Take 2 @ whidbey crawler
07-24-2013, 09:44 AM
#31
Senior Member
Thread Starter
Join Date: Oct 2011
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
07-24-2013, 03:04 PM
#33
Senior Member
Thread Starter
Join Date: Oct 2011
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
I'm looking forward to having the axle done to! Then I won't be spending so much money like I am right now. Haha. Plus I won't be constantly worried about breaking the old 30 with it locked and 35's. plus I'm also looking forward to the unlocking hubs.
07-25-2013, 05:28 PM
#34
Senior Member
Thread Starter
Join Date: Oct 2011
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Well I got some more work done on the truss/ mounts. Used 3/8" plate to go up and over the dif, then across to the passenger side mount. Gunna use some 3/16" to make the upper passenger side mount. And weld the drivers side mount directly to the 3/8's over the dif.
08-02-2013, 01:02 AM
#35
Senior Member
Thread Starter
Join Date: Oct 2011
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Well I finished up all the mounts on the 44,
Got the old tired turdy 30 out,
And wrestled the heavy *** 44 into place to check fitment and design and build the steering and track bar mount. Then it will be pulled again, painted disassembled and taken in to be geared. Then goes on all the cool new parts! Getting close
Got the old tired turdy 30 out,
And wrestled the heavy *** 44 into place to check fitment and design and build the steering and track bar mount. Then it will be pulled again, painted disassembled and taken in to be geared. Then goes on all the cool new parts! Getting close
08-06-2013, 06:11 PM
#36
Senior Member
Thread Starter
Join Date: Oct 2011
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Got in my order of gears, overhaul/install kit, u joints, and steering. Also ordered up a spartan locker today as well and will be dropping off the axle to be geared on Tuesday.
Also welded up the DIY dif cover the other day.
Also welded up the DIY dif cover the other day.
08-13-2013, 01:07 AM
#39
Senior Member
Thread Starter
Join Date: Oct 2011
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
08-13-2013, 05:20 PM
#40
Senior Member
Thread Starter
Join Date: Oct 2011
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Tore down the axle today. Painted up the spots I missed. And decided to clear coat the dif cover leaving it in the bare metal finish. Also pulled off the rear tires, and bolted up the rear adaptors. All set to drop off the axle on Friday, given that the spartan shows up that morning!
09-28-2013, 09:00 PM
#41
Senior Member
Thread Starter
Join Date: Oct 2011
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Well the jeeps back on the road been beating on the axle hard and havnt had any problems! 
Also built a steering box brace. Then picked up a new light for the Jeep 
Also got a new Job working at a 4 wheeling shop, been building some awesome rigs lately. Stretching a TJ front and rear king coil overs custom rear 4 link. Aside from the 46 miles one way commute it's a bad *** job.
Also built a steering box brace. Then picked up a new light for the Jeep 
Also got a new Job working at a 4 wheeling shop, been building some awesome rigs lately. Stretching a TJ front and rear king coil overs custom rear 4 link. Aside from the 46 miles one way commute it's a bad *** job.
Last edited by busted-knuckles; 09-28-2013 at 09:04 PM.
09-28-2013, 09:37 PM
#42
CF Veteran
Join Date: Aug 2012
Location: oregon
Posts: 1,592
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 ho 99 intake ps pump 1" tb spacer 62mm bored tb eletric fans and more
this rig is nice man hope to see it in person one of these days
