MY 94 XJ very slow build.
#32
Senior Member
Thread Starter
Join Date: Jan 2014
Location: coon rapids MN
Posts: 558
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 H.O
Had a fun weekend of wheeling need to make some changes to the jeep for the places I wheel 3in is just to low for the places I wheel spent a lot of time today dragon the belly. I'm going to up the lift to 5.5 iro long arm. What do you guys think is 5.5 to high. I already have the rear leafs and shackles need shocks arm and front springs longer front brake lines.
#33
Senior Member
Thread Starter
Join Date: Jan 2014
Location: coon rapids MN
Posts: 558
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 H.O
Got my rear leafs put back together today going to pick up my long arms some time next week. The rear is sitting at 5in right know. So I'm thinking 5.5in front coils I still have the option to go up a 1/2 in in the rear if I use the lower hole on the rear shackle.
#34
Senior Member
Thread Starter
Join Date: Jan 2014
Location: coon rapids MN
Posts: 558
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 H.O
After three day of working on the xj I finely got the long arm installed the kit didn't come with directions but it was pretty straight forward I went with iro 5.5 in long arms because they are local to me and the customer service is top notch.
#36
Senior Member
Thread Starter
Join Date: Jan 2014
Location: coon rapids MN
Posts: 558
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 H.O
I still need to add longer front brake lines before I can really wheel it hard. I ended up getting the adjustable arms because the fixed arms are out of stock right know. The kit is beefy and I cant wait to give it the shake down run.
#42
Senior Member
Thread Starter
Join Date: Jan 2014
Location: coon rapids MN
Posts: 558
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 H.O
Got my front brake lines installed last night. Went with 95 chevy c1500 2wd front lines worked great had to do a little grinding to get them to fit all went well. I'm pretty good with a grinder lol.