4.6L Stroker for sale
#1
CF Veteran
Thread Starter
4.6L Stroker for sale
I'll be getting the freshly ground and polished crank and the massaged connecting rods back from the shop the first part of next week and will be reassembling it shortly there after.
The specs':
96 Block bored .040" over
Silvolite Pistons with a 20cc dish
12 CW crankshaft
4.2L connecting Rods
New Rod, Main, and Cam bearings (Clevite 77)
Crower Baja Beast Cam
Crower Cam Saver Lifters
Melling Oil Pump
Recent 3 angle valve job on the head
Head CC'd at 59cc
Block decked .018"
Head plained at .08"
Compression Ratio 9.435:1
Distributor
Plug Wires
Bosch Platinum 4 Sparkplugs
FlexPlate
All of the accessories (Starter, New-ish Alternator, Power Steering Pump, A/C Compressor)
Ford 5.0 24lb Injectors
1999 Curved Runner Intake
$2500
This is a steal! The machining alone cost over $2k.
The specs':
96 Block bored .040" over
Silvolite Pistons with a 20cc dish
12 CW crankshaft
4.2L connecting Rods
New Rod, Main, and Cam bearings (Clevite 77)
Crower Baja Beast Cam
Crower Cam Saver Lifters
Melling Oil Pump
Recent 3 angle valve job on the head
Head CC'd at 59cc
Block decked .018"
Head plained at .08"
Compression Ratio 9.435:1
Distributor
Plug Wires
Bosch Platinum 4 Sparkplugs
FlexPlate
All of the accessories (Starter, New-ish Alternator, Power Steering Pump, A/C Compressor)
Ford 5.0 24lb Injectors
1999 Curved Runner Intake
$2500
This is a steal! The machining alone cost over $2k.
#2
Newbie
Join Date: Sep 2009
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2006
Model: Wagoneer
Engine: 4.0
I was thinking of purchasing a 4.6 stroker motor from Titan $2,499 or Golan $ 3499. I was wondering why you wanted to sell yours after you put all that money into it ?
#5
Newbie
Join Date: Sep 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.2
? on the stroker
Frank,
?1 = is the engine still for sale?
?2 = I have a 1989 Wrangler with the 4.2 engine today. What would I need to do to both fit this engine in and make it run correctly?
?1 = is the engine still for sale?
?2 = I have a 1989 Wrangler with the 4.2 engine today. What would I need to do to both fit this engine in and make it run correctly?
I'll be getting the freshly ground and polished crank and the massaged connecting rods back from the shop the first part of next week and will be reassembling it shortly there after.
The specs':
96 Block bored .040" over
Silvolite Pistons with a 20cc dish
12 CW crankshaft
4.2L connecting Rods
New Rod, Main, and Cam bearings (Clevite 77)
Crower Baja Beast Cam
Crower Cam Saver Lifters
Melling Oil Pump
Recent 3 angle valve job on the head
Head CC'd at 59cc
Block decked .018"
Head plained at .08"
Compression Ratio 9.435:1
Distributor
Plug Wires
Bosch Platinum 4 Sparkplugs
FlexPlate
All of the accessories (Starter, New-ish Alternator, Power Steering Pump, A/C Compressor)
Ford 5.0 24lb Injectors
1999 Curved Runner Intake
$2500
This is a steal! The machining alone cost over $2k.
The specs':
96 Block bored .040" over
Silvolite Pistons with a 20cc dish
12 CW crankshaft
4.2L connecting Rods
New Rod, Main, and Cam bearings (Clevite 77)
Crower Baja Beast Cam
Crower Cam Saver Lifters
Melling Oil Pump
Recent 3 angle valve job on the head
Head CC'd at 59cc
Block decked .018"
Head plained at .08"
Compression Ratio 9.435:1
Distributor
Plug Wires
Bosch Platinum 4 Sparkplugs
FlexPlate
All of the accessories (Starter, New-ish Alternator, Power Steering Pump, A/C Compressor)
Ford 5.0 24lb Injectors
1999 Curved Runner Intake
$2500
This is a steal! The machining alone cost over $2k.
#6
CF Veteran
Thread Starter
Well, yes and no. I've been waiting for a deposit check for a few weeks from a buyer. If it doesn't show up in the next few days then it will be up for grabs again.
Trending Topics
#9
CF Veteran
Thread Starter
Still for sale folks, and I'm tired of getting pulled around by the short hairs by the last "buyer" over at NAXJA.
So if anyone out there wants a drop-in, turnkey stroker that's a freakin' amazing value....
You know where to find me.
So if anyone out there wants a drop-in, turnkey stroker that's a freakin' amazing value....
You know where to find me.
#12
Newbie
Join Date: Sep 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.2
#13
CF Veteran
Thread Starter
I got a PM last night from a local guy that wants it. Obviously it makes more sense to take a locals cash first.
That being said;
Since I got screwed the last time someone "local" promised me a deposit, I'll give him 1 week. After that I'll move on to the next person.
That being said;
Since I got screwed the last time someone "local" promised me a deposit, I'll give him 1 week. After that I'll move on to the next person.
#14
Newbie
Join Date: Sep 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.2
I'm also local. Live in Monument and work in CS. If you dont mind send me your contact information. I would like to pick your brain on putting the engine into a 88 Wrangler. This way if your current buyer does not work out I'll have cash on hand. 1@vanderoef.net.
#15
Newbie
Join Date: Sep 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.2
In fact it sounds like you have quite the shop over there. I would not mind taking the lazy man's way out and have you install the engine for an additional price. Just something else we can talk about.