Off-Road Shops in OKC?
03-21-2010, 12:56 PM
#1
Member
Thread Starter
Join Date: Dec 2009
Location: Edmond,OK
Posts: 117
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Cherokee
Engine: 4.0L
Off-Road Shops in OKC?
I have a lifted jeep that i wrecked a while back and am looking to get the lift switched over to my other jeep that isn't lifted. Does anyone have any knowledge of a shop that can switch the suspension and front axle from the lifted one to the not lifted one? The lifted jeep is in southern oklahoma (Ardmore) so if anyone knows of a shop in that area it would be better.
03-21-2010, 01:28 PM
#2
::CF Administrator::
Join Date: May 2008
Location: Okc area
Posts: 10,039
Likes: 0
Received 15 Likes
on
11 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Just about any shop and swap the parts ie mechanic. There is a place off I40 and Meridian you can see from the highway. There is also 4 wheel parts off I35 and 12th Street in Moore. Both are going to be expensive to do. Why not do it yourself?
03-21-2010, 05:31 PM
#3
Member
Thread Starter
Join Date: Dec 2009
Location: Edmond,OK
Posts: 117
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Cherokee
Engine: 4.0L
Because i don't have a shop and it's to cold out and i have to get this done this week or weekend. But if you or someone has a shop to do it i would be willing to get it done but my suspension knowledge is slim to none.
03-21-2010, 08:22 PM
#4
::CF Administrator::
Join Date: May 2008
Location: Okc area
Posts: 10,039
Likes: 0
Received 15 Likes
on
11 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6
I wish I had a shop...I do all my stuff in the driveway or garage but yeah it cold as snot. If you know a good mechanic they may do it for you. Offroad shops cost a small fortune. I don't know of any shops up in Edmond though.
03-24-2010, 04:39 PM
#5
CF Veteran
If I can't do it I typically take my stuff to Christian Brothers Auto off Santa Fe just south of Danforth. However, I do believe it is going to cost you quite a bit regardless of what shop you take it too... I don't have a shop... or garage...or concrete driveway for that matter. So I understand the cold problem, I also have a rain/snow problem too..
It sucks, but I plan on doing a complete frame swap on my 82 Chevy at somepoint.. going to be interesting.
It sucks, but I plan on doing a complete frame swap on my 82 Chevy at somepoint.. going to be interesting.
04-07-2010, 11:46 AM
#7
Member
Thread Starter
Join Date: Dec 2009
Location: Edmond,OK
Posts: 117
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Cherokee
Engine: 4.0L
Yea i already found someone in my hometown to change everything over for me for a really good price so it's getting done already. Thanks for the offer anyway.
Trending Topics
04-08-2010, 08:32 PM
#8
Member
Join Date: Apr 2010
Location: OKC
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
04-09-2010, 04:43 PM
#9
Member
Thread Starter
Join Date: Dec 2009
Location: Edmond,OK
Posts: 117
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Cherokee
Engine: 4.0L
Yea i hope so i will know in a week or two just depends on how soon he will get to it. I am excited cause i will have a good motor, lift, and four wheel drive again.
05-10-2010, 10:34 AM
#10
Junior Member
Join Date: Mar 2010
Location: Guthrie, OK
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Just on a future note, if you know someone with access to tinker and "ahem" can buy them beer and food "ahem" then you have access to a fully stocked DIY shop with lifts.
Just sayin'
Just sayin'
05-10-2010, 07:35 PM
#11
Member
Join Date: Apr 2010
Location: OKC
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Thread
Thread Starter
Forum
Replies
Last Post
Austindude2015
Cherokee Chat
17
12-28-2020 05:12 PM
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
12-11-2015 11:09 AM
Lightning_19k
Modified XJ Cherokee Tech
14
10-03-2015 09:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)