Jed.
#31
Seasoned Member
Thread Starter
Join Date: Oct 2014
Location: Buffalo NY
Posts: 383
Likes: 0
Received 3 Likes
on
3 Posts
Year: 2000 shell
Model: Cherokee
Engine: 1998 4.0l I6
Jed.
I almost forgot, one of these days I need to swap in new u bolts center pins and shock mounts for my rear end that'll be fun
#32
Member
Join Date: Jun 2015
Location: NEW YORK
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
i saw this on cl i think im buying a drivesaft off you soon, and sorry if i havent gotten back to you, but im from niagara falls area glad everyone is ok
#34
Seasoned Member
Thread Starter
Join Date: Oct 2014
Location: Buffalo NY
Posts: 383
Likes: 0
Received 3 Likes
on
3 Posts
Year: 2000 shell
Model: Cherokee
Engine: 1998 4.0l I6
Jed.
So I should get my tires this week, hopefully something else I've been waiting for too. I got the headliner pulled to begin hooking up my cb and second soundbar. I also pulled the front bumper for some fresh paint.
#35
Seasoned Member
Thread Starter
Join Date: Oct 2014
Location: Buffalo NY
Posts: 383
Likes: 0
Received 3 Likes
on
3 Posts
Year: 2000 shell
Model: Cherokee
Engine: 1998 4.0l I6
Jed.
So, I found a killer deal on a detours backbone 30 mins away from me. Tires were put on the back burner and shocks moved up because of the suprise purchase. I'll post pics tomorrow when there's sun light
#37
Seasoned Member
Thread Starter
Join Date: Oct 2014
Location: Buffalo NY
Posts: 383
Likes: 0
Received 3 Likes
on
3 Posts
Year: 2000 shell
Model: Cherokee
Engine: 1998 4.0l I6
Got some stuff in this morning. Front and rear 5100s, a new bezel for my head unit because the other cracked in the accident, and the hanger for the muffler that's supposed to be here tomorrow I also have a spring and antenna connector coming in this week too. Tomorrow the front shocks go in and the beat rears come out, I also get to replace the rear mounts at the axle and with my luck on top... IF I get all that done then I can put my interior back together and route the coax for the cb. Then I just need to bleed the brakes, buy the 33s, clean the quick discos up, run power for the cb, swap the good hatch on, get new bump stops, replace the charcoal canister hard lines, remount my fire extinguisher, get two more ubolts, fix the snapped bolt for the u joint strap, remount the rearview, install my hitch, and that's most of it. it's fun I promise. This one hasn't made me bleed yet haha
#38
Seasoned Member
Thread Starter
Join Date: Oct 2014
Location: Buffalo NY
Posts: 383
Likes: 0
Received 3 Likes
on
3 Posts
Year: 2000 shell
Model: Cherokee
Engine: 1998 4.0l I6
Well she's getting there. Antennas hooked up and the front ends finished. New mufflers on too just waiting for the ambition to fix all of the rear shock mounts
#39
Seasoned Member
Thread Starter
Join Date: Oct 2014
Location: Buffalo NY
Posts: 383
Likes: 0
Received 3 Likes
on
3 Posts
Year: 2000 shell
Model: Cherokee
Engine: 1998 4.0l I6
Well I started fixing the shock mounts today. Cut the two on the axle off couldn't find a 5/8 bit to drill them out, decided to cut the tops off but my angle grinders too big and I couldn't find the die so I decided to pull the shims (because at 4.5 I don't think I'll need them with the sye) and replace the center pins.... the bottom leaf on the passenger side was cracked in half and the pins didn't wanna budge so both packs got disassembled. Now they and the axle are under the Jeep on stands until I can get some cash to get smaller center pins cause the 3/8 are to big and get a new bottom leaf made. The good news is I can clean all the rust off and just maybe repaint em and it'll look nicer... until after winter. The only picture I took today was of the only top bolt I got out that didn't fight me....
#42
Seasoned Member
Thread Starter
Join Date: Oct 2014
Location: Buffalo NY
Posts: 383
Likes: 0
Received 3 Likes
on
3 Posts
Year: 2000 shell
Model: Cherokee
Engine: 1998 4.0l I6
Leaf packs are reassembled, new center pins new ubolts and the axles back up, all in 2.5 hours. I feel like a real mechanic pics are from the start to finish
#44
Seasoned Member
Thread Starter
Join Date: Oct 2014
Location: Buffalo NY
Posts: 383
Likes: 0
Received 3 Likes
on
3 Posts
Year: 2000 shell
Model: Cherokee
Engine: 1998 4.0l I6
No big deal, it's just lack of patience all I have left to do is drill the bottoms and put new ones in the top then it's waiting for tires. I'm definitely down for a cruise, I haven't been this excited since the little man was born