Bare Necessity - Page 8

offroadnut36 · 01-24-2010, 04:49 PM

alls he did was post pics. we need to know what you are doing and why. and what you are planning on doing.

bigomudders · 01-24-2010, 04:56 PM

Well I cut the entire front off except frame rails and I'm going to run a roll cage setup tied into frame up front, out back I've cut the fender wells completly out and I am going to box it in so I have more tire clearance.

jarretthise · 01-24-2010, 05:08 PM

Post some pics of the progress. Following this build the rest of the way. Looking good and well "bare" lol

rdeskater · 01-24-2010, 06:47 PM

y not a 383 stroker? power and torque beyond belief rock solid motor... more than you'll need but isnt that the point in a stricly trail rig???

offroadnut36 · 01-25-2010, 12:19 AM

Quote:

Originally Posted by bigomudders

Well I cut the entire front off except frame rails and I'm going to run a roll cage setup tied into frame up front, out back I've cut the fender wells completly out and I am going to box it in so I have more tire clearance.

AHAH! Sounds like someone's gonna have a sick beast when they're done

...

xclusive · 01-25-2010, 12:48 AM

if u could do a step by step on geting the small block in and the header setup and motor mount locations that would be great.. just picked up a 92 4 door body and i have a 450 horse lt1 im gonna put in it with 44 front 60 rear so any info on problems and solutions would save me a ton of time.. looks like you are going good, good luck with the rest of the build..

bigomudders · 01-25-2010, 06:39 PM

Quote:

Originally Posted by xclusive

if u could do a step by step on geting the small block in and the header setup and motor mount locations that would be great.. just picked up a 92 4 door body and i have a 450 horse lt1 im gonna put in it with 44 front 60 rear so any info on problems and solutions would save me a ton of time.. looks like you are going good, good luck with the rest of the build..

When I get to that point of the build I will post pics of step by step on how I set everything up.

00XJ · 01-25-2010, 08:25 PM

Great day the suspence is killing me!

xclusive · 01-25-2010, 11:10 PM

Quote:

Originally Posted by bigomudders

When I get to that point of the build I will post pics of step by step on how I set everything up.

awesome that would be great thanks.. gogogogogogogo

unchartedpath · 01-25-2010, 11:20 PM

this thing is going to be a beast when your done cant wait to see the finished product.

bigomudders · 02-07-2010, 06:11 PM

I have decided to replace entire firewall. Putting only the holes required for the gas, brake and the few wires needed to run jeep. Will have pics by next weekend.

ckysodkorn_xj · 02-07-2010, 06:18 PM

love this build hope to do one of my own one day..

offroadnut36 · 02-07-2010, 10:19 PM

cant wait for pics!

99XJDad · 02-08-2010, 12:02 PM

This is going to be insane!

qdw2008 · 02-08-2010, 06:55 PM

after searching every available reasorce there is but one word to explain this build: AWESOME!!

01-24-2010, 04:56 PM	#107
bigomudders CF Veteran Join Date: Mar 2009 Posts: 1,090 My Photos 1995 Cherokee Year: 1995 Model: Cherokee Engine: 4.0 Transmission: automatic AW4 Transfer Case: 242 Front Axle: dana 30 Rear Axle: dana 35 Tires: 33/12.50/15 bfg km2 Lift Specifications: 8 in front 6 in rear Misc Accessories: custom bumpers, 8,000lb winch, CB	Well I cut the entire front off except frame rails and I'm going to run a roll cage setup tied into frame up front, out back I've cut the fender wells completly out and I am going to box it in so I have more tire clearance. __________________ I believe GOD gives me the ability to get over the rock, and the patience not to pick it up and hit someone with it.

01-24-2010, 05:08 PM	#108
jarretthise Member Join Date: Oct 2009 Location: crawfordsville, In Posts: 236 My Photos 1996 Cherokee Year: 1996 Model: Cherokee Engine: 4.0 Front Axle: d30 Rear Axle: d35 Tires: 33x12.50 baja claw Lift Specifications: 6" skyjacker	Post some pics of the progress. Following this build the rest of the way. Looking good and well "bare" lol __________________ 96 cherokee classic- midnight metallic blue, smittybuilt front and rear tube front bumpers(front has some of my custom touches to it), 6' skyjacker full lift kit with tubular lower and upper control arms, 33x12.50 baja claws, dick cepek rims, roof rack coming soon as well as a winch

01-25-2010, 08:25 PM	#113
00XJ Seasoned Member Join Date: Sep 2009 Location: Virginia Posts: 423 My Photos 2000 Cherokee Year: 2000 Model: Cherokee Engine: 4.0 inline 6 Transmission: 4 speed auto Transfer Case: NP231 Front Axle: d30 low pinion...i think Rear Axle: chrysler 8.25 Tires: bfg long trail Misc Accessories: magnaflow exhaust, sound system, cragar soft 8 wheels,	Great day the suspence is killing me! __________________ my new project, its gonna be a tough one!: http://www.cherokeeforum.com/f59/car...er-help-40961/

