Need help in Colorado Springs

Vguy · 08-28-2009, 10:36 PM

Hi folks...need some advice/help here if possible. My son just drove his 95 XJ from Socal to school in Colorado Springs. I think the long drive put the 177k Jeep to the test and now he seems to have a noise coming from the left front area of the car. He took it to a local shop and they said they thought the rotors/brakes needed to be redone (rotors were replaced in 2006), the front bearings might be shot, etc. etc. They didn't charge him for the diagnosis and they are putting together a "worst case" scenario quote, but I'm wondering if there are any solid shops or shade-tree XJ mechanics in the area that could help him out.
I do most of the work at home with him and we just replaced his ignition module, fluids, ignition wires etc. and cleaned up his NSS switch etc. but this is a new one and he doesn't have the tools or the facilities (or experience yet) to do this type of stuff on his own.
Anyone know of any person or place that could help him out...a school/Junior college program, a good local guy/gal etc., to keep his costs to a minimum and help him learn how to do it more himself? Thanks for any advice you guys can share..it's appreciated!

FrankZ · 08-28-2009, 11:15 PM

PM Sent

COSXJFAN · 08-29-2009, 12:41 AM

Let me know if I can help in any way...

FrankZ · 08-29-2009, 08:21 PM

He's going to bring it by here tomorrow evening.

COSXJFAN · 08-29-2009, 10:33 PM

Would another set of hands help?

FrankZ · 08-29-2009, 11:59 PM

I think we'll be okay. Sounds like a brake job and maybe a balljoint.

Vguy · 08-30-2009, 10:23 AM

Thanks for taking a look and offering to help out. The mechanic he spoke with thought he heard some bearing noise, but I know nothing about the shop or what their ethics are when dealing with the a younger customer. I'm hoping it's an easy fix (and so is CJ...LOL)

FrankZ · 08-30-2009, 10:37 AM

I'm sure he'll give you a shout when we get a chance take a look and see what it needs.

FrankZ · 08-30-2009, 08:47 PM

All done. A new set of pads, rotated the tires. The TRE at the pitman arm has a little play but not too bad. I told your son to keep an eye on it and gimme a call when he's ready to replace it and I'll help him out.

okcjeeper · 08-30-2009, 09:15 PM

I gotta say Frank that was pretty cool of you to help out. I give you a big kuddos for reaching out to a fellow jeeper like that.

FrankZ · 08-30-2009, 09:35 PM

We all need a hand once in a while. A few minutes worth of wrenchin' doesn't cost anyone anything.

Vguy · 08-30-2009, 11:10 PM

Quote:

Originally Posted by FrankZ

We all need a hand once in a while. A few minutes worth of wrenchin' doesn't cost anyone anything.

I appreciate the help more than you can know. Cj's my oldest of four and the first one to leave the house and it was nice to see someone willing to reach out and help a stranger. I'm an asst. principal of a middle school and a coach etc. and I've always made it a point to tell my kids that helping others is the best feeling in the world and makes the world the great place it can be, and you helped to prove that to him. He was very impressed by your knowledge, willingness to help, your family, and your general helpful nature....and so was I. I really appreciate your letting him do the work and learn something more more about his Jeep and how to work on it and I know that this will be one of those lessons that will help him (and me) to remember to pass it on. Thanks for being one of the good guys.

FrankZ · 08-30-2009, 11:23 PM

Thank you.

COSXJFAN · 08-31-2009, 08:05 AM

Glad it all went well!! Nice work Frank!!

08-28-2009, 10:36 PM	#1
Vguy Newbie Join Date: Aug 2009 Posts: 3 My Photos	Need help in Colorado Springs Hi folks...need some advice/help here if possible. My son just drove his 95 XJ from Socal to school in Colorado Springs. I think the long drive put the 177k Jeep to the test and now he seems to have a noise coming from the left front area of the car. He took it to a local shop and they said they thought the rotors/brakes needed to be redone (rotors were replaced in 2006), the front bearings might be shot, etc. etc. They didn't charge him for the diagnosis and they are putting together a "worst case" scenario quote, but I'm wondering if there are any solid shops or shade-tree XJ mechanics in the area that could help him out. I do most of the work at home with him and we just replaced his ignition module, fluids, ignition wires etc. and cleaned up his NSS switch etc. but this is a new one and he doesn't have the tools or the facilities (or experience yet) to do this type of stuff on his own. Anyone know of any person or place that could help him out...a school/Junior college program, a good local guy/gal etc., to keep his costs to a minimum and help him learn how to do it more himself? Thanks for any advice you guys can share..it's appreciated!

