89limited_hero

Installed my track bar added some d-rings to the front bumper welded the top driver side door hinge then I cut two big holes in my hood for my hood vents. Phone was dead so no pics yet. They will be in my build when I can get them.

Dirt Diver

That pic with both XJs in the snow is awesome!

Mountaindog

swapped my bumper , changed coolant , put new bunny burners on , then it snowed lol

88jeepcherokeexj

Replaced the broken wing window and tried to break something. Also finished up building a drift trike for a friend. Going to Start building mine tomorrow

mitch90

I ripped my LCA mount off the body. So now I'm trying to build my own long arms but having a few problems. First I just replaced my old arms with new IronRock adjustable arms bout a month ago. Got about two trips out of them. So that leads to not wanting to cut Em up or anything. So I build extensions for them out of DOM tubing, and some big *** nuts and bolts. Next is how I set up my arms, I can figure out how to connect my uppers to the lowers. Can anyone give me some help on this?





Here are the adapters/extensions I made all finished

As you can see. I have some significant space between the lowers and uppers where they need to attatch

SatiricalHen

I flushed my heater core then back flushed it then repeated the process about 15 times of not more and finally chunks and green and black water stopped coming out.... Now I should be able to feel my toes on the way to school! But I still need to flush the rest of the cooling system now probably. If the rest of the cooling system is as bad as the heater core was.... This will get interesting... Now just have to figure out how to flush the rest of the system

SHANE 87

I wheeled my jeep today

baseballplaya2369

Replaced my heim joint on my track bar, installed some LED lights in the rear, fixed my backup lights, and mounted my hi lift on my rear bumper.

1999 xj

Hot knifed my new old tires soon to be on my rig

W3G

ordered a set of Notch Custom flares for my 2000 XJ

MoparNJeep

Post pics when done. Those are what I was looking into awhile back.

93_xjcherokee

Broke 3 tools trying to change my passenger ball joint. A 1/2 inch x3 extension, a 1/2 inch gm breaker bar and a Stanley wrench

MUDRUNNER AZ

Ordered don 2 in Johnny joints from currie to replace the crappy heims on the trackbar.

RacerX

...never hot-knifed a tire before - bet it smokes a lot

So, hot do ya go about doin' that?

aroundincircles

installed my CB radio in my jeep. Glad to have it, not sure why I've put it off for so long.