San Antonio XJ's
#2901
CF Veteran
Join Date: May 2009
Location: Glen Burnie, MD
Posts: 1,844
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
Then maybe I could get some wheelin in.
Here is an old picture of when I was doing my heads and cam swap on my T/A
Table of stuff
Head and cam complete!
Last edited by trans_am7935; 05-20-2016 at 11:52 AM.
#2902
CF Veteran
Join Date: Jul 2012
Location: San Antonio, TX
Posts: 4,104
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L
Dude, I have owned LSX cars for the last 10 years and an XJ for the last 13 years. I currently have 2 F-body cars in my driveway right now, with one that hardly ever sees daylight. I would definitely be able to lend you a hand, and on the side contemplate my own LSX swap into y own XJ. I just haven't had the time or the wife approval so I just put it on the side. I even thought about going turbo as it is alot easier and the lazy way out.
Then maybe I could get some wheelin in.
Here is an old picture of when I was doing my heads and cam swap on my T/A
Table of stuff
Head and cam complete!
Then maybe I could get some wheelin in.
Here is an old picture of when I was doing my heads and cam swap on my T/A
Table of stuff
Head and cam complete!
i have plans to eventually bump the 5.3 up to about 450hp N/A with a full rebuild, but that'll happen after i do some sort of axle swap.
your all welcome to come lend a hand im hoping to start yanking the 4.0 in a couple weeks
#2903
Seasoned Member
Join Date: Dec 2013
Location: SATX
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
What are the details on that 4.0?
#2905
CF Veteran
Join Date: May 2009
Location: Glen Burnie, MD
Posts: 1,844
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
Well decided after the recent rain, and the coming rain in a few days I would get some wheeling in behind the Walmart, as that is the best place around here. Well I had a good time, only got stuck once. By myself I might add, with no decent tree to winch off in site. SO it took me about an hour to get out. I killed a tree in the process but didnt take a pic of it as I felt bad for it. Eventually got out, and made it home only to notice my steering was way off on the way home, found the carnage in the last picture.
Going though the mudhole under the towers, it was alot deeper then I thought.
This was my favorite picture of the day, as the still water makes it look like my entire tire is there.
Some guys lost the bed in his truck!
This is where I got stuck, off to the right on the main path, the first mud pit. The center was angled just right for my front and rear tires to touch them, and stuck.
Tried to pull cable the first time, with no avail. I was working against myself trying to climb that wall on my left with a small tree, only an 8k lb winch, and no traction. I ended up ripping that tree out of the ground. Then i found a different multi tree that I used, and my cable was not long enough, so I used a strap as well. It was long shot, and my winch was not happy, but I was able to pull myself out.
Here is the "tree" I was using to pull myself out It doesn't look happy.
I'm FREE!!!!!!!!!!!!!!!!!!! wound up the winch and started on my way home...but something just wasnt right.
CARNAGE!!!!! This is a Rusty's HD track bar, and I bent it. Probobly from pulling myself out sideways. It happens, that is what a Lifetime Warranty is for!
Going though the mudhole under the towers, it was alot deeper then I thought.
This was my favorite picture of the day, as the still water makes it look like my entire tire is there.
Some guys lost the bed in his truck!
This is where I got stuck, off to the right on the main path, the first mud pit. The center was angled just right for my front and rear tires to touch them, and stuck.
Tried to pull cable the first time, with no avail. I was working against myself trying to climb that wall on my left with a small tree, only an 8k lb winch, and no traction. I ended up ripping that tree out of the ground. Then i found a different multi tree that I used, and my cable was not long enough, so I used a strap as well. It was long shot, and my winch was not happy, but I was able to pull myself out.
Here is the "tree" I was using to pull myself out It doesn't look happy.
I'm FREE!!!!!!!!!!!!!!!!!!! wound up the winch and started on my way home...but something just wasnt right.
CARNAGE!!!!! This is a Rusty's HD track bar, and I bent it. Probobly from pulling myself out sideways. It happens, that is what a Lifetime Warranty is for!
#2908
CF Veteran
Join Date: May 2009
Location: Glen Burnie, MD
Posts: 1,844
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
#2909
I called up Rusty's and they are gonna send me a new one no charge. The only wanted to know how I did it out of curiosity and to see if they had a defect in the part. I told them it was probobly from when I winched myself out sideways.... I just flipped it over and all is good now, drives strait as much as a lifted Jeep can drive strait!
#2910
CF Veteran
Thread Starter
Join Date: Jan 2011
Location: Converse, Texas
Posts: 1,651
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
So how was everyone's 4th? My brother put a slo-mo of my custom stuff on instagram- https://www.instagram.com/p/BHdv5lXj...hnnytwos&hl=en