08-28-2009, 11:15 PM	#2
FrankZ Cherokee Forum Vendor Join Date: Apr 2008 Location: Colorado Springs Posts: 2,566 My Photos 1997 Cherokee Year: 1997 Model: Cherokee Engine: 4.6L Stoker Transmission: AW4 Transfer Case: NP231J Front Axle: Narrowed HP Dana44 Rear Axle: Dana44 Tires: 35x12.5x15 Lift Specifications: about 5.5" w/ DIY Long ArmZ Misc Accessories: OBA, Bunch of DIY stuff	PM Sent __________________ 9/11 - WE WILL NEVER FORGET!! (<---<< click)

08-29-2009, 12:41 AM	#3
COSXJFAN BROWN CHICKEN, BROWN COW! Join Date: Apr 2008 Location: Colorado Springs Posts: 5,780 My Photos 1987 Wagokee Year: 1987 Wagokee Engine: 4.0 Renny Transmission: AW-4 Transfer Case: NP 242 HD drive shaft Front Axle: HP non-C.A.D. Dana 30 w/ 4.88s (locked) Rear Axle: Dana 44 w/ 4.88s (locked) Tires: 33X12.5-15 Pro Comp MTs Lift Specifications: Hodgepodge 6.5 front 5.5 rear Misc Accessories: custom 2.5" exhaust, cold air intake, homebrew bumpers & armor, winch	Let me know if I can help in any way... __________________ STEELER FAN TIL DEATH!!! BAN OWNERS, NOT BREEDS!!! AMERICAN PIT BULL TERRIERS ARE GREAT PETS!!!

08-29-2009, 08:21 PM	#4
FrankZ Cherokee Forum Vendor Join Date: Apr 2008 Location: Colorado Springs Posts: 2,566 My Photos 1997 Cherokee Year: 1997 Model: Cherokee Engine: 4.6L Stoker Transmission: AW4 Transfer Case: NP231J Front Axle: Narrowed HP Dana44 Rear Axle: Dana44 Tires: 35x12.5x15 Lift Specifications: about 5.5" w/ DIY Long ArmZ Misc Accessories: OBA, Bunch of DIY stuff	He's going to bring it by here tomorrow evening. __________________ 9/11 - WE WILL NEVER FORGET!! (<---<< click)

08-29-2009, 10:33 PM	#5
COSXJFAN BROWN CHICKEN, BROWN COW! Join Date: Apr 2008 Location: Colorado Springs Posts: 5,780 My Photos 1987 Wagokee Year: 1987 Wagokee Engine: 4.0 Renny Transmission: AW-4 Transfer Case: NP 242 HD drive shaft Front Axle: HP non-C.A.D. Dana 30 w/ 4.88s (locked) Rear Axle: Dana 44 w/ 4.88s (locked) Tires: 33X12.5-15 Pro Comp MTs Lift Specifications: Hodgepodge 6.5 front 5.5 rear Misc Accessories: custom 2.5" exhaust, cold air intake, homebrew bumpers & armor, winch	Would another set of hands help? __________________ STEELER FAN TIL DEATH!!! BAN OWNERS, NOT BREEDS!!! AMERICAN PIT BULL TERRIERS ARE GREAT PETS!!!

08-29-2009, 11:59 PM	#6
FrankZ Cherokee Forum Vendor Join Date: Apr 2008 Location: Colorado Springs Posts: 2,566 My Photos 1997 Cherokee Year: 1997 Model: Cherokee Engine: 4.6L Stoker Transmission: AW4 Transfer Case: NP231J Front Axle: Narrowed HP Dana44 Rear Axle: Dana44 Tires: 35x12.5x15 Lift Specifications: about 5.5" w/ DIY Long ArmZ Misc Accessories: OBA, Bunch of DIY stuff	I think we'll be okay. Sounds like a brake job and maybe a balljoint. __________________ 9/11 - WE WILL NEVER FORGET!! (<---<< click)

08-30-2009, 10:23 AM	#7
Vguy Newbie Join Date: Aug 2009 Posts: 3 My Photos	Thanks for taking a look and offering to help out. The mechanic he spoke with thought he heard some bearing noise, but I know nothing about the shop or what their ethics are when dealing with the a younger customer. I'm hoping it's an easy fix (and so is CJ...LOL)

08-30-2009, 10:37 AM	#8
FrankZ Cherokee Forum Vendor Join Date: Apr 2008 Location: Colorado Springs Posts: 2,566 My Photos 1997 Cherokee Year: 1997 Model: Cherokee Engine: 4.6L Stoker Transmission: AW4 Transfer Case: NP231J Front Axle: Narrowed HP Dana44 Rear Axle: Dana44 Tires: 35x12.5x15 Lift Specifications: about 5.5" w/ DIY Long ArmZ Misc Accessories: OBA, Bunch of DIY stuff	I'm sure he'll give you a shout when we get a chance take a look and see what it needs. __________________ 9/11 - WE WILL NEVER FORGET!! (<---<< click)

