Desertfox1023

Any one down for a Uwharrie Run on either Saturday (8/30) or Monday (9/1)?

adamk

I would love to but I'm going to be in Maryland. Ill be back the 31st so maybe a day run on the 1st but its stretching it for me.

Desertfox1023

OK, well if you get back on the 31st maybe well just do a Wrench Day / Cookout at my house.

I'll take another $25 bucks off that OTK Steering Plus Free Food & Beer.

adamk

For once I don't have much to do haha. Only thing that needs to be done is the valve cover gasket. But, I'm sure my driveshafts could use a rebuild haha. I'll get in touch with ya as we get closer

Desertfox1023

Sounds good, I want my D44 in and done... The Front is a much bigger under taking than the rear was that's for sure.

adamk

Whats left for the 44?

Desertfox1023

First I got to Pull the D30 Out & Bolt in the IRO cross member.

Then I can mock up the D44 so I can measure for the length of the radius arms.
Also for where I need to put the Shock tabs on the arms.

The Track Bar I'm hoping to swap out the bushings on my RE D30 bar for the one on the D44 right now.

The Steering will bolt right up.

The Brakes hoses should bolt to the Ford Calipers from what I understand.

That's all there is to it...


I'm going to deal with the Swaybar & Steering Stabilizer after it is sitting on it's on weight....