Build project: an 88 story, anti bolt on build
#16
Registered Users
Join Date: Aug 2009
Location: Ny
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0ho
awesome build, I've got some 4x2 3/16 sitting to do my rockers here eventually, I'm sick of welding after building my bumpers and floors lol
#18
CF Veteran
Thread Starter
Join Date: Jul 2011
Location: Oceanside So Cal
Posts: 1,045
Likes: 0
Received 1 Like
on
1 Post
Year: 88
Model: Cherokee (XJ)
Engine: 4.0 renix
after all that ,think i would have to park my welder for awhile also!I like your rear bumper..just cruised your build thread on that..might have to steal some of your ideas cause i really like the way you sleeved the frame out back.
#20
CF Veteran
Thread Starter
Join Date: Jul 2011
Location: Oceanside So Cal
Posts: 1,045
Likes: 0
Received 1 Like
on
1 Post
Year: 88
Model: Cherokee (XJ)
Engine: 4.0 renix
STUCK on HOLD for awhile!
Amazing! I can tear down semi's,dozers and cranes everyday for the last 15 years and yet...i slip a disk in my back doing this?!!!!
bumper and hitch removal
Doc gave me some norco's and told me to not do s*** for a few weeks.
So quess i just hang out a sketch some bumpers and tire carriers.
Amazing! I can tear down semi's,dozers and cranes everyday for the last 15 years and yet...i slip a disk in my back doing this?!!!!
bumper and hitch removal
Doc gave me some norco's and told me to not do s*** for a few weeks.
So quess i just hang out a sketch some bumpers and tire carriers.
Last edited by Domaas; 10-30-2011 at 04:52 PM.
#21
Registered Users
Join Date: Jul 2011
Location: 92392
Posts: 618
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Dude I've gotta ask, what would you charge to do rockers/mini boatsides? Basically the same as yours?
And do you build bumpers? I've been calling everyone I know that fabs and alot of guys are either not interested or charge way tooo much!
I'm looking to get some simple bumpers made...Like really simple lol.
Maybe I can pm you and see if your interested?
And do you build bumpers? I've been calling everyone I know that fabs and alot of guys are either not interested or charge way tooo much!
I'm looking to get some simple bumpers made...Like really simple lol.
Maybe I can pm you and see if your interested?
#23
Junior Member
Join Date: May 2011
Location: Redondo Beach, CA
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Grand Cherokee
Engine: 4.0
Dude I've gotta ask, what would you charge to do rockers/mini boatsides? Basically the same as yours?
And do you build bumpers? I've been calling everyone I know that fabs and alot of guys are either not interested or charge way tooo much!
I'm looking to get some simple bumpers made...Like really simple lol.
Maybe I can pm you and see if your interested?
And do you build bumpers? I've been calling everyone I know that fabs and alot of guys are either not interested or charge way tooo much!
I'm looking to get some simple bumpers made...Like really simple lol.
Maybe I can pm you and see if your interested?
#25
CF Veteran
Thread Starter
Join Date: Jul 2011
Location: Oceanside So Cal
Posts: 1,045
Likes: 0
Received 1 Like
on
1 Post
Year: 88
Model: Cherokee (XJ)
Engine: 4.0 renix
Well, being down and out sucks. Nothing worse than sitting at home and staring at my POS knowing i wont be able to even clean up my garage, much less put a wrench on it for awhile.
So....i got bored and downloaded this little programfrom google called scketch, its pretty cool, and i know a few of you use it on here. I just used the free version.
Well i cant wrench, but i can type, so i came up with this? what you guys think? I couldn't figure out how to make the stinger round, or "D" rings, but you get the idea.
bumper idea
I left a "flat in the middle for a winch maybe later?
So....i got bored and downloaded this little programfrom google called scketch, its pretty cool, and i know a few of you use it on here. I just used the free version.
Well i cant wrench, but i can type, so i came up with this? what you guys think? I couldn't figure out how to make the stinger round, or "D" rings, but you get the idea.
bumper idea
I left a "flat in the middle for a winch maybe later?
