Tube doors, bumpers, sliders

esms06 · 08-28-2009, 12:31 AM

If you put on tube doors what do you do for music? do you have to place them some where else? also wondering if if anybody had any good blue prints or measurements for a a front and rear bumper and rock sliders. Found somebody on my ship that fabricate it. thanks

jeepnleo · 08-28-2009, 12:55 AM

I can take measurements off mine.

Rear speakers in hatch.

jeepnleo · 08-28-2009, 12:55 AM

I can take measurements off mine.

Rear speakers in hatch.

1990cherokee · 08-28-2009, 10:28 AM

yes please do take the measurements off yours and if u could pm them to me. I wanna make some.

tampaviking · 08-28-2009, 10:40 AM

You could fit some speakers underneath the backseat.

krkx93 · 09-28-2009, 07:52 PM

i got a headliner out of an 01 with speakers in it ran the wires from my amp. i have 2 6 x9s on the back floor 2 10 in. subs and i just wired a quick disco plug for the door speakers when i want them off and they also make a sound pod deal that goes in that front plastic panel that fits a speaker on each side but mines a standard and i didnt want it to get in the way of my clutch pedal

DHFHades · 10-30-2009, 02:50 AM

http://www.qlogicfactoryoutlet.com/i...Path=3169_3849

these guys make kick panels for speakers, not a wide range of years to pick from though...

08-28-2009, 12:31 AM	#1
esms06 Junior Member Join Date: Jul 2009 Posts: 45 My Photos	Tube doors, bumpers, sliders If you put on tube doors what do you do for music? do you have to place them some where else? also wondering if if anybody had any good blue prints or measurements for a a front and rear bumper and rock sliders. Found somebody on my ship that fabricate it. thanks

08-28-2009, 12:55 AM	#2
jeepnleo Seasoned Member Join Date: Feb 2009 Posts: 356 My Photos 1990 Cherokee Year: 1990 Model: Cherokee Transmission: 4.0l Transfer Case: np231 Front Axle: d30 Rear Axle: d35 Tires: stock Lift Specifications: stock Misc Accessories: custom intake	I can take measurements off mine. Rear speakers in hatch. __________________ 1990 sport 4.0l d30 d35 np231 3inch lift(spacers and AAL maybe procomp,31x10.5 dunlop mud rovers,trimmed fenders, rough country rock sliders http://www.flickr.com/photos/onsightphotography/

08-28-2009, 12:55 AM	#3
jeepnleo Seasoned Member Join Date: Feb 2009 Posts: 356 My Photos 1990 Cherokee Year: 1990 Model: Cherokee Transmission: 4.0l Transfer Case: np231 Front Axle: d30 Rear Axle: d35 Tires: stock Lift Specifications: stock Misc Accessories: custom intake	I can take measurements off mine. Rear speakers in hatch. __________________ 1990 sport 4.0l d30 d35 np231 3inch lift(spacers and AAL maybe procomp,31x10.5 dunlop mud rovers,trimmed fenders, rough country rock sliders http://www.flickr.com/photos/onsightphotography/

08-28-2009, 10:40 AM	#5
tampaviking Senior Member Join Date: Sep 2008 Location: Ft. Lewis, Wa Posts: 774 My Photos 1987 Cherokee Year: 1987 Model: Cherokee Engine: 4.0 Transmission: AW4 Transfer Case: 242 Front Axle: dana 30 Rear Axle: dana 44 Tires: 35" BFG Muds Lift Specifications: 5" Misc Accessories: fixed lower control arms, HD trackbar and mount	You could fit some speakers underneath the backseat. __________________ 87 30/44 with 4.88 gears, Aussie, Drop brackets too many junkyard upgrades

09-28-2009, 07:52 PM	#6
krkx93 Senior Member Join Date: Sep 2009 Location: louisiana Posts: 711 My Photos 1994 Cherokee Year: 1994 Model: Cherokee Engine: 2.5L Transmission: 5 speed Transfer Case: np231 Front Axle: d30 Rear Axle: ch. 8.25 Tires: 31 in. liberator a/ts Lift Specifications: 3 in. rc + 2 in. bb for 5 in, Misc Accessories: home made grill guard deal little bits here and there	i got a headliner out of an 01 with speakers in it ran the wires from my amp. i have 2 6 x9s on the back floor 2 10 in. subs and i just wired a quick disco plug for the door speakers when i want them off and they also make a sound pod deal that goes in that front plastic panel that fits a speaker on each side but mines a standard and i didnt want it to get in the way of my clutch pedal __________________ no half measures... build thread. check it out http://www.cherokeeforum.com/f46/down-south-jeep-30873/

08-28-2009, 10:28 AM	#4
1990cherokee Seasoned Member Join Date: Jul 2009 Location: Yelm Wa Posts: 449 My Photos 1990 Cherokee Year: 1990 Model: Cherokee Engine: 4.0 Transmission: aw4 Transfer Case: 231 Front Axle: dana 30 with 4.56 gears Rear Axle: 8.25 with 4.56 gears and aussie locker Tires: 33's Lift Specifications: 4.5 will soon be upgrading to LA or to a 6.5 LA	yes please do take the measurements off yours and if u could pm them to me. I wanna make some.

10-30-2009, 02:50 AM	#7
DHFHades Junior Member Join Date: Oct 2009 Location: Vancouver, WA Posts: 42 My Photos 1990 Cherokee Year: 1990 Model: Cherokee Engine: 4.0 Transmission: auto Transfer Case: no clue Front Axle: Dana 30 Rear Axle: Dana 35 Tires: Maxxis Bighorn 31 10.50 15 Lift Specifications: 3 inch Misc Accessories: roof rack, smittybilt bumpers, and tons of aux lighting	http://www.qlogicfactoryoutlet.com/i...Path=3169_3849 these guys make kick panels for speakers, not a wide range of years to pick from though... __________________ 1990 Jeep Cherokee 4X4 3 inch lift sittin' on 31 10.50 15s

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wtb sliders/bumpers	jeepweezer	Wanted	4	07-31-2009 04:54 PM
Regarding tube bumpers...	Oath	Cherokee Tech	5	06-21-2009 10:05 AM
tube doors?	95Forrest	Cherokee Tech	16	05-24-2009 01:46 AM
tube doors	jcherokee94	Cherokee Tech	8	04-25-2009 04:22 AM