BarrelMakers Build
#18
CF Veteran
Thread Starter
Join Date: Mar 2012
Location: Holland MI
Posts: 1,785
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Getting DOM for trac bar.
Working on "coil buckets" for the spring to sit in.
Frame side trac bracket to be made when Jeep goes together.
Wj knuckles to be welded soon, handed over to welder.
After this ill have to tackle my Michigan rust.
Working on "coil buckets" for the spring to sit in.
Frame side trac bracket to be made when Jeep goes together.
Wj knuckles to be welded soon, handed over to welder.
After this ill have to tackle my Michigan rust.
#21
CF Veteran
Thread Starter
Join Date: Mar 2012
Location: Holland MI
Posts: 1,785
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Haven't done to much to the Jeep since I'm waiting on stuff.
Pulled a unit bearing off of the spare axle, so i can get my wj knuckle spacers welded up at work.
Pulled a unit bearing off of the spare axle, so i can get my wj knuckle spacers welded up at work.
#23
CF Veteran
Thread Starter
Join Date: Mar 2012
Location: Holland MI
Posts: 1,785
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I got word that my long arms should be shipping out this week.
That means it'll be soon that ill slap it all together, so then there will be pictures of the whole setup, i can't wait.
That means it'll be soon that ill slap it all together, so then there will be pictures of the whole setup, i can't wait.
#27
CF Veteran
Thread Starter
Join Date: Mar 2012
Location: Holland MI
Posts: 1,785
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
One knuckle welded, just did 3 stitch welds around the bolts, i think it'll be good.
Welding the other one tomorrow.
Welding the other one tomorrow.