Jeep Builds Make your own jeep build thread here, discuss and view jeeps here. All Jeep models are welcome here.
Sponsored by:
Sponsored by:

Another Beater 91 XJ

Thread Tools
 
Search this Thread
 
Old 09-23-2016, 09:47 PM
  #16  
Newbie
 
Racinmason8's Avatar
 
Join Date: Sep 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Originally Posted by Scott'sXJ
Nooooooooo!
What you have is blow by. Not a huge deal if its a small quantity of oil, but could indicate a bigger problem down the line.
Install a catch can between the breather outlet and the air box. You can buy them, or for only a few bucks, you can make one. There are tons of videos on YouTube. Look it up and do that.
There's 2 reasons I say this.
1. It's cleaner for the trails and your car.
Blowing oil all over your frame is just messy.
2. It will give you an idea of how much oil you're actually using. And will let you know if the piston rings are just a little worn, or if its time for a rebuild.
I was sure it was blow by or cracked valve guide or something. it burns it decently quick, still has plenty of power for what im doing. Will look into the catch can
Old 09-23-2016, 10:00 PM
  #17  
Newbie
 
Racinmason8's Avatar
 
Join Date: Sep 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Probably build a catch can Monday night.
Old 09-26-2016, 08:13 AM
  #18  
Newbie
 
Racinmason8's Avatar
 
Join Date: Sep 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

I re-torqued the head and the rockers last night, PO replaced head gsaket and I wasnt sure if i trusted him or his tools. They were all under torqued. Torqued them to 110 ft lbs and the one that goes into the forward left one to 100ft lbs
Old 09-26-2016, 01:38 PM
  #19  
Newbie
 
Racinmason8's Avatar
 
Join Date: Sep 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Putting the doors on tonight, How hard are tube doors to build? What have you guys done for latches?
Old 09-26-2016, 04:17 PM
  #20  
CF Veteran
 
Scott'sXJ's Avatar
 
Join Date: Jun 2014
Location: Miami
Posts: 1,116
Likes: 0
Received 1 Like on 1 Post
Year: 90
Model: Cherokee
Engine: 4.0
Default

Originally Posted by Racinmason8
I re-torqued the head and the rockers last night, PO replaced head gsaket and I wasnt sure if i trusted him or his tools. They were all under torqued. Torqued them to 110 ft lbs and the one that goes into the forward left one to 100ft lbs
This may help your blow-by.


As for tube door latches, is it possible to use a spring loaded pin and just drill a striker hole on the B pillar?
I know there's a few threads in the fabrication section. You could try there if you're looking to make your own.
Old 09-27-2016, 07:33 AM
  #21  
Newbie
 
Racinmason8's Avatar
 
Join Date: Sep 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

I like that idea, I'll check it out, do it like the Pro armor RZR doors
Old 09-28-2016, 08:57 AM
  #22  
Newbie
 
Racinmason8's Avatar
 
Join Date: Sep 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Built the catch can and mounted my tool kit. What are you're guys essential trail gear?
Changed the oil too. Also started on the winch








Old 09-28-2016, 08:59 AM
  #23  
Newbie
 
Racinmason8's Avatar
 
Join Date: Sep 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default



Old 09-28-2016, 09:19 AM
  #24  
Senior Member
 
tinytrax78's Avatar
 
Join Date: Feb 2011
Location: orrville ohio
Posts: 822
Likes: 0
Received 3 Likes on 3 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Default

looks fun keep us posted on the budget
Old 09-28-2016, 11:46 AM
  #25  
Newbie
 
Racinmason8's Avatar
 
Join Date: Sep 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Originally Posted by tinytrax78
looks fun keep us posted on the budget
I have about 280 in it so far
Old 09-28-2016, 12:30 PM
  #26  
CF Veteran
 
HS00XJ's Avatar
 
Join Date: Apr 2012
Location: Ross Vegas, Ga
Posts: 1,843
Likes: 0
Received 2 Likes on 2 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 w/ tupy head
Default

Originally Posted by Racinmason8


is that an atv winch ? looks small
Old 09-29-2016, 08:20 AM
  #27  
Newbie
 
Racinmason8's Avatar
 
Join Date: Sep 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

5000lb utv winch. Will suffice with a ****** block
Old 09-30-2016, 07:32 AM
  #28  
Newbie
 
Racinmason8's Avatar
 
Join Date: Sep 2016
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Ive got a oil leak out the back of the valve cover
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
preep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-13-2016 07:09 PM
L1FT3DJ33P
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
09-13-2016 01:28 AM
XJdryva
MJ Comanche Tech. Stock & Modified.
3
09-12-2016 07:44 AM
DenimDean
XJ Cherokee Write-Ups
0
09-09-2016 03:53 PM
trev0006
Cherokee Chat
0
08-27-2016 12:16 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Another Beater 91 XJ



All times are GMT -5. The time now is 05:42 PM.