xj 4-play

Yeah, its the output seal for the yoke. Its a RR / omix variant. Can't remember the actual box, which is usually the only difference. The seal was already installed and worked for a while before it started leaking. I used to commute to SF every day so i put some miles on it.

hbracing13

Yes mine leaks from the seal too there is a replacement seal that you buy at orielys so like 10 bucks and is a better seal more and hugs the shaft better almost like.........

xj 4-play

Yeah i oredered the replacement seal, but heard it'll leak again. What was the pn you found at O'Reillys. So you can just pip it out without opening it up.

xj 4-play

Amc20?

hbracing13

Yup amc 20 or dana 35 pinion seal. I had to replace my pinion nut as that one got destroyed when taking off the yoke.
Napa # nos 18472. I'll probably upgrade this seal as well when it gets worse. But I did notice something while I was waiting for my new yoke I used another input yoke from a tcase and the seal was a lot tighter on that yoke compared to the RR one.

xj 4-play

Good to know, I already destroyed one yoke and had to replace it once. I'm guessing that's why the seal gave out.

xj 4-play

I've had to get my tom woods driveshaft rebuilt twice. Angles are good they just require a lot of grease and I used to put a lot if miles on the old gal. Can't complain too much about the original seal for this reason.

lonewolf53

Hey guys, since my jeep was stolen a few months back there was no luck in me getting it back so I found a couple things sitting around for it I can get rid of, do any of you want a free microgard oil filter? And I'll be selling my all steel bumper with reciever hitch and two welded in tie down points,it connects to stock rear bumper bolts but should be modified to wrap into the frame, selling for 50 bucks to you guys if you're interested. I'll send pics if you want to see

PurpleToxin505

Dude that sucks! Send me some pics of the bumper, I may be interested 5053061721

xj 4-play

Sorry to hear it. I definitely know how that feels. You never know, they may find it a few months later like they did mine.

lonewolf53

That would be nice, in time I'll get another though. In the mean time I have a new to me '06 ford fusion that gets me around. Still getting used to not being able to pop curbs and not worrying about scratched paint

hbracing13

More pics less talky. I'll sell you another jeep that been sitting here at the house.

lonewolf53

I think you saw it while it was still on my old xj, does need to be modified though. These are old pictures I'll get better ones when I go to Los lunas next

hbracing13

I remember it somewhat, hut don't recall ot having the shackles or the hitch part.

lonewolf53

yeah before my xj got stolen I was going to be modifying it to wrap into the frame and cut the back side of the box tube out to make it lighter and make the receiver more flush and low profile, but never got around to it. maybe if you guys dont want it ill keep and and modify for my next xj whenever i get it