Ferrar Jeep Cherokee Build
08-07-2013, 10:48 AM
#241
Junior Member
Thread Starter
Join Date: Nov 2009
Location: Prescott, AZ
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: ATK Performance 4.0L
XJ's are all over this month! Couldn't believe it...two covers in the same month!
Cover of 4X4 GARAGE
Off Road Adventure Cover
Cover of 4X4 GARAGE
Off Road Adventure Cover
08-07-2013, 10:56 AM
#243
Junior Member
Thread Starter
Join Date: Nov 2009
Location: Prescott, AZ
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: ATK Performance 4.0L
I also went down to DYNO-COMP in Scottsdale, AZ yesterday...pulled some good baseline numbers before i do some new performance and cooling upgrades... on 37" tires the XJ pulled 115hp and 153ft-lbs of torque. Not bad for a stock ATK motor. Next up:
aFe Power stage 2 Cold Air Intake
aFe Power Twist Header
Painless 62mm Throttle Body
Yella Terra Roller Rockers
Flex-a-Lite XJ Cooling System Upgrade!
aFe Power stage 2 Cold Air Intake
aFe Power Twist Header
Painless 62mm Throttle Body
Yella Terra Roller Rockers
Flex-a-Lite XJ Cooling System Upgrade!
08-07-2013, 10:56 AM
#244
Junior Member
Thread Starter
Join Date: Nov 2009
Location: Prescott, AZ
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: ATK Performance 4.0L
08-07-2013, 12:21 PM
#246
Junior Member
Thread Starter
Join Date: Nov 2009
Location: Prescott, AZ
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: ATK Performance 4.0L
Getting ready for installs...Good stuff!
aFe Power stage 2 Cold Air Intake
aFe Power Twisted Header
Painless 62mm Throttle Body
Yella Terra Roller Rockers
Flex-a-Lite XJ Cooling System
Getting Started!
aFe Power stage 2 Cold Air Intake
aFe Power Twisted Header
Painless 62mm Throttle Body
Yella Terra Roller Rockers
Flex-a-Lite XJ Cooling System
Getting Started!
08-07-2013, 01:41 PM
#247
Senior Member
Join Date: Nov 2011
Location: Snowville, PA
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 I6 torque monster w/ a supercharger
Congrats on making the covers!! 
Are those Yella Terras 1.7 ratio?
Are you going to use that paper exhaust/intake gasket or get a Victor Reinz metal one?
So..... Next step = supercharger???
Are those Yella Terras 1.7 ratio?
Are you going to use that paper exhaust/intake gasket or get a Victor Reinz metal one?
So..... Next step = supercharger???
Last edited by bpas328xi; 08-07-2013 at 01:59 PM.
08-08-2013, 09:43 AM
#248
Seasoned Member
Join Date: Jul 2013
Location: Clinton, SC
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
Thanks ORFXJ about the info on the bumpers! Are the quarter panels textured also and is the bushwaker flares been textured cause they look more shiny/textured than the ones on my jeep?
08-08-2013, 02:06 PM
#250
Newbie
Join Date: May 2013
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Exceptional build, there is an XJ here in Rochester Hills, Michigan very much like your build but with an ATK (Chrysler 4.7 Stroker). I am also in the midst of a build with a 4.6 Golen Stroker, ARB lockers front and rear on the stock rebuilt axles which will be fine for everything this state's topography can throw at it. Really cool rig and you have certainly inspired many, thanks for sharing your build openly it is very difficult to glean what the best options for parts are, your build helps to shed light on most questions, very thorough build. How difficult was the Atlas install? I have been trying to find a reason to install one but the well is running dry and the CFO wife is not on board
Last edited by LPIII; 08-08-2013 at 07:10 PM.
