The build on my '99 XJ!
#1
CF Veteran
Thread Starter
Join Date: Oct 2009
Location: Northeast CT
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4.0
The build on my '99 XJ!
Okay so this is what I've been working on for the past month or so. I picked up a 99 XJ with 2k on the body and 1k on the motor, about a year ago and finally decided to lift it with the parts off a wrecked 01 I have. It had the d30 in the front that I replaced, and the Chryco 8.25 out back. The front is all finished now I just need to finish up the linkage with the t-case, and get the stupid broke shock bolts out in the back, and get the leaf spring eye bolts out that I had to cut. Heres what I've done:
Rubicon Express 5.5"
33" BF Goodrich A/T
Took the d30 out of the 99 and replaced it with the one from the 01
Replaced the stock np242 with a np231 that had a SYE and CV driveshaft
JKS Quicker Disco's (that you can see hanging)
JKS bar pin elminators
Rustys Throttle body spacer
K&N air intake with Rustys mounting bracket
Black Cragar steel rims
Control arm drop brackets
Skyjacker extended brake lines
Slotted Rotors
and probably more that I'm forgetting, pretty much did a complete overhaul on this Jeep. Cant wait to have it done!! Heres some pics for your pleasure.
Rubicon Express 5.5"
33" BF Goodrich A/T
Took the d30 out of the 99 and replaced it with the one from the 01
Replaced the stock np242 with a np231 that had a SYE and CV driveshaft
JKS Quicker Disco's (that you can see hanging)
JKS bar pin elminators
Rustys Throttle body spacer
K&N air intake with Rustys mounting bracket
Black Cragar steel rims
Control arm drop brackets
Skyjacker extended brake lines
Slotted Rotors
and probably more that I'm forgetting, pretty much did a complete overhaul on this Jeep. Cant wait to have it done!! Heres some pics for your pleasure.
Last edited by rweaver138; 10-25-2009 at 06:17 PM.
#5
CF Veteran
Thread Starter
Join Date: Oct 2009
Location: Northeast CT
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4.0
Okay got the lift finished! Finished it up Monday night about 12 oclock. Gotta few odds and ends i gotta tie up but here she is.
Gotta take those fender flares off and trim my fenders, those 33's rub bad when i cut the wheel.
Still to come:
Front grille gaurd
roof rack w/ tire, shovel, high lift mount
4 full size kc's on the roof rack
rear bumper
and hopefully more after that stay tuned!
Gotta take those fender flares off and trim my fenders, those 33's rub bad when i cut the wheel.
Still to come:
Front grille gaurd
roof rack w/ tire, shovel, high lift mount
4 full size kc's on the roof rack
rear bumper
and hopefully more after that stay tuned!
Trending Topics
#9
CF Veteran
Thread Starter
Join Date: Oct 2009
Location: Northeast CT
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4.0
ok got some progress done over the past week. trimmed my front fenders and put black molding around the sharp edge. also cut the bumper caps need to smooth those down prolly but some more molding on that too. also got my roof rack on with the spare, shovel, and hi-lift. its a little crooked cuz it came off a wrecked jeep gotta do some tweaking to it..
and here are the pics!
and here are the pics!
#10
Member
Join Date: Feb 2009
Location: Hermiston, OR
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 2.5L I4 TBI
HAHA LOVE THE STICKER ON THE BACK WINDOW!!! Lookin good man... Is it just me or does anyone else notice that most of the 99s and 00s are that bluish color
#15
CF Veteran
Thread Starter
Join Date: Oct 2009
Location: Northeast CT
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4.0
still not sure what im doin with the rear. idk if it want to fold it up or cut it clean or leave it. still debating only time will tell. what do you guys think?