San Antonio XJ's
#2852
#2855
Anybody gone mudding lately since its rained? I've went to go checkout a few spots I've come across and since its rain I've had a blast! Would definitely love some other XJs to join none of my friends have trucks to come along with me!!!
#2856
Seasoned Member
Join Date: Dec 2013
Location: SATX
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
Been to a couple unofficial spots but nothing too deep. Wouldn't mind hitting up some mud but tomorrow might be driving up to San Marcos for a purchase.
#2859
Member
Join Date: Jan 2011
Location: Texas
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I'd love to join you guys, but I'm parked for the time being. I have some serious front end work to do and finish up a brake conversion.
Does anyone here have experience taking the smile out of the Dana 30 axle? I'm thinking that a 20 ton jack, chain and BFH should do the trick. Afterwards I plan to weld on gussets and a truss to keep it straight.
Does anyone here have experience taking the smile out of the Dana 30 axle? I'm thinking that a 20 ton jack, chain and BFH should do the trick. Afterwards I plan to weld on gussets and a truss to keep it straight.
#2861
Seasoned Member
Join Date: Dec 2013
Location: SATX
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
#2862
CF Veteran
Thread Starter
Join Date: Jan 2011
Location: Converse, Texas
Posts: 1,651
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
I'd love to join you guys, but I'm parked for the time being. I have some serious front end work to do and finish up a brake conversion.
Does anyone here have experience taking the smile out of the Dana 30 axle? I'm thinking that a 20 ton jack, chain and BFH should do the trick. Afterwards I plan to weld on gussets and a truss to keep it straight.
Does anyone here have experience taking the smile out of the Dana 30 axle? I'm thinking that a 20 ton jack, chain and BFH should do the trick. Afterwards I plan to weld on gussets and a truss to keep it straight.
#2863
Newbie
Join Date: Feb 2014
Location: San Antonio
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I havent been on here for quite awhile. Now that i have a truck it tends to take most the time, and funds. But i did stumble upon a few things i have left over from the jeep. The 6.5" Rusty's coil springs, 6" rear leafs, and the front axle. (full chromoly, no locker)
If anyone has a use for any of this let me know, id be more than willing to pass it on for cheap. You can text me at 210-251-1116
Couple pictures of my current ride.
If anyone has a use for any of this let me know, id be more than willing to pass it on for cheap. You can text me at 210-251-1116
Couple pictures of my current ride.
#2865
CF Veteran
Join Date: May 2009
Location: Glen Burnie, MD
Posts: 1,844
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
Hey guys, sry I have been gone for a while, and my Jeep was busted. But now I'm back and the Jeep works again (as of today actually). I was wondering if any of you guys were going to the Jeep Nation meetup at Bob's Burgers this Saturday 06 Nov 2015? I will be attending and introducing myself. Hoping to get back into the wheelin scene real soon.
If you are interested, The meeting is at 5-9pm tomorrow and here is the location:
https://www.google.com/maps?bav=on.2...IVTOomCh1OPAOf
It is the one located at the top of the 1604
Hope to meet some of you guys there.
If you are interested, The meeting is at 5-9pm tomorrow and here is the location:
https://www.google.com/maps?bav=on.2...IVTOomCh1OPAOf
It is the one located at the top of the 1604
Hope to meet some of you guys there.
Last edited by trans_am7935; 11-06-2015 at 04:58 PM.