ccooper1234

Installed underhood electric fan. Should lower the underhood temperature

hellmouth19d

How has that been working out for you?

ccooper1234

Who knows who drives the older lifted dull blue Cherokee? He was racing down 17

KaJohnson

Sky blue, 31s, about a 3in lift?

northline76

Trying to get my hands on another front driveshaft so I can finally do my hack and tap. Not really looking to spend more than 25 bucks on it, seeing how im gona turn around and have it fully rebuilt and balanced. If anybody knows where one might be please let me know. Probably try pick and pull later in the week If I cant find one.

SteveMongr

'Fully' rebuilt by a shop costs a lot. A brand new one made to your specs will be $225 delivered.
There are numerous salvage yards in Tidewater area also. Maybe check craigslist for a 'part-out' Jeep too.

northline76

Fully rebuilt is about 180, I've already had the front done. Haven't looked into the brand new built ones yet, any recommendations? Been hitting up craigslist but people way overvalue stuff. Had a guy tell me he wouldn't take less then 100 for his used 91 front.

SteveMongr

When I did the Hack-n-tap, used my own front driveshaft for the rear until I got another.
I used Tatton's driveshafts on one Jeep. They are heavier and heavy duty. Call him for the best price. http://www.ebay.com/itm/NEW-JEEP-1310-CV-DRIVESHAFT-CARDONE-CJ-TJ-YJ-XJ-SYE-CHEROKEE-WRANGLER-DRIVELINE-/330774155483?pt=Motors_Car_Truck_Parts_Accessories&hash=item4d03ad10db&vxp=mtr
For a daily driver I might prefer the stock style shaft like this one;
http://www.ebay.com/itm/1310-CV-Driveshaft-SPICER-U-joints-Full-Spline-Wrangler-Cherokee-TJ-XJ-YJ-LJ-/161386839605?pt=Motors_Car_Truck_Parts_Accessories&hash=item259367be35&vxp=mtr
And one more
http://www.ebay.com/itm/JEEP-WRANGLER-CHEROKEE-ROCK-CRAWLER-1310-CV-DRIVESHAFT-XJ-CJ-YJ-TJ-LJ-SYE-SHAFT-/321155813713?pt=Motors_Car_Truck_Parts_Accessories&hash=item4ac660d151&vxp=mtr

SteveMongr

This shaft also looks good.
http://www.ebay.com/itm/Spicer-1310-CV-Drive-Shaft-for-XJ-Automatic-Trans-with-SYE-/181307442817?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a36c40681

KaJohnson

Does anybody near the Smithfield area have a non abs brake proportioning valve for an 89?

northline76

Who on here was building the metal center console brackets?

SteveMongr

ccooper1234
Link in his signature, post 1983

ccooper1234

Anyone here a member of 757 Jeepers?

Hopkins

I've met a couple of them when they were at a No BS meetup. But nope, not a member. They do seem to have a lot of meet ups tho

Red82

Are they on meetup.com? I've never heard of 757 Jeepers. There's a new group called like southside jeepers or something like that.