Any Georgians?
#1
Member
Thread Starter
Join Date: Jan 2010
Location: Winder
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Year: 91
Model: Cherokee
Engine: I6
Any Georgians?
My name is Scott and I own a 91XJ....lifted locked and sticked. Anybody on here around the N.E. area?
Last edited by safish; 01-03-2010 at 08:45 PM.
Trending Topics
#10
Newbie
Join Date: Jan 2010
Location: Monticello Ga.
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
It has an electrical/fuel problem?
Ive checked all sensors and grounds but it still wont Idle or run long?It was running great one minute and before I could pull it out of the garage it stumbled and died...
Exhaust smells really rich so Im lost.
Ive checked all sensors and grounds but it still wont Idle or run long?It was running great one minute and before I could pull it out of the garage it stumbled and died...
Exhaust smells really rich so Im lost.
#13
Newbie
Join Date: Jan 2010
Location: Monticello Ga.
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
Ive checked the plug wires,I can get it to run long enough to check the timing,with a timing light..Idling one minute then dead the next weirdest thing Ive seen...I need a scanner I guess to scan codes.
#14
Member
Thread Starter
Join Date: Jan 2010
Location: Winder
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Year: 91
Model: Cherokee
Engine: I6
Ok, well first thing ya need to check is the fuel filter and make sure its not just starved for fuel. We definatley have to get u up and running....
As far as places to ride, well there is Beasley, up in Blairesville, River Rock in Milidgeville, of course Durahmtown, (wich I'm riding on Feb.13th), then u have to go over to Alabama and ya got Mountainside & Morris Mountain, Both are great places to spend the day...
BTW, If nobody has a winch, may I suggest getting one...Smittybuilt winchs are priced at about 350.00 for an 8000 lb one....I've owned them and they are awsome....
Still working on my 4-Link and just fished,(I hope), all my brackets...hope to be measuring the length of my control arms in the next day or so. I would like to get all the arms mounted this weekend...
Ya'll be good and stay safe!
As far as places to ride, well there is Beasley, up in Blairesville, River Rock in Milidgeville, of course Durahmtown, (wich I'm riding on Feb.13th), then u have to go over to Alabama and ya got Mountainside & Morris Mountain, Both are great places to spend the day...
BTW, If nobody has a winch, may I suggest getting one...Smittybuilt winchs are priced at about 350.00 for an 8000 lb one....I've owned them and they are awsome....
Still working on my 4-Link and just fished,(I hope), all my brackets...hope to be measuring the length of my control arms in the next day or so. I would like to get all the arms mounted this weekend...
Ya'll be good and stay safe!
#15
Senior Member
Join Date: Jan 2010
Location: LARRYVILLE
Posts: 602
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Ok, well first thing ya need to check is the fuel filter and make sure its not just starved for fuel. We definatley have to get u up and running....
As far as places to ride, well there is Beasley, up in Blairesville, River Rock in Milidgeville, of course Durahmtown, (wich I'm riding on Feb.13th), then u have to go over to Alabama and ya got Mountainside & Morris Mountain, Both are great places to spend the day...
BTW, If nobody has a winch, may I suggest getting one...Smittybuilt winchs are priced at about 350.00 for an 8000 lb one....I've owned them and they are awsome....
Still working on my 4-Link and just fished,(I hope), all my brackets...hope to be measuring the length of my control arms in the next day or so. I would like to get all the arms mounted this weekend...
Ya'll be good and stay safe!
As far as places to ride, well there is Beasley, up in Blairesville, River Rock in Milidgeville, of course Durahmtown, (wich I'm riding on Feb.13th), then u have to go over to Alabama and ya got Mountainside & Morris Mountain, Both are great places to spend the day...
BTW, If nobody has a winch, may I suggest getting one...Smittybuilt winchs are priced at about 350.00 for an 8000 lb one....I've owned them and they are awsome....
Still working on my 4-Link and just fished,(I hope), all my brackets...hope to be measuring the length of my control arms in the next day or so. I would like to get all the arms mounted this weekend...
Ya'll be good and stay safe!
Good Info
I would definately be interested in goin to durhamtown. Keep me updated.