
#3
Senior Member
Thread Starter
Join Date: Dec 2008
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 soon to be gc ho 4.0
thanks man,
alsoif anyone is wondering about some cosmetics im gonna wrap some sheet around sides of hatch and where i cut in body and weld and clean up sides, and body lines, and bondo some smaller crevices, other than that i filled sides with 3/8 plate ontop of old rear pillers and im going to cover those too, should look nice all around when i get done with the cosmetic stuff then im jumpin right in my exo build,
alsoif anyone is wondering about some cosmetics im gonna wrap some sheet around sides of hatch and where i cut in body and weld and clean up sides, and body lines, and bondo some smaller crevices, other than that i filled sides with 3/8 plate ontop of old rear pillers and im going to cover those too, should look nice all around when i get done with the cosmetic stuff then im jumpin right in my exo build,
#7
Senior Member
Thread Starter
Join Date: Dec 2008
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 soon to be gc ho 4.0
Trending Topics
#9
Senior Member
Thread Starter
Join Date: Dec 2008
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 soon to be gc ho 4.0
yea i like it that way...i just hope when i built the exo cage that it serves its purpose and keeps the occupants safe....guess ill add triangulation when in doubt.
#10
Just a thought for another sweet mod. Fab some seat mount brackets to do a set of buckets in the rear. The additional seat heigth with the headrest may save the rear seat passengers from a headache, and keep the rear glass from breaking when someones noggin bounces off of it on the trail.
#11
Senior Member
Thread Starter
Join Date: Dec 2008
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 soon to be gc ho 4.0
good idea ive got some buckets i might try that...for now im waiting on my buddy to bring the tube bender over so i can start my cage
#12
CF Veteran
Join Date: Aug 2008
Location: Hollidaysburg, PA
Posts: 5,603
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0 lt. 242 cu.in.
That is the sweetest chop on a four door I have ever seen! Dude you rock! I want to do that to mine now.
#14
CF Veteran
Join Date: Aug 2008
Location: Hollidaysburg, PA
Posts: 5,603
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0 lt. 242 cu.in.
It does, because we have a unibody, but it shouldnt weaken it by too much. But you can compensate the weakness with a cage, which is what Crashzx6r is doing