#26
CF Veteran
Join Date: Sep 2010
Location: Springville, UT
Posts: 1,649
Likes: 0
Received 1 Like
on
1 Post
Year: 1993
Model: Grand Cherokee
Engine: 5.2 V8, Dual cold air, dual batts, E-fan, Sanden OBA
that bumper looks good, and im gonna make my own diff covers. Have made a set before but im still trying to dig up the pictures, basically just lay the factory ones out on some paper, trace around it, cut it out-then stick the cutout against the diff, cut out the inside ring and woolah you have the base. Then just measure how far out the cover is at its furthest point and go to town with the plasma. Oh and nice build!
#27
CF Veteran
Thread Starter
Join Date: Jul 2011
Location: Oceanside So Cal
Posts: 1,045
Likes: 0
Received 1 Like
on
1 Post
Year: 88
Model: Cherokee (XJ)
Engine: 4.0 renix
Thanks for the input on the bumper, i have had a hard time being down with a back injury..so playing on the computer and surfing here has really helped passed the time.
Soon as i get better im gonna cut/fold the rear quarters, and start on the bumpers and diff covers..still saving change for the joints for the link front end
Soon as i get better im gonna cut/fold the rear quarters, and start on the bumpers and diff covers..still saving change for the joints for the link front end
#28
CF Veteran
Thread Starter
Join Date: Jul 2011
Location: Oceanside So Cal
Posts: 1,045
Likes: 0
Received 1 Like
on
1 Post
Year: 88
Model: Cherokee (XJ)
Engine: 4.0 renix
well..the back is still not right but i got tired of sitting around.so i loaded up on some feel goods and got to work..lol
Started the cut and fold...pretty easy.still need to seal up, and make a trim panel..
then i went down to the local steel yard...scorded some fresh steel at a cheap price..only $.55 a pound, cam out to $85.bucks, and got enough for the front, rear, and maybe a cross member?
started making this.
just some cut and fit..
after some welding and grinding, to blend. Its gonna sit flush with the cut and fold rear quarters. It will stick out past the quarters a a bit.. but adds room for the rest comming..shhh its a suprise..lol
well..the meds wearing off...sore..time to go for now..hopefully 100%soon, then more to come.
edit: i will be adding some clevis mounts as well.
Started the cut and fold...pretty easy.still need to seal up, and make a trim panel..
then i went down to the local steel yard...scorded some fresh steel at a cheap price..only $.55 a pound, cam out to $85.bucks, and got enough for the front, rear, and maybe a cross member?
started making this.
just some cut and fit..
after some welding and grinding, to blend. Its gonna sit flush with the cut and fold rear quarters. It will stick out past the quarters a a bit.. but adds room for the rest comming..shhh its a suprise..lol
well..the meds wearing off...sore..time to go for now..hopefully 100%soon, then more to come.
edit: i will be adding some clevis mounts as well.
Last edited by Domaas; 11-13-2011 at 11:56 PM.
#29
Registered Users
Join Date: Aug 2009
Location: Ny
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0ho
nice to see someone else likes my idea of turning in the rear bumper corners as apposed to keeping it square. I caught some flack about it exposing the tail lights for backing up in tight spaces (woods wheeling) but other then that, people like it. I considered going under the sides on mine, and still might eventually. thats the beauty of fabbing stuff, you can always add to it.
looking good.
looking good.
#30
CF Veteran
Thread Starter
Join Date: Jul 2011
Location: Oceanside So Cal
Posts: 1,045
Likes: 0
Received 1 Like
on
1 Post
Year: 88
Model: Cherokee (XJ)
Engine: 4.0 renix
i like the tucked look a bit...but undecided on what to do bout the lights them selves? thinkin of maybe fabing up some new LED boxes? and maybe throwin a taper in there where the oriinal "back up" light was..what you think?
BTW, if anyone was wonderin...back still a no go at least for fabbing stuff up for my junk...and the "honeydew" list is growing out of control...lol.gotta love being a home owner. Do these things self destruct after escrow...i mean really?!!!
BTW, if anyone was wonderin...back still a no go at least for fabbing stuff up for my junk...and the "honeydew" list is growing out of control...lol.gotta love being a home owner. Do these things self destruct after escrow...i mean really?!!!