02-07-2010, 06:11 PM	#116
bigomudders CF Veteran Join Date: Mar 2009 Posts: 1,090 My Photos 1995 Cherokee Year: 1995 Model: Cherokee Engine: 4.0 Transmission: automatic AW4 Transfer Case: 242 Front Axle: dana 30 Rear Axle: dana 35 Tires: 33/12.50/15 bfg km2 Lift Specifications: 8 in front 6 in rear Misc Accessories: custom bumpers, 8,000lb winch, CB	I have decided to replace entire firewall. Putting only the holes required for the gas, brake and the few wires needed to run jeep. Will have pics by next weekend. __________________ I believe GOD gives me the ability to get over the rock, and the patience not to pick it up and hit someone with it.

02-07-2010, 06:18 PM	#117
ckysodkorn_xj CF Veteran Join Date: Dec 2009 Location: Sanford Posts: 1,209 My Photos 1993 Cherokee Year: 1993 Model: Cherokee Engine: 4.0L Rear Axle: chry 8.25 Lift Specifications: 2" BB Misc Accessories: warn 8274 winch.. little mods.	love this build hope to do one of my own one day.. __________________ CBW member #1 1993 cherokee sport 2' lift, warn 8274 winch kc 150w daylighters;white on black rims. 1980 cj7 amc 258 I6 clifford intake(6=8) holley 390 4 barrel carb bored .60 over -- SOLD! build page:http://www.cherokeeforum.com/f46/pro...eepjeep-34776/

01-24-2010, 06:47 PM	#109
rdeskater Member Join Date: Jul 2009 Location: Sullivan County NY Posts: 222 My Photos 1994 Cherokee Year: 1994 Model: Cherokee Engine: 4.0 High Output Transmission: auto Transfer Case: NP 231 Rear Axle: Chrysler 8.25 Tires: Firestone Destiation M/T 235/85/16 Ford Ranger Rims Lift Specifications: 4.5"Rough Country Full Spring Pack Misc Accessories: Roof Rack with Navigator Halogens, LED Fog Lights, Drop Pitman Arm	y not a 383 stroker? power and torque beyond belief rock solid motor... more than you'll need but isnt that the point in a stricly trail rig???

01-25-2010, 12:48 AM	#111
xclusive Newbie Join Date: Nov 2009 Posts: 22 My Photos 1993 Cherokee Year: 1993 Model: Cherokee Engine: 4.0 Transmission: auto Front Axle: locked Rear Axle: locked Tires: 36 inch iroks Lift Specifications: 5.5 rubicon express	if u could do a step by step on geting the small block in and the header setup and motor mount locations that would be great.. just picked up a 92 4 door body and i have a 450 horse lt1 im gonna put in it with 44 front 60 rear so any info on problems and solutions would save me a ton of time.. looks like you are going good, good luck with the rest of the build..

01-25-2010, 11:20 PM	#115
unchartedpath Junior Member Join Date: Jan 2010 Location: Beaverton Posts: 34 My Photos 1995 Cherokee Year: 1995 Model: Cherokee Engine: 4.0 I6 Transmission: AW4 Transfer Case: np231 Front Axle: D30 Rear Axle: D44 Tires: 235/70R15 Lift Specifications: none Misc Accessories: Open Air intake, 24" holley glass pack, front strobes(green)	this thing is going to be a beast when your done cant wait to see the finished product.

02-08-2010, 12:02 PM	#119
99XJDad Seasoned Member Join Date: Jan 2009 Location: Mountains Posts: 308 My Photos 1999 Cherokee Year: 1999 Model: Cherokee Engine: 4.0 Transmission: AW4 Transfer Case: NP231 Front Axle: HP30 Rear Axle: 8.25" Tires: 33x12.50r15 Mastercraft Courser M/T Lift Specifications: 2" Tera Flex BB Misc Accessories: Needs more.	This is going to be insane! __________________ 1999 XJ Sport - 2" Tera-Flex BB, 33" Mastercraft M/T. Tons of plans, except more lift. 1986 MJ - Stock 2.8/904/Busted 228/9

02-08-2010, 06:55 PM	#120
qdw2008 Junior Member Join Date: Jan 2010 Posts: 73 My Photos	after searching every available reasorce there is but one word to explain this build: AWESOME!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bare Bones Wiring	East River XJ	Cherokee Tech	3	10-15-2009 06:25 PM
Bare Bumper Finish	blank87	Cherokee Tech	4	01-24-2009 04:46 PM