2001 XJ from Orange County
#155
Seasoned Member
Thread Starter
Join Date: Jul 2012
Location: Orange County,Ca
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: HO 4.0
#157
Seasoned Member
Thread Starter
Join Date: Jul 2012
Location: Orange County,Ca
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: HO 4.0
#159
Seasoned Member
Thread Starter
Join Date: Jul 2012
Location: Orange County,Ca
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: HO 4.0
Its a Radio shack job box cut down on a table saw. Then its a six switch carling face plate. I then cut a hole in job box to fit face plate. Originally I had it screwed down that was a mistake, it is held down with velcro that when when you work on switches or console it can be removed. It does not move around between the velcro and being tight to the console.
#161
CF Veteran
Join Date: May 2011
Location: va
Posts: 2,516
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1996
Model: Cherokee
Engine: i-6 4.0
Its a Radio shack job box cut down on a table saw. Then its a six switch carling face plate. I then cut a hole in job box to fit face plate. Originally I had it screwed down that was a mistake, it is held down with velcro that when when you work on switches or console it can be removed. It does not move around between the velcro and being tight to the console.
#162
CF Veteran
Join Date: Nov 2011
Location: Nashville
Posts: 2,752
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Nice Build. Have a 01 as well and have spent the last year building it up. Haven't had the chance to take it out yet but looking forward to it real soon.
#163
CF Veteran
Join Date: Aug 2010
Location: Fountain Inn, SC
Posts: 1,085
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1988
Model: Comanche (MJ)
Engine: I6 4.0L
Its a Radio shack job box cut down on a table saw. Then its a six switch carling face plate. I then cut a hole in job box to fit face plate. Originally I had it screwed down that was a mistake, it is held down with velcro that when when you work on switches or console it can be removed. It does not move around between the velcro and being tight to the console.
#164
Seasoned Member
Thread Starter
Join Date: Jul 2012
Location: Orange County,Ca
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: HO 4.0
#165
Seasoned Member
Thread Starter
Join Date: Jul 2012
Location: Orange County,Ca
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: HO 4.0
Diff Covers and Alloy axels
Got my 1500 mile diff fluid changed and installed Ruffstuff diff covers. And while it was apart had chromoly "Alloy USA" rear axles installed.
Last edited by camping350; 01-13-2013 at 07:10 PM.