88 Xj mild to wild
#46
Senior Member
Join Date: Nov 2011
Location: shelley, idaho
Posts: 667
Likes: 0
Received 1 Like
on
1 Post
Year: 1988
Model: Cherokee
Engine: 242CID I-6
Not necessarily in 4wd but about 50% of the time it just makes a little clunk while accelerating or braking. Sometimes turning. But is my tcase supposed to wiggle some if I shake it? Cause I can move my rear drive shaft back and forth with all my strength and it moves the tcase. And sometimes when I do that I hear the clanking. But in the car it sounds like its in the rear.. idk its weird, iv googled it untill I was blue in the face and checked ujoints and all. Is there anyway the ujoints can be broken or worn out and look fine? Thanks guys. I'm going to an off road park Sunday and would really like to figure out what's going on
#47
CF Veteran
Thread Starter
Join Date: Feb 2013
Location: Justin, TEXAS
Posts: 1,802
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
That's what's weird, I can't swist my drive shaft one bit. Thanks for the reply! Do you know what holds the transfer case from wiggling like that? Cause my crossmember is good but I forgot to check the bolts on the holes of the crossmember. Could that cause it? Or void tranny or flex mounts cause that? Sorry for all the questions, iv googled just about everything and looked under the car for an hour
#48
Senior Member
Join Date: Nov 2011
Location: shelley, idaho
Posts: 667
Likes: 0
Received 1 Like
on
1 Post
Year: 1988
Model: Cherokee
Engine: 242CID I-6
That's what's weird, I can't swist my drive shaft one bit. Thanks for the reply! Do you know what holds the transfer case from wiggling like that? Cause my crossmember is good but I forgot to check the bolts on the holes of the crossmember. Could that cause it? Or void tranny or flex mounts cause that? Sorry for all the questions, iv googled just about everything and looked under the car for an hour
#50
Junior Member
Join Date: Oct 2012
Location: Sagle Idaho
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: Staright 6 High ouput
I would Suggest Looking into that..I was under my Jeep a few days ago trying to find the Clunking..My REar Shaft does not move with all my strengh.. But i can Move my Front shaft and It Cluncks. But i would look into that Wiggle cause that doesnt sound good!
#51
CF Veteran
Thread Starter
Join Date: Feb 2013
Location: Justin, TEXAS
Posts: 1,802
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
The tranny actually does not move with the tcase, I thought it did but it doesn't. But my tcase still wiggles some. I'm under my jeep now trying to figure it out. Thanks!
#53
CF Veteran
Thread Starter
Join Date: Feb 2013
Location: Justin, TEXAS
Posts: 1,802
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
Motor mounts are bad but if something's broke, upgrade! Brown dog motor mounts will be ordered when I get paid!
My snorkel also came today! Super exited to get it on, but the cheap Chinese knock off I bought diddnt cone with instructions so I might have to improvise a bit...haha
My snorkel also came today! Super exited to get it on, but the cheap Chinese knock off I bought diddnt cone with instructions so I might have to improvise a bit...haha
#54
CF Veteran
Thread Starter
Join Date: Feb 2013
Location: Justin, TEXAS
Posts: 1,802
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
Took a trip to Brazos valley off road ranch this weekend! 3 hour drive both ways for me but it was so worth it! My heep performed way over my expectations and I pushed it to its limits and dnt even break anything! I need to trim my feders cause I was rubbing terribly in a snake run kinda thing. My jeep climbed like a champ and pulled me up whatever I threw at it! Even with 5 people in the car! Haha ill get pics uploaded asap
#57
CF Veteran
Thread Starter
Join Date: Feb 2013
Location: Justin, TEXAS
Posts: 1,802
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
Haven't updated in a while
I had a terible idle so I replaced adjusted tps, that helped. O2 sensor replaced helped as well. Then it started dying so I replaced cps, I dropped a socket in my bell housing while doing that, boy did that suck to get out.
Replaced distributor, rotor, cap, wires, plugs, pressure tank, tranny mount, and diff fluid
I had a terible idle so I replaced adjusted tps, that helped. O2 sensor replaced helped as well. Then it started dying so I replaced cps, I dropped a socket in my bell housing while doing that, boy did that suck to get out.
Replaced distributor, rotor, cap, wires, plugs, pressure tank, tranny mount, and diff fluid
#60
CF Veteran
Thread Starter
Join Date: Feb 2013
Location: Justin, TEXAS
Posts: 1,802
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
Lots of work done on the xj!
Oil pan gasket
Then the jack folded underneath my axle when I was jacking it up to relocate stands, one of them went through the floor pan
U joints
Wheel bearing
Fire extinguisher
Water pump and thermostat
I assumed my radiator had never been changed so I replaced it, look what I found on the bottom
Oil pan gasket
Then the jack folded underneath my axle when I was jacking it up to relocate stands, one of them went through the floor pan
U joints
Wheel bearing
Fire extinguisher
Water pump and thermostat
I assumed my radiator had never been changed so I replaced it, look what I found on the bottom
Last edited by 884x4; 05-28-2013 at 11:04 PM.