LAS VEGAS XJ GROUP-----> 1st ROLL CALL.
Senior Member
Join Date: Apr 2014
Location: las vegas, nv
Posts: 840
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: I6 H.O, 99 manifold, APN header, neon injectors, cowl intake, screamin demon ignition system
Does anyone have custom air breather for valve cover they can post a pic of
Member
Join Date: Dec 2013
Location: Las Vegas
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Benjammin, let me know if the 'pad' on that mount is wide enough for the hole you need to mount the antenna, I can make the pad wider.
Member
Join Date: Dec 2013
Location: Las Vegas
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
If you have a 220 outlet I could be coerced into bringing the welder to you.
Member
Join Date: Dec 2013
Location: Las Vegas
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
I got my Rustys coils in and it sits great, they are the HD coils so they are pretty firm which I like. Bilstein 5100s went in up front too. Sits almost level.
Here are the HD relocators installed, shackle angle needs some work.
And this is why I need a flatbelly skid, my Clocking ring needs to show up. Also got some axle, DS rash.
Here are the HD relocators installed, shackle angle needs some work.
And this is why I need a flatbelly skid, my Clocking ring needs to show up. Also got some axle, DS rash.
Senior Member
Join Date: Apr 2014
Location: las vegas, nv
Posts: 840
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: I6 H.O, 99 manifold, APN header, neon injectors, cowl intake, screamin demon ignition system
I got my Rustys coils in and it sits great, they are the HD coils so they are pretty firm which I like. Bilstein 5100s went in up front too. Sits almost level.
Here are the HD relocators installed, shackle angle needs some work.
And this is why I need a flatbelly skid, my Clocking ring needs to show up. Also got some axle, DS rash.
Here are the HD relocators installed, shackle angle needs some work.
And this is why I need a flatbelly skid, my Clocking ring needs to show up. Also got some axle, DS rash.
Ill let u know Thursday after I get everything from amazon!
Senior Member
Join Date: Apr 2014
Location: las vegas, nv
Posts: 840
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: I6 H.O, 99 manifold, APN header, neon injectors, cowl intake, screamin demon ignition system
So my headlights are cutting out on and off. They are almost flashing. Does this mean I need a headlight harness?
Member
Join Date: Dec 2013
Location: Las Vegas
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
If they start flashing again, pull in your turn signal stalk like your are trying to flash someone with your brights. If your lights stay on 'brights' and don't flicker I would say its the headlight ****/switch on the dash. When I first got my jeep they flashed a bit and went out completely unless I was holding the momentary 'brights' switch(pull and hold towards you on the turn signal stalk).
Member
Join Date: Sep 2014
Location: Cleveland, OH
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L