08-30-2009, 08:47 PM	#9
FrankZ Cherokee Forum Vendor Join Date: Apr 2008 Location: Colorado Springs Posts: 2,566 My Photos 1997 Cherokee Year: 1997 Model: Cherokee Engine: 4.6L Stoker Transmission: AW4 Transfer Case: NP231J Front Axle: Narrowed HP Dana44 Rear Axle: Dana44 Tires: 35x12.5x15 Lift Specifications: about 5.5" w/ DIY Long ArmZ Misc Accessories: OBA, Bunch of DIY stuff	All done. A new set of pads, rotated the tires. The TRE at the pitman arm has a little play but not too bad. I told your son to keep an eye on it and gimme a call when he's ready to replace it and I'll help him out. __________________ 9/11 - WE WILL NEVER FORGET!! (<---<< click)

08-30-2009, 09:15 PM	#10
okcjeeper ::CF Administrator:: Join Date: May 2008 Location: Okc area Posts: 5,777 My Photos 1991 Cherokee Year: 1991 Model: Cherokee Engine: 4.0 I6 Transmission: AW4 Transfer Case: NP242 Front Axle: D30 Rear Axle: D35 Tires: Treadwright MT-G 31x10.50 Lift Specifications: RE 3.5	I gotta say Frank that was pretty cool of you to help out. I give you a big kuddos for reaching out to a fellow jeeper like that. __________________ I will no longer answer tech questions via PM's http://www.oklahomahunter.net

08-30-2009, 09:35 PM	#11
FrankZ Cherokee Forum Vendor Join Date: Apr 2008 Location: Colorado Springs Posts: 2,566 My Photos 1997 Cherokee Year: 1997 Model: Cherokee Engine: 4.6L Stoker Transmission: AW4 Transfer Case: NP231J Front Axle: Narrowed HP Dana44 Rear Axle: Dana44 Tires: 35x12.5x15 Lift Specifications: about 5.5" w/ DIY Long ArmZ Misc Accessories: OBA, Bunch of DIY stuff	We all need a hand once in a while. A few minutes worth of wrenchin' doesn't cost anyone anything. __________________ 9/11 - WE WILL NEVER FORGET!! (<---<< click)

08-30-2009, 11:23 PM	#13
FrankZ Cherokee Forum Vendor Join Date: Apr 2008 Location: Colorado Springs Posts: 2,566 My Photos 1997 Cherokee Year: 1997 Model: Cherokee Engine: 4.6L Stoker Transmission: AW4 Transfer Case: NP231J Front Axle: Narrowed HP Dana44 Rear Axle: Dana44 Tires: 35x12.5x15 Lift Specifications: about 5.5" w/ DIY Long ArmZ Misc Accessories: OBA, Bunch of DIY stuff	Thank you. __________________ 9/11 - WE WILL NEVER FORGET!! (<---<< click)

08-31-2009, 08:05 AM	#14
COSXJFAN BROWN CHICKEN, BROWN COW! Join Date: Apr 2008 Location: Colorado Springs Posts: 5,780 My Photos 1987 Wagokee Year: 1987 Wagokee Engine: 4.0 Renny Transmission: AW-4 Transfer Case: NP 242 HD drive shaft Front Axle: HP non-C.A.D. Dana 30 w/ 4.88s (locked) Rear Axle: Dana 44 w/ 4.88s (locked) Tires: 33X12.5-15 Pro Comp MTs Lift Specifications: Hodgepodge 6.5 front 5.5 rear Misc Accessories: custom 2.5" exhaust, cold air intake, homebrew bumpers & armor, winch	Glad it all went well!! Nice work Frank!! __________________ STEELER FAN TIL DEATH!!! BAN OWNERS, NOT BREEDS!!! AMERICAN PIT BULL TERRIERS ARE GREAT PETS!!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New from Colorado	lestatsghost	Introductions	18	02-22-2010 01:45 AM
Hello from Colorado	lifted1994xj	Introductions	8	09-02-2009 09:43 PM
New Guy from Colorado....Again	Locked93	Introductions	12	08-16-2009 05:18 PM
Jeep XJ 5.5 Rear Leaf Springs as well as Coil Springs	VelteXJ	Wanted	1	06-20-2009 02:41 PM
Hey from Colorado	Tanishunter	Introductions	12	09-01-2008 07:31 AM